PARTsolutions стандарты
Стратегическое управление частями PARTsolutions от CADENAS-а позволяет инженерам доступ к данным всех, часто используемых стандартных компонентов
С перечнем доступных стандартов можете ознакомиться здесь:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
ISO 1609 | Bolted flanges |
ISO 1609 | Collars for clamped or rotatable flanges |
ISO 1609 | Rotatable flanges with retaining ring |
ISO 1609 | Vacuum flanges |
ISO 1609 | Vacuum flanges with recess |
ISO 6162-1 FCS | Split flange clamps |
ISO 6162-1 FH | Flanged heads, form FH |
ISO 6162-1 FHG | Flanged heads, form FHG |
ISO 6162-1 FHGO | Flanged heads with O-ring, form FHGO |
ISO 6162-1 O | O-rings |
ISO 6162-1 FCS | Assembled flange connections with split flange clamp (FCS or FCSM) |
ISO 6162-1 FC | One-piece flange clamps, form FC |
ISO 6162-1 FC | Assembled flange connections with one-piece flange clamp (FC or FCM) |
ISO 6162-2 FCS | Split flange clamps |
ISO 6162-2 FC | One-piece flange clamps, form FC |
ISO 6162-2 FH | Flange tubes with slot, form FH |
ISO 6162-2 FHG | Flange tubes with slot, form FHG |
ISO 6162-2 FHGO | Flange tubes with slot and O-ring, form FHGO |
ISO 6162-2 O | O-rings |
ISO 6162-2 FP | Flange connectors with one-piece flange clamps, form FP |
ISO 6162-2 FPS | Flange connectors with split flange clamps, form FPS |
ISO 7005-1 PN 2.5 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 6 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 10 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 16 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 20 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 25 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 40 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 50 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 110 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 150 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 260 | Metallic flanges - Part 1: Steel flanges |
ISO 7005-1 PN 420 | Metallic flanges - Part 1: Steel flanges |
ISO 1609 | Tubes for vacuum flanges |
ISO 2938 | Hollow steel bars for machining |
ISO 3183 | Steel pipes for pipeline transportation systems |
ISO 4200 | Plain end steel tubes, welded and seamless |
ISO 8535-1 | Steel tubes for high-preassure fuel injection pipes |
ISO 10763 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes |
ISO 15494 R | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), pipes |
ISO 15494 FS-HE-M-A | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), socket fusion fittings, type A |
ISO 15494 FS-HE-M-B | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), socket fusion fittings, type B |
ISO 15494 FS-HE-S | Plastic piping systems for industrial applications - Polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), butt fusion fittings |
ISO 15494 FS-HWSS | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), electrofusion fittings |
ISO 15494 VB | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), flange adaptors |
ISO 15494 LF | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), loose backing flanges |
ISO 7638-1 Park power socket | Electrical connectors for braking system, park power sockets |
ISO 7638-1 Power socket | Electrical connectors for braking system, power sockets |
ISO 7638-1 Connector | Electrical connectors for braking systems, connectors |
ISO 10243 | Compression springs with rectangular section |
ISO 18286 | Hot-rolled stainless steel plates |
ISO 9445 BL | Continuously rolled sheet metal from rustproof steel |
ISO 9445 KB | Continuously rolled cold rolled strip (volume in widths smaller than 600mm) from rustproof steel |
ISO 9445 KBB | Continuously rolled cold broadband (volume in roles more largely than 600mm) from rustproof steel |
ISO 9445 KBS | Continuously rolled cold rolled strip in staffs from rustproof steel |
ISO 16120-2 R | Non-alloy wire rods for conversion to wire |
ISO 16120-2 SQ | Non-alloy wire rods for conversion to wire |
ISO 16120-2 HEX | Non-alloy wire rods for conversion to wire |
ISO 16120-2 RC | Non-alloy wire rods for conversion to wire |
ISO 4783-2 | WWire screen |
ISO 4783-3 A | On both sides curled woven wire cloth |
ISO 4783-3 B | Uniaxial between curled woven wire cloth |
ISO 4783-3 C | On both side between curled woven wire cloth |
ISO 4783-3 D | On both sides before cranked woven wire cloth |
ISO 4783-3 E | On both sides before cranked woven wire cloth, smooth-sided |
ISO 4783-3 F | Press welded woven wire cloth |
ISO 2020-1 | Aerospace - Preformed flexible steel wire ropes for aircraft controls |
ISO 14632 | Plates from PE |
ISO 15527 | Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) |
ISO 1127 | Stainless steel tubes |
ISO 6931-1 | Spring steel wires |
ISO 6020-1 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MF1 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MF2 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MF3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MF4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MP3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MP4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MP5 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MP6 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MS2 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6020-1 MT4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
ISO 6022 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MF3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MF4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MP3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MP4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MP5 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MP6 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 6022 MT4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
ISO 8132 AP2 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP2 - Clevis with female threads |
ISO 8132 AF3 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AF3 - Flange head, round |
ISO 8132 AB4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AB4 - Fork swivel bearing block, just |
ISO 8132 AB3 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AB3 - Fork swivel bearing block, angularly |
ISO 8132 AT4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AT4 - Bearing block for trunnion execution |
ISO 8132 AA8 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AA8 - Pin for clevis or rod eye (splint pin or snap ring design) |
ISO 8132 AP6 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP6 - Joint head with female threads |
ISO 8132 AP4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP4 - Swivel head with female threads |
ISO 8132 AA4-R | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA4-R - Pin for swivel head (circlip or snap ring version) |
ISO 8132 AA6-R | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA6-R - Pin for joint head (circlip or snap ring version) |
ISO 8132 AA4-S | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA4-S - Pin for swivel head (split pins) |
ISO 8132 AA6-S | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA6-S - Pin for joint head (split pins) |
ISO 1002 Table 1 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 0 |
ISO 1002 Table 2 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 3 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9 |
ISO 1002 Table 4 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 5 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 6 | Single row barrel roller bearing, seal or deck washer, diameter row 3 |
ISO 1002 Table 11 | Single row radial deep groove ball bearing with seal or deck washer |
ISO 1002 Table 12 | Single row radial deep groove ball bearing with seal or deck washer |
ISO 1002 Table 13 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
ISO 1002 Table 14 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
ISO 1002 Table 15 | Double row angular contact radial ball bearing with seal washer |
ISO 1002 Table 16 | Double row self aligning roller bearings with seal or deck washer |
ISO 1002 Table 17 | Single row barrel roller bearings with deck washer |
ISO 1002 Table 18 | Double row barrel roller bearing with deck washer |
ISO 1002 Table 19 | Needle roller bearings with deck washer |
ISO 1002 Table 20 | Needle roller bearing, support rolls, single row, with deck washer |
ISO 1002 Table 21 | Needle roller bearing, support rolls, double row, with deck washer |
ISO 1002 Table 1 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 0 |
ISO 1002 Table 2 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 3 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9 |
ISO 1002 Table 4 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 5 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
ISO 1002 Table 6 | Single row barrel roller bearing, seal or deck washer, diameter row 3 |
ISO 1002 Table 11 | Single row radial deep groove ball bearing with seal or deck washer |
ISO 1002 Table 12 | Single row radial deep groove ball bearing with seal or deck washer |
ISO 1002 Table 13 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
ISO 1002 Table 14 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
ISO 1002 Table 15 | Double row angular contact radial ball bearing with seal washer |
ISO 1002 Table 16 | Double row self aligning roller bearings with seal or deck washer |
ISO 1002 Table 17 | Single row barrel roller bearings with deck washer |
ISO 1002 Table 18 | Double row barrel roller bearing with deck washer |
ISO 1002 Table 19 | Needle roller bearings with deck washer |
ISO 1002 Table 20 | Needle roller bearing, support rolls, single row, with deck washer |
ISO 1002 Table 21 | Needle roller bearing, support rolls, double row, with deck washer |
ISO 355 series 2-1 | Single-row tapered roller bearings, series 2 figure 1 |
ISO 355 series 2-1 | Single-row tapered roller bearings, series 2 figure 1 |
ISO 355 series 3-1 | Single-row tapered roller bearings, series 3 figure 1 |
ISO 355 series 3-1 | Single-row tapered roller bearings, series 3 figure 1 |
ISO 355 series 4-1 | Single-row tapered roller bearings, series 4 figure 1 |
ISO 355 series 4-1 | Single-row tapered roller bearings, series 4 figure 1 |
ISO 355 series 5-1 | Single-row tapered roller bearings, series 5 figure 1 |
ISO 355 series 5-1 | Single-row tapered roller bearings, series 5 figure 1 |
ISO 355 series 7-1 | Single-row tapered roller bearings, series 7 figure 1 |
ISO 355 series 7-1 | Single-row tapered roller bearings, series 7 figure 1 |
ISO 355 series 2-4 | Single-row tapered roller bearings with flanged outer ring, series 2 figure 4 |
ISO 355 series 3-4 | Single-row tapered roller bearings with flanged outer ring, series 3 figure 4 |
ISO 355 series 4-4 | Single-row tapered roller bearings with flanged outer ring, series 4 figure 4 |
ISO 355 series 7-4 | Single-row tapered roller bearings with flanged outer ring, series 7 figure 4 |
ISO 355 series 2-4 | Single-row tapered roller bearings with flanged outer ring, series 2 figure 4 |
ISO 355 series 3-4 | Single-row tapered roller bearings with flanged outer ring, series 3 figure 4 |
ISO 355 series 4-4 | Single-row tapered roller bearings with flanged outer ring, series 4 figure 4 |
ISO 355 series 7-4 | Single-row tapered roller bearings with flanged outer ring, series 7 figure 4 |
ISO 355 series 2-2 | Double-row tapered roller bearings with double raceway outer ring, series 2 figure 2 |
ISO 355 series 3-2 | Double-row tapered roller bearings with double raceway outer ring, series 3 figure 2 |
ISO 355 series 4-2 | Double-row tapered roller bearings with double raceway outer ring, series 4 figure 2 |
ISO 355 series 7-2 | Double-row tapered roller bearings with double raceway outer ring, series 7 figure 2 |
ISO 355 series 2-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 2 figure 3 |
ISO 355 series 3-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 3 figure 3 |
ISO 355 series 4-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 4 figure 3 |
ISO 355 series 7-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 7 figure 3 |
ISO 355 series 2-2 | Double-row tapered roller bearings with double raceway outer ring, series 2 figure 2 |
ISO 355 series 3-2 | Double-row tapered roller bearings with double raceway outer ring, series 3 figure 2 |
ISO 355 series 4-2 | Double-row tapered roller bearings with double raceway outer ring, series 4 figure 2 |
ISO 355 series 7-2 | Double-row tapered roller bearings with double raceway outer ring, series 7 figure 2 |
ISO 355 series 2-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 2 figure 3 |
ISO 355 series 3-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 3 figure 3 |
ISO 355 series 4-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 4 figure 3 |
ISO 355 series 7-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 7 figure 3 |
ISO 12240-1 C | Spherical plain radial bearings, form C |
ISO 12240-1 E | Spherical plain radial bearings, form E |
ISO 12240-1 G | Spherical plain radial bearings, form G |
ISO 12240-1 H | Spherical plain radial bearings, form H |
ISO 12240-1 K | Spherical plain radial bearings, form K |
ISO 12240-1 W | Spherical plain radial bearings, form W |
ISO 12240-2 | Spherical plain bearings - Part 2: Angular cantact radial spherical plain |
ISO 12240-3 | Spherical plain bearing - Part 3: Thrust spherical plain bearings |
ISO 12240-4 F | Joint heads with inner thread form F |
ISO 12240-4 M | Joint heads with outer thread, form M |
ISO 12240-4 S | Joint heads with welding end, form S |
ISO 2795 | Plain bearings - Sintered bushes - Cylindrical bearings |
ISO 2795 | Plain bearings - Sintered bushes - Flanged bearings |
ISO 2795 | Plain bearings - Sintered bushes - Spherical bearings |
ISO 3547-1 C | Plain bearings - Wrapped bushes, type C cylindrical bush |
ISO 3547-1 F | Plain bearings - Wrapped bushes, type F flanged bush |
ISO 4379 C | Plain bearing - Copper alloy bushes, form C |
ISO 4379 F | Plain bearings - Copper alloy bushes, form F |
ISO 2982-1 A | Rolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type A |
ISO 2982-1 B | Rolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type B |
ISO 2982-1 C | Rolling bearings - Accessories - Part 1: Tapered sleeves, withdrawal sleeves with taper 1:12 and 1:30 type C |
ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, locking clips |
ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices |
ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, bent tab lockwashers |
ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, straight tab lockwashers |
ISO 3290-1 | Rolling bearings - Balls - Part1: Steel balls |
ISO 3290-2 | Rolling bearings - Balls - Part2: Ceramic balls |
ISO 10511 | Prevailing torque type hexagon, thin nuts, (with non-metallic insert) |
ISO 7040 | Prevailing torque type hexagon nuts, (with non-metallic insert), style1 |
ISO 7041 | Prevailing torque type hexagon nuts (with non-metalic insert), style 2 |
ISO 7042 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 |
ISO 10512 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch |
ISO 10513 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12 |
ISO 7719 | Prevailing torque type (all-metal hexagon nuts), type 1 – property classes 5, 8 and 10 |
ISO 4032 | Hexagon nuts, style 1 - Product grades A and B |
ISO 4034 | Hexagon nuts - Product grades C |
ISO 4033 | Hexagon nuts, style 2 - Product grades A and B |
ISO 4035 | Hexagon thin nuts (chamfered) - Product grades A and B |
ISO 4036 | Hexagon thin nuts (unchamfered) - Product grade B |
ISO 8673 | Hexagon nuts, type 1, with metric fine pitch thread |
ISO 8674 | Hexagon nuts, type 2, with metric fine pitch thread |
ISO 8675 | Hexagon thin nuts with metric fine pitch thread, Product grades A and B |
ISO 10663 | Hexagon nuts with flange, style 2, fine pitch thread |
ISO 21670 | Hexagon weld nuts with flange |
ISO 4161 | Hexagon nuts with flange - Coarse thread |
ISO 5599-1 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector |
ISO 8434-1 S | 24° cone connectors - Straight connection unions, form S |
ISO 8434-1 SC | 24° cone connectors - Straight connectors, form SC |
ISO 8434-1 SDS-F | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SDS-F |
ISO 8434-1 SDSC-F | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SDSC-F |
ISO 8434-1 SDS-E | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-2 or ISO 9974-2, form SDS-E |
ISO 8434-1 SDSC-E | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-2 or ISO 9974-2, form SDSC-E |
ISO 8434-1 SDS-B | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-4 or ISO 9974-3, form SDS-B |
ISO 8434-1 SDSC-B | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-4 or ISO 9974-3, form SDSC-B |
ISO 8434-1 SWOSDS-E | 24° cone connectors - Straight adjustable screw-in socket with elastomer seal with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-E |
ISO 8434-1 SWOSDS-F | 24° cone connectors - Straight adjustable screw-in socket with O-ring with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-F |
ISO 8434-1 SWOSDS-B_Metric | 24° cone connectors - Straight adjustable screw-in socket with metallic seal with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-B |
ISO 8434-1 SWODS-E | 24° cone connectors - Straight adjustable screw-in socket with elastomer seal with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-E |
ISO 8434-1 SWODS-F | 24° cone connectors - Straight adjustable screw-in socket with O-ring with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-F |
ISO 8434-1 SWODS-B | 24° cone connectors - Straight adjustable screw-in socket with metallic seal with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-B |
ISO 8434-1 E | 24° cone connectors - Pipe unions with elbow 90°, form E |
ISO 8434-1 EC | 24° cone connectors - Connectors with elbow 90°, form EC |
ISO 8434-1 SWOE | 24° cone connectors - Directionally adjustable elbow connectors with O-ring, form SWOE |
ISO 8434-1 SWOEC | 24° cone connectors - Directionally adjustable elbow connectors with O-ring, form SWOEC |
ISO 8434-1 T | 24° cone connectors - Pipe T-unions, form T |
ISO 8434-1 TC | 24° cone connectors - T-connectors, form TC |
ISO 8434-1 SWORT | 24° cone connectors - T-pieces / continuity with O-ring, form SWORT |
ISO 8434-1 SWORTC | 24° cone connectors - T-connectors / continuity with O-ring, form SWORTC |
ISO 8434-1 SWOBT | 24° cone connectors - T-pieces / outlet with O-ring, form SWOBT |
ISO 8434-1 SWOBTC | 24° cone connectors - T-connectors / outlet with O-ring, form SWOBTC |
ISO 8434-1 K | 24° cone connectors - Cross union fittings, form K |
ISO 8434-1 KC | 24° cone connectors - Cross connesctors, form KC |
ISO 8434-1 BHS | 24° cone connectors - Straight bulkheads, form BHS |
ISO 8434-1 BHSC | 24° cone connectors - Straight bulkhead connectors, form BHSC |
ISO 8434-1 BHE | 24° cone connectors - Angle bulkheads, form BHE |
ISO 8434-1 BHEC | 24° cone connectors - Angle bulkhead connectors, form BHEC |
ISO 8434-1 WDBHS | 24° cone connectors - Straight welded bulkheads, form WDBHS |
ISO 8434-1 WDBHSC | 24° cone connectors - Straight welded bulkhead connectors, form WDBHSC |
ISO 8434-1 RDSW | 24° cone connectors - Just directionally adjustable reducers with O-ring, form RDSW |
ISO 8434-1 RDSWC | 24° cone connectors - Just directionally adjustable connectors with O-ring, form RDSWC |
ISO 8434-1 WDNP-A | 24° cone connectors - Weld nipples, form WDNP-A |
ISO 8434-1 WDNP-B | 24° cone connectors - Weld nipples, form WDNP-B |
ISO 8434-1 WDRDNP | 24° cone connectors - Reducing welding nipples, form WDRDNP |
ISO 8434-1 WDS | 24° cone connectors - Straight weld trims, form WDS |
ISO 8434-1 WDSC | 24° cone connectors - Straight connectors, form WDSC |
ISO 8434-1 PL | 24° cone connectors - Plugs with O-ring, form PL |
ISO 8434-1 CR | 24° cone connectors - Compression rings, Form CR |
ISO 8434-1 N | 24° cone connectors - Cap nuts, form N |
ISO 8434-1 LN | 24° cone connectors - Counternuts, form LN |
ISO 8434-1 Ring | 24° cone connectors - Rings |
ISO 8434-2 S | Straight union fittings, form S |
ISO 8434-2 SDS | Stud fittings with ISO 1179-3 non-adjustable stud ends, form SDS |
ISO 8434-2 SDS | Stud fittings with ISO 6149-3 non-adjustable stud ends, form SDS |
ISO 8434-2 SDS | Stud fittings with ISO 11926-3 non-adjustable stud ends, form SDS |
ISO 8434-2 E | Elbow union fittings, form E |
ISO 8434-2 SDE | Stud fittings with ISO 1179-3 90° adjustable stud elbows, form SDE |
ISO 8434-2 SDE45 | Stud fittings with ISO 1179-3 45° adjustable stud elbows, form SDE45 |
ISO 8434-2 SDE | Stud fittings with ISO 6149-3 90° adjustable stud elbows, form SDE |
ISO 8434-2 SDE45 | Stud fittings with ISO 6149-3 45° adjustable stud elbows, form SDE45 |
ISO 8434-2 SDE | Stud fittings with ISO 11926-3 90° adjustable stud elbows, form SDE |
ISO 8434-2 SDE45 | Stud fittings with ISO 11926-3 45° adjustable stud elbows, form SDE45 |
ISO 8434-2 T | Tee union fittings, form T |
ISO 8434-2 SDBT | Stud fittings with ISO 1179-3 adjustable stud branch tee, form SDBT |
ISO 8434-2 SDBT | Stud fittings with ISO 6149-3 adjustable stud branch tee, form SDBT |
ISO 8434-2 SDBT | Stud fittings with ISO 11926-3 adjustable stud branch tee, form SDBT |
ISO 8434-2 K | Cross union fittings, form K |
ISO 8434-2 SDRT | Stud fittings with ISO 1179-3 adjustable stud run tee, form SDRT |
ISO 8434-2 SDRT | Stud fittings with ISO 6149-3 adjustable stud run tee, form SDRT |
ISO 8434-2 SDRT | Stud fittings with ISO 11926-3 adjustable stud run tee, form SDRT |
ISO 8434-2 SWE | 90° swivel elbows, form SWE |
ISO 8434-2 SWBT | Swivel branch tees, form SWBT |
ISO 8434-2 SWRT | Swivel run tees, form SWRT |
ISO 8434-2 SWE45 | 45° swivel elbows, form SWE45 |
ISO 8434-2 BHS | 37° flared bulkhead union fittings, form BHS |
ISO 8434-2 BHE | 37° flared bulkhead union fittings, 90° bulkhead elbow, form BHE |
ISO 8434-2 BHE45 | 37° flared bulkhead union fittings, 45° bulkhead elbow, form BHE45 |
ISO 8434-2 BHBT | 37° flared bulkhead union fittings, bulkhead branch tee, form BHBT |
ISO 8434-2 BHRT | 37° flared bulkhead union fittings, bulkhead run tee, form BHRT |
ISO 8434-2 BHLN | Bulkhead locknuts, form BHLN |
ISO 8434-2 REE | Reducing elbows, form REE |
ISO 8434-2 RES | Reducing fittings, form RES |
ISO 8434-2 RERT | Reducing run tees, form RERT |
ISO 8434-2 REBT | Reducing branch tees, form REBT |
ISO 8434-2 MSL | Sleeves, form MSL |
ISO 8434-2 ISL | Sleeves, form ISL |
ISO 8434-2 N | Tube nuts, form N |
ISO 8434-2 CP | Caps, form CP |
ISO 8434-2 PL | Plugs, form PL |
ISO 8434-3 BRSL-A | Braze sleeves, form BRSL-A |
ISO 8434-3 BRSL-B | Braze sleeves, form BRSL-B |
ISO 8434-3 BRRDSL-A | Braze-on reducing sleeves, form BRRDSL-A |
ISO 8434-3 BRRDSL-B | Braze-on reducing sleeves, form BRRDSL-B |
ISO 8434-3 BRS | Braze-on straight connectors, form BRS |
ISO 8434-3 S | Straight union connectors, form S |
ISO 8434-3 SDS | Straight stud connectors, form SDS |
ISO 8434-3 SDSL | Long stud connectors, form SDSL |
ISO 8434-3 SDSWS | Stud straight swivels, form SDSWS |
ISO 8434-3 E | 90° elbow union connectors, form E |
ISO 8434-3 SDE | 90° adjustable stud elbows, form SDE |
ISO 8434-3 SDE45 | 45° adjustable stud elbows, form SDE45 |
ISO 8434-3 SDEL | Long drop elbow stud connectors, form SDEL |
ISO 8434-3 T | Tee union connectors, form T |
ISO 8434-3 SDBT | Adjustable stud branch tees, form SDBT |
ISO 8434-3 SDRT | Adjustable stud run tees, form SDRT |
ISO 8434-3 K | Cross union connectors, form K |
ISO 8434-3 SDK | Adjustable stud crosses, form SDK |
ISO 8434-3 SDSWE | Swivel 90° adjustable stud elbows, form SDSWE |
ISO 8434-3 SWBT | Swivel branch tees, form SWBT |
ISO 8434-3 SWE | Swivel elbows, form SWE |
ISO 8434-3 SWRT | Swivel run tees, form SWRT |
ISO 8434-3 BHS | Straight bulkheads, form BHS |
ISO 8434-3 BHE | 90° bulkhead elbows, form BHE |
ISO 8434-3 BHRT | Bulkhead run tees, form BHRT |
ISO 8434-3 BHBT | Bulkhead branch tees, form BHBT |
ISO 8434-3 BHE45 | 45° bulkhead elbows, form BHE45 |
ISO 8434-3 BHLN | Bulkhead locknuts, form BHLN |
ISO 8434-3 RDA | Reducers with nut, form RDA |
ISO 8434-3 RDB | Reducers without nut, form RDB |
ISO 8434-3 WDNP | Weld-on nipples, form WDNP |
ISO 8434-3 PL | Plugs, form PL |
ISO 8434-3 NA | Standard tube nuts, form NA |
ISO 8434-3 NB | High-strength tube nuts, form NB |
ISO 8434-3 CP | Caps, form CP |
ISO 8434-4 SWSDS-OR | EGE-unions, Screwed unions width O-Ring, form SWSDS, type OR |
ISO 8434-4 SWSDS-ED | EGE-unions, Screwed unions width elastomer seal, form SWSDS, type E |
ISO 8434-4 Ring | O-rings |
ISO 8434-4 WDRE | RED-NippIes, Welding nipples-reducing nipples, form WDRE |
ISO 8434-4 RESWS | RED-unions, Reducing unions, straight adjustable, form RESWS |
ISO 8434-4 RESWSC | RED-connections, Reducing connections, straight adjustable, form RESWSC |
ISO 8434-4 NP | Welding nipples width O-RING |
ISO 8434-4 SWBT | ET-unions, direction adjustable outflow, form SWBT |
ISO 8434-4 SWBTC | ET-connenctions, direction adjustable outflow, Form SWBTC |
ISO 8434-4 SWRT | EL-unions, direction adjustable pass, Form SWRT |
ISO 8434-4 SWRTC | EL-connenctions, direction adjustable pass, Form SWRTC |
ISO 8434-4 SWE | EW-unions, elbow unions direction adjustable, form SWE |
ISO 8434-4 SWEC | EW-connenctions, Elbow unions direction adjustable, form SWEC |
ISO 8434-6 BRS | Braze-on straight connectors, form BRS |
ISO 8434-6 BRNP-A | Braze-on nipples, form BRNP, with O-ring |
ISO 8434-6 BRNP-B | Braze-on nipples, form BRNP, without O-ring |
ISO 8434-6 S | Straight connectors, form S |
ISO 8434-6 SWS-A | Straight swivel connectors, form SWS, with O-ring |
ISO 8434-6 SWS-B | Straight swivel connectors, form SWS, without O-ring |
ISO 8434-6 SWSDS-A | Straight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, with O-ring |
ISO 8434-6 SWSDB-B | Straight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, without O-ring |
ISO 8434-6 SWSDS-E-A | Straight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, with O-ring |
ISO 8434-6 SWSDS-E-B | Straight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, without O-ring |
ISO 8434-6 SWSDS-G-A | Straight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, with O-ring |
ISO 8434-6 SWSDS-G-B | Straight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, without O-ring |
ISO 8434-6 SDS | Straight stud connectors with ISO 6149-3 stud end, form SDS |
ISO 8434-6 SDS-E | Straight stud connectors with ISO 1179-2 type E stud end (L series), form SDS |
ISO 8434-6 SDS-G | Straight stud connectors with ISO 1179-3 type G stud end, form SDS |
ISO 8434-6 E | 90° elbow connectors, form E |
ISO 8434-6 E45 | 45° elbow connectors, form E45 |
ISO 8434-6 SWE-A | 90° swivel elbow connectors, form SWE, with O-ring |
ISO 8434-6 SWE-B | 90° swivel elbow connectors, form SWE, without O-ring |
ISO 8434-6 SWE45-A | 45° swivel elbow connectors, form SWE45, with O-ring |
ISO 8434-6 SWE45-B | 45° swivel elbow connectors, form SWE45, without O-ring |
ISO 8434-6 SWSDE-A | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, with O-ring |
ISO 8434-6 SWSDE-B | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, without O-ring |
ISO 8434-6 SWSDE45-A | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, with O-ring |
ISO 8434-6 SWSDE45-B | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, without O-ring |
ISO 8434-6 SWSDE-H-A | 90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, with O-ring |
ISO 8434-6 SWSDE-H-B | 90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, without O-ring |
ISO 8434-6 SWSDE45-H-A | 45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, with O-ring |
ISO 8434-6 SWSDE45-H-B | 45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, without O-ring |
ISO 8434-6 SDE | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE |
ISO 8434-6 SDE45 | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE45 |
ISO 8434-6 SDE-H | 90° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE |
ISO 8434-6 SDE45-H | 45° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE45 |
ISO 8434-6 T | Male tee connectors, form T |
ISO 8434-6 SWBT-A | Swivel branch tee connectors, form SWBT, with O-ring |
ISO 8434-6 SWBT-B | Swivel branch tee connectors, form SWBT, without O-ring |
ISO 8434-6 SWRT-A | Swivel run tee connectors, form SWRT, with O-ring |
ISO 8434-6 SWRT-B | Swivel run tee connectors, form SWRT, without O-ring |
ISO 8434-6 BHS | Straight bulkhead connectors, form BHS |
ISO 8434-6 BHE | 90° bulkhead elbow connectors, form BHE |
ISO 8434-6 WDNP-1-A | Weld-on nipples, form WDNP, type 1, with O-ring |
ISO 8434-6 WDNP-1-B | Weld-on nipples, form WDNP, type 1, without O-ring |
ISO 8434-6 WDNP-2-A | Weld-on nipples, form WDNP, type 2, with O-ring |
ISO 8434-6 WDNP-2-B | Weld-on nipples, form WDNP, type 2, without O-ring |
ISO 8434-6 N | Loose style nuts for weld-on nipples, form N |
ISO 8434-6 LN | Locknuts, form LN |
ISO 8434-6 Ring | O-rings |
ISO 12151-1 S | Male hose fittings, straight, form S |
ISO 12151-1 SWSA | Female swivel hose fittings, straight, form SWSA |
ISO 12151-1 SWSB | Female swivel hose fittings, straight, form SWSB |
ISO 12151-1 SWE45S | Female swivel hose fittings, 45° elbow, form SWE45S |
ISO 12151-1 SWE45M | Female swivel hose fittings, 45° elbow, form SWE45M |
ISO 12151-1 SWES | Female swivel hose fittings, 90° elbow, form SWES |
ISO 12151-1 SWEM | Female swivel hose fittings, 90° elbow, form SWEM |
ISO 12151-1 SWEL | Female swivel hose fittings, 90° elbow, form SWEL |
ISO 12151-2 SWS | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight fitting with swivel nut, form SWS |
ISO 12151-2 SWE45 | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 45°-elbow fitting with swivel nut, form SWE45 |
ISO 12151-2 SWE | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 90°-elbow fitting with swivel nut, form SWE |
ISO 12151-2 S | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight threaded stud, form S |
ISO 12151-3 S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, straight hose fitting, form S |
ISO 12151-3 E45S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, short, form E45S |
ISO 12151-3 E45M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, medium, form E45M |
ISO 12151-3 ES | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, short, form ES |
ISO 12151-3 EM | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, medium, form EM |
ISO 12151-3 E22M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 22.5°-flange curve fitting, medium, form E22M |
ISO 12151-3 E30S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, short, form E30S |
ISO 12151-3 E30M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, medium, form E30M |
ISO 12151-3 E60S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, short, form E60S |
ISO 12151-3 E60M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, medium, form E60M |
ISO 12151-3 E67S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, short, form E67S |
ISO 12151-3 E67M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, medium, form E67M |
ISO 1179-2 | Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
ISO 9974-2 | Einschraubzapfen mit Elastomerdichtung (Typ E), leichte Reihe (L-Reihe)_x000D_ und schwere Reihe (S-Reihe) |
ISO 1179-3 | Non-directional screw-in studs of the light series (L) according to ISO 1179-3 - Form G |
ISO 1179-3 | Richtungseinstellbarer Einschraubzapfen_x000D_ der leichten Reihe (L) nach ISO 1179-3 — Form H |
ISO 1179-4 | Stud ends for general use only with metal-to-metal sealing (type B) |
ISO 9974-3 | Stud ends with metal-to-metal sealing (type B) |
ISO 1179-2 | Elastomeric seals for use with ISO 1179-2 heavy-duty (S series) |
ISO 1179-3 | O-rings for screw-in pins of the light series (L) according to ISO 1179-3 |
ISO 1179-3 | Support rings for screw-in lugs of the light series (L) according to ISO 1179-3 |
ISO 9974-2 | Elastomer seals for use with studs, light series (L series) |
ISO 15482 H | Cross recessed countersunk head drilling screws with tapping, form H |
ISO 15482 Z | Cross recessed countersunk head drilling screws with tapping, form Z |
ISO 1479 C | Hexagon head tapping screws, form C |
ISO 1479 F | Hexagon head tapping screws, form F |
ISO 1479 R | Hexagon head tapping screws, form R |
ISO 1481 C | Slotted pan head tapping screws, form C |
ISO 1481 F | Slotted pan head tapping screws, form F |
ISO 1482 C | Slotted countersunk flat head tapping screws, form C |
ISO 1482 F | Slotted countersunk flat head tapping screws, form F |
ISO 1483 C | Slotted raised countersunk oval head tapping screws, form C |
ISO 1483 F | Slotted raised countersunk oval head tapping screws, form F |
ISO 7049 C-H | Cross recessed pan head tapping screws, form c-H |
ISO 7049 C-Z | Cross recessed pan head tapping screws, form C-Z |
ISO 7049 F-H | Cross recessed pan head tapping screws, form F-H |
ISO 7049 F-Z | Cross recessed pan head tapping screws, form F-Z |
ISO 7049 R-H | Cross recessed pan head tapping screws, form R-H |
ISO 7049 R-Z | Cross recessed pan head tapping screws, form R-Z |
ISO 7050 C-H | Cross recessed countersunk flat head tapping screws, form C-H |
ISO 7050 C-Z | Cross recessed countersunk flat head tapping screws, form C-Z |
ISO 7050 F-H | Cross recessed countersunk flat head tapping screws, form F-H |
ISO 7050 F-Z | Cross recessed countersunk flat head tapping screws, form F-Z |
ISO 7050 R-H | Cross recessed countersunk flat head tapping screws |
ISO 7050 R-Z | Cross recessed countersunk flat head tapping screws |
ISO 7051 C-H | Cross recessed raised countersunk oval head tapping screws, form C-H |
ISO 7051 C-Z | Cross recessed raised countersunk oval head tapping screws, form C-Z |
ISO 7051 F-H | Cross recessed raised countersunk oval head tapping screws, form F-H |
ISO 7051 F-Z | Cross recessed raised countersunk oval head tapping screws, form F-Z |
ISO 7051 R-H | Cross recessed raised countersunk oval head tapping screws, form R-H |
ISO 7051 R-Z | Cross recessed raised countersunk oval head tapping screws, form R-Z |
ISO 15480 | Hexagon washer head drilling screws with tapping screw thread |
ISO 15481 H | Cross recessed pan head drilling screws, form H |
ISO 15481 Z | Cross recessed pan head drilling screws, form Z |
ISO 15483 H | Cross recessed raised countersunk head drilling screws with tapping screw thread, form H |
ISO 15483 Z | Cross recessed raised countersunk head drilling screws with tapping screw thread, form Z |
ISO 7053 C | Hexagon washer head tapping screws with collar, form C |
ISO 7053 F | Hexagon washer head tapping screws with collar, form F |
ISO 7053 R | Hexagon washer head tapping screws with collar, form R |
ISO 4766 | Slotted set screws with flat point |
ISO 7434 | Slottet set screws with cone point |
ISO 7435 | Slotted set screws with long dog point |
ISO 7436 | Slotted set screws with cup point |
ISO 2342 | Slotted headless screws with shank |
ISO 4026 | Hexagon socket set screws with flat point |
ISO 4027 | Hexagon socket set screws with cone point |
ISO 4028 | Hexagon socket set screws with dog point |
ISO 4029 | Hexagon socket set screws with cup point |
ISO 10644 S1 | Screws and washer assemblies with plain washers. Hexagon sheet metal screws with thread to head |
ISO 10644 S2 | Screws and washer assemblies with plain washers. Head cap bolts with shank |
ISO 10644 S3 | Screws and washer assemblies with plain washers |
ISO 10644 S4 | Screws and washer assemblies with plain washers. Head cap bolts with inside hexagonal |
ISO 10644 S5 | Screws and washer assemblies with plain washers |
ISO 10644 S6 | Screws and washer assemblies with plain washers. Head cap bolts with slot |
ISO 10644 S10 | Screws and washer assemblies with plain washers |
ISO 10644 S11 | Screws and washer assemblies with plain washers |
ISO 10644 S12 | Screws and washer assemblies with plain washers |
ISO 10644 S13 | Screws and washer assemblies with plain washers |
ISO 10510 C-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 C, short sign S1 |
ISO 10510 F-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 F, short sign S1 |
ISO 10510 R-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 R, short sign S1 |
ISO 10510 C-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 C-H, short sign S2 |
ISO 10510 F-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 F-H, short sign S2 |
ISO 10510 R-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 R-H, short sign S2 |
ISO 10510 C-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 C-Z, short sign S2 |
ISO 10510 F-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 F-Z, short sign S2 |
ISO 10510 R-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 R-Z, short sign S2 |
ISO 10510 C-S3 | Tapping screw and washer assemblies with plain washers, ISO 1481 C, short sign S3 |
ISO 10510 F-S3 | Tapping screw and washer assemblies with plain washers, ISO 1481 F, short sign S3 |
ISO 4017 | Hexagon bolts with thread to the head |
ISO 4014 | Hexagon head bolts with shank, product groups A and B |
ISO 4018 | Hexagon head screws with thread until head |
ISO 8676 | Hexagon bolts with thread to the head, metric fine thread |
ISO 8765 | Hexagon head bolts with shank, metric fine thread |
ISO 4016 | Hexagon head bolts with shank |
ISO 15071 | Hexagon bolts with flange, small series |
ISO 15072 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
ISO 4015 | Hexagon head bolts, reduced shank |
ISO 4162 | Hexagon bolts with flange, small series |
ISO 7046-1 H | Countersunk flat head screws (common head style) with type H cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
ISO 2009 | Slotted countersunk flat head screws, product grade A |
ISO 2010 | Slotted raised countersunk head screws (common head style) – product grade A |
ISO 7046-1 Z | Countersunk flat head screws (common head style) with type Z cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
ISO 7046-2 H1 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
ISO 7046-2 H2 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
ISO 7046-2 Z1 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
ISO 7046-2 Z2 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
ISO 7047 H | Slotted raised countersunk raised head screws (common head style) with type H cross recess, product grade A |
ISO 7047 Z | Slotted raised countersunk raised head screws (common head style) with type Z cross recess, product grade A |
ISO 10642 | Hexagon socket countersunk head screws with reduced loadability |
ISO 7380-1 | Button head screws - Part 1: Hexagon socket button head screws |
ISO 3266 | Eye bolts |
ISO 7379 | Hexagon socket head shoulder screw |
ISO 7380-2 | Button head screws - Part 2: Hexagon socket button head screws with collar |
ISO 8678 | Cup head square neck bolts with small head and short neck |
ISO 14580 | Hexalobular socket cheese head screws, low head |
ISO 14583 | Hexalobular socket pan head screws |
ISO 14579 | Hexalobular socket head cap screws |
ISO 14584 | Hexalobular socket raised countersunk head screws |
ISO 14581 | Counter sunk screws with torx |
ISO 14582 | Hexalobular socket countersunk head screws, high head |
ISO 14585 C | Hexalobular socket pan head tapping screws |
ISO 14585 F | Hexalobular socket pan head tapping screws |
ISO 14585 R | Hexalobular socket pan head tapping screws |
ISO 14586 C | Hexalobular socket countersunk head tapping screws |
ISO 14586 F | Hexalobular socket countersunk head tapping screws |
ISO 14586 R | Hexalobular socket countersunk head tapping screws |
ISO 14587 C | Hexalobular socket raised countersunk (oval) head tapping screws |
ISO 14587 F | Hexalobular socket raised countersunk (oval) head tapping screws |
ISO 14587 R | Hexalobular socket raised countersunk (oval) head tapping screws |
ISO 4762 | Hexagon socket head cap screws |
ISO 1207 | Slotted cheese head screws, product grade A |
ISO 1580 | Slotted pan head screws, product grade A |
ISO 7045 H | Pan head screws with cross recess, form H – product grade A |
ISO 7045 Z | Pan head screws with cross recess, form Z – product grade A |
ISO 7048 H | Cross recessed cheese head screws, form H |
ISO 7048 Z | Cross recessed cheese head screws, form Z |
ISO 21269 | Hexalobular socket head cap screws with fine pitch thread |
ISO 12474 | Hexalobular socket head cap screws with fine pitch thread |
ISO 10242-2 C | Punch holder shanks, form C |
ISO 9183-1 A | Wear plates for press dies, type A |
ISO 8740 | Cylindrical grooved pins with chamfer |
ISO 8745 | Grooved pins, half length taper grooved |
ISO 8739 | Grooved pins, full-length parallel growed, with pilot |
ISO 8741 | Grooved pins, half length reverse grooved |
ISO 8742 | Grooved pins, 1/3 growed, with pilot |
ISO 8744 | Grooved pins, full-lenght parallel growed |
ISO 8746 A | Grooved pins with round head, form A |
ISO 8746 B | Grooved pins with round head, form B |
ISO 8743 | Grooved pins - Half-length centre grooved |
ISO 8747 A | Grooved pins with countersunk head, form A |
ISO 8747 B | Grooved pins with countersunk head, form B |
ISO 15973 | Closed end blind rivets with break pull mandrel and protruding head AIA/St |
ISO 15974 | Closed end blind rivets with break pull mandrel and countersunk head AIA/St |
ISO 15975 | Closed end blind rivets with break pull mandrel and protruding head AI/AIA |
ISO 15976 | Closed end blind rivets with break pull mandrel and protruding head St/St |
ISO 15977 | Open end blind rivets with break pull mandrel and protruding head AIA/St |
ISO 15978 | Open end blind rivets with break pull mandrel and countersunk head AIA/St |
ISO 15979 | Open end blind rivets with break pull mandrel and protruding head St/St |
ISO 15980 | Open end blind rivets with break pull mandrel and countersunk head St/St |
ISO 15981 | Open end blind rivets with break pull mandrel and protruding head AIA/AIA |
ISO 15982 | Open end blind rivets with break pull mandrel and countersunk head AIA/AIA |
ISO 15983 | Open end blind rivets with break pull mandrel and protruding head A2/A2 |
ISO 15984 | Open end blind rivets with break pull mandrel and countersunk head A2/A2 |
ISO 16582 | Open end blind rivets with break pull mandrel and protruding head. Cu/St, Cu/Br or Cu/SSt |
ISO 16583 | Open end blind rivets with break pull mandrel and countersunk head Cu/St or Cu/Br or Cu/SSt |
ISO 16584 | Open end blind rivets with break pull mandrel and protruding head NiCu/St or NiCu/SSt |
ISO 16585 | Closed end blind rivets with break pull mandrel and protruding head A2/SSt |
ISO 2338 | Parallel pins from unhardened steel and stainless steel |
ISO 8734 | Parallel pins of hardened steel and martensitic stainless steel |
ISO 8735 A | Parallel pins with internal thread, hardened, form A |
ISO 8735 B | Parallel pins with internal thread, hardened, form B |
ISO 8733 | Parallel pins, with internal thread |
ISO 8737 | Taper pins with threaded pin |
ISO 2339 A | Taper pins, not hardened, form A |
ISO 2339 B | Taper pins, unhardened, form B |
ISO 8736 A | Taper pins with inner thread, no hardened, form A |
ISO 8736 B | Taper pins with inner thread, unhardened, form B |
ISO 8752 | Clamping pins - slotted, heavy duty |
ISO 13337 | Spring-type straight pins, slotted, light duty |
ISO 8748 | Spring-type straight pins - Coiled, heavy duty |
ISO 8750 | Spring-type straight pins - Coiled, standard duty |
ISO 8751 | Spring-type straight pins - Coiled, light duty |
ISO 1234 | Split pins |
ISO 2340 A | Clevis pins without head, form A |
ISO 2340 B | Clevis pins without head, form B |
ISO 2341 A | Clevis pins with head, form A |
ISO 2341 B | Clevis pins with head, form B |
ISO 3601-4 T1 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T1 |
ISO 3601-4 T2 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T2 |
ISO 3601-4 T3 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T3 |
ISO 3601-4 T4 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T4 |
ISO 3601-4 T5 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T5 |
ISO 6194-1 Type 1 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased |
ISO 6194-1 Type 1S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased. Single lip with protection lip |
ISO 6194-1 Type 2 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case |
ISO 6194-1 Type 2S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case. Single lip with protection lip |
ISO 6194-1 Type 3 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 3. Semi-rubber-covered metal-cased |
ISO 6194-1 Type 3S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Semi-rubber-covered metal-cased. Single lip with protection lip |
ISO 6194-1 Type 4 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased |
ISO 6194-1 Type 4S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased. Single lip with protection lip |
ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, middle series |
ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, light series |
ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, middle series |
ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, light series |
ISO 3912 | Woodruff keys and keyways |
ISO 4247 | Press-fitt bushes - Headed type |
ISO 4247 | Press-fitt bushes - Headless type |
ISO 4247 | Press-fitt liners - Headed type |
ISO 4247 | Press-fitt liners - Headless type |
ISO 4247 | Locking screws |
ISO 4247 | Renewable bushes - Fixed type with or without bore for stop pin |
ISO 4247 | Renewable bushes - Slip type with or without bore for stop pin |
ISO 4247 | Jig bushes and accessories for drilling purposes |
ISO 4247 | ISO 4247: Jig bushes and accessories for drilling purposes" |
ISO 5468 | Rotary and rotary impact masonry drill bits with hardmetal tips |
ISO 238 INCH | Extension sockets for tools with Morse taper shanks |
ISO 238 | Extension sockets for tools with Morse taper shanks |
ISO 238 INCH | Reduction sleeves for tools with Morse taper shanks |
ISO 238 | Reduction sleeves for tools with Morse taper shanks |
ISO 10102 | Double-headed open-ended engineers' wrenches |
ISO 2725-1 A | Hand-operated sockets, form A |
ISO 2725-1 B | Hand-operated sockets, form B |
ISO 2725-2 | Machine-operated sockets ("impact"), rings |
ISO 2725-2 | Machine-operated sockets ("impact"), retaining pins |
ISO 2725-2 | Machine-operated sockets ("impact") |
ISO 2725-3 | Machine-operated sockets ("non-impact"), rings |
ISO 2725-3 | Machine-operated sockets ("non-impact"), retaining pin |
ISO 2725-3 G | Machine-operated sockets ("non-impact"), form G |
ISO 2725-3 J | Machine-operated sockets ("non-impact"), form J |
ISO 2936 | Hexagon socket screw key |
ISO 4231 | Hand and machine-operated circular screwing dies for parallel pipe threads, G series |
ISO 6751 | Knockout pin with cylindricity |
ISO 6787 A | Adjustable wrenches, open end, form A |
ISO 6787 B | Adjustable wrenches, open end, form B |
ISO 7738 A | Combination wrenches, form A |
ISO 7738 B | Combination wrenches, form B |
ISO 10889-1 | Tool holders with parallel shank |
ISO 10889-2 A1 | Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, right angular |
ISO 10889-2 A2 | Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, round |
ISO 10889-3 B1 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B1 right, short |
ISO 10889-3 B2 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B2 left, short |
ISO 10889-3 B3 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, right, short |
ISO 10889-3 B4 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, left, short |
ISO 10889-3 B5 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B5 right, long |
ISO 10889-3 B6 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 left, long |
ISO 10889-3 B7 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B7 overhead, right, long |
ISO 10889-3 B8 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 overhead, left, long |
ISO 10889-4 C1 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C1, right |
ISO 10889-4 C2 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C2, left |
ISO 10889-4 C3 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C3, overhead, right |
ISO 10889-4 C4 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C4, overhead, left |
ISO 10889-5 D1 | Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D1 |
ISO 10889-5 D2 | Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D2 |
ISO 10889-6 E1 | Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E1 for drilling tools with internal coolant feed |
ISO 10889-6 E2 | Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E2 for turning tools with cylindrical |
ISO 10889-8 Z1 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z1, clamping rings |
ISO 10889-8 Z2 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z2, blanking plugs |
ISO 10889-8 Z3 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z3, ball nozzles |
ISO 13918 FD | Studs and ceramic ferrules for arc stud welding, form FD |
ISO 13918 MD | Studs with reduce shaft for arc welding, form MD |
ISO 13918 PD | Studs for arc welding, form PD |
ISO 13918 RD | Studs with reduce shaft for arc welding, form RD |
ISO 13918 UD | Studs for arc stud welding, form UD |
ISO 13918 ND | Insulation pins/nails, form ND |
ISO 13918 ID | Studs with internal thread for arc stud welding, form ID |
ISO 13918 SD1 | Shear connectors for arc welding, form SD1 |
ISO 13918 SD2 | Shear connectors for arc welding, form SD2 |
ISO 13918 SD3 | Shear connectors for arc welding, form SD3 |
ISO 13918 PS | Studs and ceramic ferrules for arc stud welding, form PS |
ISO 13918 US | Studs for arc stud welding, form US |
ISO 13918 IS | Studs with internal thread for arc stud welding, form IS |
ISO 13918 PT | Studs for arc welding, form PT |
ISO 13918 UT | Studs for arc stud welding, form UT |
ISO 13918 IT | Studs with internal thread for arc stud welding, form IT |
ISO 13918 UF | Ceramic rings for pins and head bolts, form UF |
ISO 13918 MF | Ceramic rings for pins and head bolts, form MF |
ISO 13918 PF | Ceramic rings for stud bolts, form PF |
ISO 13918 RF | Ceramic rings for studs with reduced shank, form RF |
ISO 13918 DF | Ceramic rings for studs with reduced shank, form DF |
ISO 8139 | Rod end spherical eyes |
ISO 8140 | Rod end clevises |
IS0 487 S | Steel roller chains, type S |
ISO 487 C | Steel roller chains, type C |
ISO 487 C F1 | Steel roller chains, type C, F1 attachment plates |
ISO 487 C F4 | Steel roller chains, type C, F4 attachment plates |
ISO 487 S F4 | Steel roller chains, type S, F4 attachment plates |
ISO 487 S K1 | Steel roller chains, type S, K1 attachment plates |
ISO 487 C K1 | Steel roller chains, type C, K1 attachment plates |
ISO 487 S M1 | Steel roller chains, type S, M1 attachment plates |
ISO 487 | Chain wheels for steel roller chains type S and C |
ISO 606 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
ISO 3601-1 | O-rings |
ISO 3601-2 | O-rings - Housings |
ISO 3601-3 | O-Rings |
ISO 10673 L | Plain washers for screw and washer assemblies, form L |
ISO 10673 N | Plain washers for screw and washer assemblies, form N |
ISO 10673 S | Plain washers for screw and washer assemblies, form S |
ISO 7089 | Plain washers, normal series, product grade A |
ISO 7092 | Plain washers, small series, product grade A |
ISO 7090 | Plain washers, chamfered, normal series, product grade A |
ISO 7091 | Plain washers, normal series, product grade C |
ISO 7093-1 | Plain washers, large series, product grade A |
ISO 7093-2 | Plain washers, large series, product grade C |
ISO 7094 | Plain washers, extra large series, product grade C |
ISO 10669 L | Plain washers for tapping screw and washer assemblies, form L |
ISO 10669 N | Plain washers for tapping screw and washer assemblies, form N |
ISO 8738 | Washers for studs, finish coarse |
ISO 887 | Plain washers for metric bolts, screws and nuts for general purposes |
ISO 7010 E001 | Safe combination signs, emergency exit (left hand), form E001 |
ISO 7010 E002 | Safe combination signs, emergency exit (right hand), form E002 |
ISO 7010 E003 | Safe combination signs, first aid, form E003 |
ISO 7010 E004 | Safe combination signs, emergency telephone, form E004 |
ISO 7010 E005 | Safe combination signs, direction, arrow (90° increments), safe condition, form E005 |
ISO 7010 E006 | Safe combination signs, direction, 45° arrow (90° increments), safe condition, form E006 |
ISO 7010 E007 | Safe combination signs, evacuation assembly point, form E007 |
ISO 7010 E008 | Safe combination signs, break obtain access, form E008 |
ISO 7010 E009 | Safe combination signs, doctor, form E009 |
ISO 7010 E010 | Safe combination signs, automated external defibrillator (AED), form E010 |
ISO 7010 E011 | Safe combination signs, eyewash station, form E011 |
ISO 7010 E012 | Safe combination signs, safety shower, form E012 |
ISO 7010 E013 | Safe combination signs, stretcher, form E013 |
ISO 7010 E014 | Sicherheitskennzeichnung,Erkennungssystem für das_x000D_ Vorhandensein und die Orientierung_x000D_ eines Kindersitzes (en: CPOD), Form E014 |
ISO 7010 E015 | Safe combination signs, drinking water, form E015 |
ISO 7010 E016 | Safe combination signs, emergency exit with escape ladder, form E016 |
ISO 7010 E017 | Safe combination signs, rescue window, form E017 |
ISO 7010 E018 | Safe combination signs, turn anticlockwise to open, form E018 |
ISO 7010 E019 | Safe combination signs, turn clockwise to open, form E019 |
ISO 7010 E020 | Safe combination signs, emergency stop button, form E020 |
ISO 7010 E021 | Safe combination signs, protection shelter, form E021 |
ISO 7010 E022 | Safe combination signs, door opens by pushing on the left-hand side, form E022 |
ISO 7010 E023 | Safe combination signs, door opens by pushing on the right-hand side, form E023 |
ISO 7010 E024 | Safe combination signs, evacuation temporary refuge, form E024 |
ISO 7010 E025 | Safe combination signs, emergency hammer, form E025 |
ISO 7010 E026 | Safe combination signs, emergency exit for people unable to walk or with walking impairment (left), form E026 |
ISO 7010 E027 | Safe combination signs, medical grab bag, form E027 |
ISO 7010 E028 | Safe combination signs, oxygen resuscitator, form E028 |
ISO 7010 E029 | Safe combination signs, emergency escape breathing device, form E029 |
ISO 7010 E030 | Safe combination signs, emergency exit for people unable to walk or with walking impairment (right), form E030 |
ISO 7010 E031 | Safe combination signs, shipboard general alarm, form E031 |
ISO 7010 E032 | Safe combination signs, shipboard assembly station, form E032 |
ISO 7010 E033 | Safe combination signs, door slides right to open, form E033 |
ISO 7010 E034 | Safe combination signs, door slides left to open, form E034 |
ISO 7010 E035 | Safe combination signs, liferaft knife, form E035 |
ISO 7010 E036 | Safe combination signs, lifeboat, form E036 |
ISO 7010 E037 | Safe combination signs, rescue boat, form E037 |
ISO 7010 E038 | Safe combination signs, liferaft, form E038 |
ISO 7010 E039 | Safe combination signs, Davit-launched liferaft, form E039 |
ISO 7010 E040 | Safe combination signs, lifebuoy, form E040 |
ISO 7010 E041 | Safe combination signs, lifebuoy with line, form E041 |
ISO 7010 E042 | Safe combination signs, lifebuoy with light, form E042 |
ISO 7010 E043 | Safe combination signs, lifebuoy with line and light, form E043 |
ISO 7010 E044 | Safe combination signs, lifejacket, form E044 |
ISO 7010 E045 | Safe combination signs, child's lifejacket, form E045 |
ISO 7010 E046 | Safe combination signs, Infant's lifejacket, form E046 |
ISO 7010 E047 | Safe combination signs, search and rescue transponder, form E047 |
ISO 7010 E048 | Safe combination signs, survival craft distress signal, form E048 |
ISO 7010 E049 | Safe combination signs, rocket parachute flare, form E049 |
ISO 7010 E050 | Safe combination signs, line-throwing appliance, form E050 |
ISO 7010 E051 | Sicherheitskennzeichnung, UKW-Sprechfunkgerät_x000D_ (Senden/Empfangen), tragbar, Form E051 |
ISO 7010 E052 | Safe combination signs, emergency position indicating radio beacon, form E052 |
ISO 7010 E053 | Safe combination signs, embarkation ladder, form E053 |
ISO 7010 E054 | Safe combination signs, marine evacuation slide, form E054 |
ISO 7010 E055 | Safe combination signs, marine evacuation chute, form E055 |
ISO 7010 E056 | Safe combination signs, survival clothing, form E056 |
ISO 7010 E057 | Safe combination signs, door opens by pulling on the left‑hand side, form E057 |
ISO 7010 E058 | Safe combination signs, door opens by pulling on the right‑hand side, form E058 |
ISO 7010 E059 | Safe combination signs, escape ladder, form E059 |
ISO 7010 E060 | Safe combination signs, evacuation chair, form E060 |
ISO 7010 E061 | Safe combination signs, water life-saving equipment, form E061 |
ISO 7010 E062 | Safe combination signs, tsunami evacuation area, form E062 |
ISO 7010 E063 | Safe combination signs, tsunami evacuation building, form E063 |
ISO 7010 F001 | Fire equipment signs, fire extinguisher, form F001 |
ISO 7010 F002 | Fire equipment signs, fire hose reel, form F002 |
ISO 7010 F003 | Fire equipment signs, fire ladder, form F003 |
ISO 7010 F004 | Fire equipment signs, collection of firefighting equipment, form F004 |
ISO 7010 F005 | Fire equipment signs, fire alarm call point, form F005 |
ISO 7010 F006 | Fire equipment signs, fire emergency telephone, form F006 |
ISO 7010 F007 | Fire equipment signs, fire protection door, form F007 |
ISO 7010 F008 | Fire equipment signs, fixed fire extinguishing battery, form F008 |
ISO 7010 F009 | Fire equipment signs, wheeled fire extinguisher, form F009 |
ISO 7010 F010 | Fire equipment signs, portable foam applicator unit, form F010 |
ISO 7010 F011 | Fire equipment signs, water fog applicator, form F011 |
ISO 7010 F012 | Fire equipment signs, fixed fire extinguishing installation, form F012 |
ISO 7010 F013 | Fire equipment signs, fixed fire extinguishing bottle, form F013 |
ISO 7010 F014 | Fire equipment signs, remote release station, form F014 |
ISO 7010 F015 | Fire equipment signs, fire monitor, form F015 |
ISO 7010 F016 | Fire equipment signs, fire blanket, form F016 |
ISO 7010 M001 | Mandatory action signs, general mandatory action sign, form M001 |
ISO 7010 M002 | Mandatory action signs, refer to instruction manual/booklet, form M002 |
ISO 7010 M003 | Mandatory action signs, wear ear protection, form M003 |
ISO 7010 M004 | Mandatory action signs, wear eye protection, form M004 |
ISO 7010 M005 | Mandatory action signs, connect an earth terminal to the ground, form M005 |
ISO 7010 M006 | Mandatory action signs, disconnect mains plug from electrical outlet, form M006 |
ISO 7010 M007 | Mandatory action signs, opaque eye protection must be worn, form M007 |
ISO 7010 M008 | Mandatory action signs, wear safety footwear, form M008 |
ISO 7010 M009 | Mandatory action signs, wear protective gloves, form M009 |
ISO 7010 M00X | Mandatory action signs, lift point, form M00X |
ISO 7010 M010 | Mandatory action signs, wear protective clothing, form M010 |
ISO 7010 M011 | Mandatory action signs, wash your hands, form M011 |
ISO 7010 M012 | Mandatory action signs, use handrail, form M012 |
ISO 7010 M013 | Mandatory action signs, wear a face shield, form M013 |
ISO 7010 M014 | Mandatory action signs, wear head protection, form M014 |
ISO 7010 M015 | Mandatory action signs, wear high-visibility clothing, form M015 |
ISO 7010 M016 | Mandatory action signs, wear a mask, form M016 |
ISO 7010 M017 | Mandatory action signs, wear respiratory protection, form M017 |
ISO 7010 M018 | Mandatory action signs, wear a safety harness, form M018 |
ISO 7010 M019 | Mandatory action signs, wear a welding mask, form M019 |
ISO 7010 M020 | Mandatory action signs, wear safety belts, form M020 |
ISO 7010 M021 | Mandatory action signs, disconnect before carrying out maintenance or repair, form M021 |
ISO 7010 M022 | Mandatory action signs, use barrier cream, form M022 |
ISO 7010 M023 | Mandatory action signs, use footbridge, form M023 |
ISO 7010 M024 | Mandatory action signs, use this walkway, form M024 |
ISO 7010 M025 | Mandatory action signs, protect infant's eyes with opaque eye protection, form M025 |
ISO 7010 M026 | Mandatory action signs, use protective apron, form M026 |
ISO 7010 M027 | Mandatory action signs, check guard, form M027 |
ISO 7010 M028 | Mandatory action signs, keep locked, form M028 |
ISO 7010 M029 | Mandatory action signs, sound horn, form M029 |
ISO 7010 M030 | Mandatory action signs, use litter bin, form M030 |
ISO 7010 M031 | Mandatory action signs, use table saw adjustable guard, form M031 |
ISO 7010 M032 | Mandatory action signs, wear anti-static footwear, form M032 |
ISO 7010 M033 | Mandatory action signs, close safety bar of chairlift, form M033 |
ISO 7010 M034 | Mandatory action signs, open safety bar of chairlift, form M034 |
ISO 7010 M035 | Mandatory action signs, immediately leave the tow-track in the event of falling, form M035 |
ISO 7010 M036 | Mandatory action signs, lift ski tips, form M036 |
ISO 7010 M037 | Mandatory action signs, close and secure hatches in launch sequence, form M037 |
ISO 7010 M038 | Mandatory action signs, start engine in launch sequence, form M038 |
ISO 7010 M039 | Mandatory action signs, lower lifeboat to the water in launch sequence, form M039 |
ISO 7010 M040 | Mandatory action signs, lower liferaft to the water in launch sequence, form M040 |
ISO 7010 M041 | Mandatory action signs, lower rescue boat to the water in launch sequence, form M041 |
ISO 7010 M042 | Mandatory action signs, release falls in launch sequence, form M042 |
ISO 7010 M043 | Mandatory action signs, start water spray in launch sequence, form M043 |
ISO 7010 M044 | Mandatory action signs, start air supply in launch sequence, form M044 |
ISO 7010 M045 | Mandatory action signs, release lifeboat gripes in launch sequence, form M045 |
ISO 7010 M046 | Mandatory action signs, secure gas cylinders, form M046 |
ISO 7010 M047 | Mandatory action signs, use self-contained breathing appliance, form M047 |
ISO 7010 M048 | Mandatory action signs, use gas detector, form M048 |
ISO 7010 M049 | Mandatory action signs, wear protective roller sport equipment, form M049 |
ISO 7010 M050 | Mandatory action signs, alighting from toboggan to the left, form M050 |
ISO 7010 M051 | Mandatory action signs, alighting from toboggan to the right, form M051 |
ISO 7010 M052 | Mandatory action signs, keep distance between toboggans, form M052 |
ISO 7010 M053 | Mandatory action signs, wear personal flotation device, form M053 |
ISO 7010 M054 | Mandatory action signs, keep children under supervision in the aquatic environment, form M054 |
ISO 7010 P001 | Prohibition signs, general prohibition sign, form P001 |
ISO 7010 P002 | Prohibition signs, no smoking, form P002 |
ISO 7010 P003 | Prohibition signs, no open flame; Fire, open ignition source and smoking prohibited, form P003 |
ISO 7010 P004 | Prohibition signs, no thoroughfare, form P004 |
ISO 7010 P005 | Prohibition signs, not drinking water, form P005 |
ISO 7010 P006 | Prohibition signs, no access for forklift trucks and other industrial vehicles, form P006 |
ISO 7010 P007 | Prohibition signs, no access for people with active implanted cardiac devices, form P007 |
ISO 7010 P008 | Prohibition signs, no metallic articles or watches, form P008 |
ISO 7010 P009 | Prohibition signs, no climbing, form P009 |
ISO 7010 P010 | Prohibition signs, do not touch, form P010 |
ISO 7010 P011 | Prohibition signs, do not extinguish with water, form P011 |
ISO 7010 P012 | Prohibition signs, no heavy load, form P012 |
ISO 7010 P013 | Prohibition signs, no activated mobile phone, form P013 |
ISO 7010 P014 | Prohibition signs, no access for people with metallic implants, form P014 |
ISO 7010 P015 | Prohibition signs, no reaching in, form P015 |
ISO 7010 P016 | Prohibition signs, do not spray with water, form P016 |
ISO 7010 P017 | Prohibition signs, no pushing, form P017 |
ISO 7010 P018 | Prohibition signs, no sitting, form P018 |
ISO 7010 P019 | Prohibition signs, no stepping on surface, form P019 |
ISO 7010 P020 | Prohibition signs, do not use lift in the event of fire, form P020 |
ISO 7010 P021 | Prohibition signs, no dogs, form P021 |
ISO 7010 P022 | Prohibition signs, no eating or drinking, form P022 |
ISO 7010 P023 | Prohibition signs, do not obstruct, form P023 |
ISO 7010 P024 | Prohibition signs, do not walk or stand here, form P024 |
ISO 7010 P025 | Prohibition signs, do not use this incomplete scaffold, form P025 |
ISO 7010 P026 | Prohibition signs, do not use this device in a bathtub, shower or water-filled reservoir, form P026 |
ISO 7010 P027 | Prohibition signs, do not use this lift for people, form P027 |
ISO 7010 P028 | Prohibition signs, do not wear gloves, form P028 |
ISO 7010 P029 | Prohibition signs, no photography, form P029 |
ISO 7010 P030 | Prohibition signs, do not tie knots in rope, form P030 |
ISO 7010 P031 | Prohibition signs, do not alter the state of the switch, form P031 |
ISO 7010 P032 | Prohibition signs, do not use for face grinding, form P032 |
ISO 7010 P033 | Prohibition signs, do not use for wet grinding, form P033 |
ISO 7010 P034 | Prohibition signs, not for people in the state intoxication, form P043 |
ISO 7010 P035 | Prohibition signs, do not wear metal-studded footwear, form P035 |
ISO 7010 P036 | Prohibition signs, no children allowed, form P036 |
ISO 7010 P037 | Prohibition signs, do not leave the tow-track, form P037 |
ISO 7010 P038 | Prohibition signs, do not swing the chair, form P038 |
ISO 7010 P039 | Prohibition signs, hot works prohibited, form P039 |
ISO 7010 P040 | Prohibition signs, do not set off fireworks, form P040 |
ISO 7010 P041 | Prohibition signs, no leaning against, form P041 |
ISO 7010 P042 | Prohibition signs, for pregnant women forbidden, form P042 |
ISO 7010 P043 | Prohibition signs, not for people in the state intoxication, form P043 |
ISO 7010 P044 | Prohibition signs, use of smart glasses prohibited, form P044 |
ISO 7010 P045 | Prohibition signs, no campfires, form P045 |
ISO 7010 P046 | Prohibition signs, do not stretch out of toboggan, form P046 |
ISO 7010 P047 | Prohibition signs, do not ram into toboggans, form P047 |
ISO 7010 P048 | Prohibition signs, no running, form P048 |
ISO 7010 P049 | Prohibition signs, no swimming, form P049 |
ISO 7010 P050 | Prohibition signs, no snorkelling, form P050 |
ISO 7010 P051 | Prohibition signs, no sub-aque diving, form P051 |
ISO 7010 P052 | Prohibition signs, no diving, form P052 |
ISO 7010 P053 | Prohibition signs, no sailing, form P053 |
ISO 7010 P054 | Prohibition signs, no windsurfing, form P054 |
ISO 7010 P055 | Prohibition signs, no manually powered craft, form P055 |
ISO 7010 P056 | Prohibition signs, no mechanically powered craft, form P056 |
ISO 7010 P057 | Prohibition signs, no personal water craft, form P057 |
ISO 7010 P058 | Prohibition signs, no towed water activity, form P058 |
ISO 7010 P059 | Prohibition signs, no surf craft, form P059 |
ISO 7010 P060 | Prohibition signs, no outdoor footwear, form P060 |
ISO 7010 P061 | Prohibition signs, no jumping into water, form P061 |
ISO 7010 P062 | Prohibition signs, no pushing into water, form P062 |
ISO 7010 P063 | Prohibition signs, no body boarding, form P063 |
ISO 7010 P064 | Prohibition signs, no surfing between the red-and-yellow flags, form P064 |
ISO 7010 P065 | Prohibition signs, no kite surfing, form P065 |
ISO 7010 P066 | Prohibition signs, no parasailing, form P066 |
ISO 7010 P067 | Prohibition signs, no sand yachting, form P067 |
ISO 7010 P068 | Prohibition signs, do not expose to direct sunlight or hot surface, form P068 |
ISO 7010 P069 | Prohibition signs, not to be serviced by users, form P069 |
ISO 7010 P070 | Prohibition signs, do not put finger into the nozzle of a hydromassage, form P070 |
ISO 7010 P071 | Prohibition signs, do not exceed barrier, form P071 |
ISO 7010 P072 | Prohibition signs, no jumping down, form P072 |
ISO 7010 W001 | Warning signs, general warning sign, form W001 |
ISO 7010 W002 | Warning signs, warning; Explosive materials, form W002 |
ISO 7010 W003 | Warning signs, warning; Radioactive smaterial or ionizing radiation, form W003 |
ISO 7010 W004 | Warning signs, warning; Laser beam, form W004 |
ISO 7010 W005 | Warning signs, warning; Non-ionizing radiation, form W005 |
ISO 7010 W006 | Warning signs, warning; Magnetic field, form W006 |
ISO 7010 W007 | Warning signs, warning; Floor-level obstacle, form W007 |
ISO 7010 W008 | Warning signs, warning; Drop (fall), form W008 |
ISO 7010 W009 | Warning signs, warning; Biological hazard, form W009 |
ISO 7010 W010 | Warning signs, warning; Low temperature / freezing conditions, form W010 |
ISO 7010 W011 | Warning signs, warning; Slippery surface, form W011 |
ISO 7010 W012 | Warning signs, warning; Electricity, form W012 |
ISO 7010 W013 | Warning signs, warning; Guard dog, form W013 |
ISO 7010 W014 | Warning signs, warning; Forklift trucks and other industrial vehicles, form W014 |
ISO 7010 W015 | Warning signs, warning; Overhead load, form W015 |
ISO 7010 W016 | Warning signs, warning; Toxic material, form W016 |
ISO 7010 W017 | Warning signs, warning; Hot surface, form W017 |
ISO 7010 W018 | Warning signs, warning; Automatic start-up, form W018 |
ISO 7010 W019 | Warning signs, warning; Crushing, form W019 |
ISO 7010 W020 | Warning signs, warning; Overhead obstacle, form W020 |
ISO 7010 W021 | Warning signs, warning; Flammable material, form W021 |
ISO 7010 W022 | Warning signs, warning; Sharp element, form W022 |
ISO 7010 W023 | Warning signs, warning; Corrosive substance, form W023 |
ISO 7010 W024 | Warning signs, warning; Crushing of hands, form W024 |
ISO 7010 W025 | Warning signs, warning; Counterrotating rollers, form W025 |
ISO 7010 W026 | Warning signs, warning; Battery charging, form W026 |
ISO 7010 W027 | Warning signs, warning; Optical radiation, form W027 |
ISO 7010 W028 | Warning signs, warning; Oxidizing substance, form W028 |
ISO 7010 W029 | Warning signs, warning; Pressurized cylinder, form W029 |
ISO 7010 W030 | Warning signs, warning; Hand crushing between press brake tool, form W030 |
ISO 7010 W031 | Warning signs, warning; Hand crushing between press brake and material, form W031 |
ISO 7010 W032 | Warning signs, warning; Rapid movement of workpiece in press brake, form W032 |
ISO 7010 W033 | Warning signs, warning; Barbed wire, form W033 |
ISO 7010 W034 | Warning signs, warning; Bull, form W034 |
ISO 7010 W035 | Warning signs, warning; Falling objects, form W035 |
ISO 7010 W036 | Warning signs, warning; Fragile roof, form W036 |
ISO 7010 W037 | Warning signs, warning; Run over by remote operator-controlled machine, form W037 |
ISO 7010 W038 | Warning signs, warning; Sudden loud noise, form W038 |
ISO 7010 W039 | Warning signs, warning; Falling ice, form W039 |
ISO 7010 W040 | Warning signs, warning; Roof avalanche, form W040 |
ISO 7010 W041 | Warning signs, warning; Asphyxiating atmosphere, form W041 |
ISO 7010 W042 | Warning signs, warning; Arc flash, form W042 |
ISO 7010 W043 | Warning signs, warning; Thin ice, form W043 |
ISO 7010 W044 | Warning signs, warning; Slipway, form W044 |
ISO 7010 W045 | Warning signs, warning; Towed water activity area, form W045 |
ISO 7010 W046 | Warning signs, warning; Surf craft area, form W046 |
ISO 7010 W047 | Warning signs, warning; Deep water, form W047 |
ISO 7010 W048 | Warning signs, warning; Shallow water (diving), form W048 |
ISO 7010 W049 | Warning signs, warning; Submerged objects, form W049 |
ISO 7010 W050 | Warning signs, warning; Sudden drop in swimming or leisure pools, form W050 |
ISO 7010 W051 | Warning signs, warning; Unprotected edge, form W051 |
ISO 7010 W052 | Warning signs, warning; Unstable cliff edge, form W052 |
ISO 7010 W053 | Warning signs, warning; Unstable cliff, form W053 |
ISO 7010 W054 | Warning signs, warning; Shark, form W054 |
ISO 7010 W055 | Warning signs, warning; Sewage effluent outfall, form W055 |
ISO 7010 W056 | Warning signs, warning; Tsunami hazard zone, form W056 |
ISO 7010 W057 | Warning signs, warning; Strong currents, form W057 |
ISO 7010 W058 | Warning signs, warning; Boating area, form W058 |
ISO 7010 W059 | Warning signs, warning; Sand yachting, form W059 |
ISO 7010 W060 | Warning signs, warning; Incoming tides, form W060 |
ISO 7010 W061 | Warning signs, warning; Quicksand or mud/deep mud or silt, form W061 |
ISO 7010 W062 | Warning signs, warning; Kite surfing, form W062 |
ISO 7010 W063 | Warning signs, warning; Parasailing, form W063 |
ISO 7010 W064 | Warning signs, warning; Strong winds, form W064 |
ISO 7010 W065 | Warning signs, warning; High surf or large breaking waves, form W065 |
ISO 7010 W066 | Warning signs, warning; Deep shelving beach, form W066 |
ISO 7010 W067 | Warning signs, warning; Crocodiles, alligators or caymans, form W067 |
ISO 7010 W068 | Warning signs, warning of falling into water when entering or leaving a floating surface, form W068 |
ISO 7010 W069 | Warning signs, warning of jellyfish, form W069 |
ISO 7010 W070 | Warning signs, warning of stepping down, form W070 |
ISO 11684 A.2.1 | Safety signs and hazard pictorials; Caustic liquids - Chemical burns to fingers or hand, Form A.2.1 |
ISO 11684 A.2.2 | Safety signs and hazard pictorials; Pouisonous turnes or toxix gases - Asphyxiation, Form A.2.2 |
ISO 11684 A.3.1 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.1 |
ISO 11684 A.3.2 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.2 |
ISO 11684 A.3.3 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.3 |
ISO 11684 A.3.4 | Safety signs and hazard pictorials; Electrical shock/electrocution - Row marker, Form A.3.4 |
ISO 11684 A.3.5 | Safety signs and hazard pictorials; Electrical shock/electrocution - High clearance sprayer, Form A.3.5 |
ISO 11684 A.3.6 | Safety signs and hazard pictorials; Electrical shock/electrocution - Cotton harvester, Form A.3.6 |
ISO 11684 A.3.7 | Safety signs and hazard pictorials; Electrical shock/electrocution - Loader, Form A.3.7 |
ISO 11684 A.3.8 | Safety signs and hazard pictorials; Electrical shock/electrocution - Combine unloader auger, Form A.3.8 |
ISO 11684 A.4.1 | Safety signs and hazard pictorials; Falling from high place, Form A.4.1 |
ISO 11684 A.4.2 | Safety signs and hazard pictorials; Falling into machinery - Auger, Form A.4.2 |
ISO 11684 A.4.3 | Safety signs and hazard pictorials; Falling into machinery - Sharp edges, Form A.4.3 |
ISO 11684 A.4.4 | Safety signs and hazard pictorials; Falling into machinery - Rotating gears, Form A.4.4 |
ISO 11684 A.4.5 | Safety signs and hazard pictorials; Falling into machinery - Rollers, Form A.4.5 |
ISO 11684 A.4.6 | Safety signs and hazard pictorials; Falling or slipping on wet area, Form A.4.6 |
ISO 11684 A.4.7 | Safety signs and hazard pictorials; Falling from raised loader bucket, Form A.4.7 |
ISO 11684 A.5.1 | Safety signs and hazard pictorials; High pressure fluid - Injection into body, Form A.5.1 |
ISO 11684 A.5.2 | Safety signs and hazard pictorials; High pressure spray - Erosion of flesh, Form A.5.2 |
ISO 11684 A.6.1 | Safety signs and hazard pictorials; Crushing of fingers or hand - Force applied from above, Form A.6.1 |
ISO 11684 A.6.2 | Safety signs and hazard pictorials; Crushing of toes or foot - Force applied from above, Form A.6.2 |
ISO 11684 A.6.3 | Safety signs and hazard pictorials; Crushing of whole body - Force applied from above, Form A.6.3 |
ISO 11684 A.6.4 | Safety signs and hazard pictorials; Crushing of torso - Force applied from above, Form A.6.4 |
ISO 11684 A.6.5 | Safety signs and hazard pictorials; Crushing of torso - Force applied from side, Form A.6.5 |
ISO 11684 A.6.6 | Safety signs and hazard pictorials; Crushing of fingers or hands - Force applied from side, Form A.6.6 |
ISO 11684 A.6.7 | Safety signs and hazard pictorials; Crushing of leg - Force applied from side, Form A.6.7 |
ISO 11684 A.6.8 | Safety signs and hazard pictorials; Crushing - Round baler gate raising, Form A.6.8 |
ISO 11684 A.6.9 | Safety signs and hazard pictorials; Crushing - Round baler gate falling, Form A.6.9 |
ISO 11684 A.6.10 | Safety signs and hazard pictorials; Crushing of hand and arm - Tractor blade, Form A.6.10 |
ISO 11684 A.6.11 | Safety signs and hazard pictorials; Crushing of head, torso and arms - Spreader, Form A.6.11 |
ISO 11684 A.6.12 | Safety signs and hazard pictorials; Crushing - Planter or grain drill wing, Form A.6.12 |
ISO 11684 A.6.13 | Safety signs and hazard pictorials; Crushing - Marker arm, Form A.6.13 |
ISO 11684 A.6.14 | Safety signs and hazard pictorials; Crushing - Cultivator outrigger, Form A.6.14 |
ISO 11684 A.6.15 | Safety signs and hazard pictorials; Crushing - Rotary cutter, Form A.6.15 |
ISO 11684 A.6.16 | Safety signs and hazard pictorials; Crushing - Runaway bale, Form A.6.16 |
ISO 11684 A.6.17 | Safety signs and hazard pictorials; Crushing - Round baler push bar, Form A.6.17 |
ISO 11684 A.6.18 | Safety signs and hazard pictorials; Crushing - Loader bucket, Form A.6.18 |
ISO 11684 A.7.1 | Safety signs and hazard pictorials; Cutting of fingers or hand, Form A.7.1 |
ISO 11684 A.7.2 | Safety signs and hazard pictorials; Cutting of foot, Form A.7.2 |
ISO 11684 A.7.3 | Safety signs and hazard pictorials; Severing of fingers or hand - Mower blade, Form A.7.3 |
ISO 11684 A.7.4 | Safety signs and hazard pictorials; Severing of toes or foot - Mower blade, Form A.7.4 |
ISO 11684 A.7.5 | Safety signs and hazard pictorials; Severing of toes or fingers - Rotary mower blade, Form A.7.5 |
ISO 11684 A.7.6 | Safety signs and hazard pictorials; Cutting or entanglement of foot, Rotating auger, Form A.7.6 |
ISO 11684 A.7.7 | Safety signs and hazard pictorials; Cutting or entanglement of foot, Rotating auger, Form A.7.7 |
ISO 11684 A.7.8 | Safety signs and hazard pictorials; Severing of fingers or hand - Impeller blade, Form A.7.8 |
ISO 11684 A.7.9 | Safety signs and hazard pictorials; Dismemberment - Rear engine mower in forward motion, Form A.7.9 |
ISO 11684 A.7.10 | Safety signs and hazard pictorials; Dismemberment - Rear engine mower in rearward motion, Form A.7.10 |
ISO 11684 A.7.11 | Safety signs and hazard pictorials; Dismemberment - Front engine mower or lawn and garden tractor in forward motion, Form A.7.11 |
ISO 11684 A.7.12 | Safety signs and hazard pictorials; Dismemberment - Front engine mower or lawn and garden tractor in rearward motion, Form A.7.12 |
ISO 11684 A.7.13 | Safety signs and hazard pictorials; Severing of fingers or hand - Engine fan, Form A.7.13 |
ISO 11684 A.7.14 | Safety signs and hazard pictorials; Puncture of hand or fingers, Form A.7.14 |
ISO 11684 A.7.15 | Safety signs and hazard pictorials; Severing of toes or foot - Mower blade with flexible guard, Form A.7.15 |
ISO 11684 A.7.16 | Safety signs and hazard pictorials; Cutting of leg - Trimmer, Form A.7.16 |
ISO 11684 A.8.1 | Safety signs and hazard pictorials; Arm entanglement in machinery, Form A.8.1 |
ISO 11684 A.8.2 | Safety signs and hazard pictorials; Leg entanglement in machinery, Form A.8.2 |
ISO 11684 A.8.3 | Safety signs and hazard pictorials; Leg entanglement in machinery, Form A.8.3 |
ISO 11684 A.8.4 | Safety signs and hazard pictorials; Arm entanglement - Rotating gears, Form A.8.4 |
ISO 11684 A.8.5 | Safety signs and hazard pictorials; Fingers or hand entanglement - Rotating gears, Form A.8.5 |
ISO 11684 A.8.6 | Safety signs and hazard pictorials; Fingers or hand entanglement - Rotating rollers, Form A.8.6 |
ISO 11684 A.8.7 | Safety signs and hazard pictorials; Entanglement - Round baler or self-loading wagon, Form A.8.7 |
ISO 11684 A.8.8 | Safety signs and hazard pictorials; Entanglement - Cotton picker spindles, Form A.8.8 |
ISO 11684 A.8.9 | Safety signs and hazard pictorials; Whole body entanglement - Implement input drive line, Form A.8.9 |
ISO 11684 A.8.10 | Safety signs and hazard pictorials; Entanglement - Combine header, Form A.8.10 |
ISO 11684 A.8.11 | Safety signs and hazard pictorials; Arm entanglement - Feed rolls, Form A.8.11 |
ISO 11684 A.8.12 | Safety signs and hazard pictorials; Arm or upper torso entanglement - Rotating auger, Form A.8.12 |
ISO 11684 A.8.13 | Safety signs and hazard pictorials; Fingers or hand entanglement - Cotton stripper cleaner drive, Form A.8.13 |
ISO 11684 A.8.14 | Safety signs and hazard pictorials; Hand and arm entanglement - Chain or toothed belt drive, Form A.8.14 |
ISO 11684 A.8.15 | Safety signs and hazard pictorials; Arm entanglement - Post hole digger, Form A.8.15 |
ISO 11684 A.8.16 | Safety signs and hazard pictorials; Leg entanglement - Tedder rake, Form A.8.16 |
ISO 11684 A.8.17 | Safety signs and hazard pictorials; Arms and upper torso entanglement - Spreader beater, Form A.8.17 |
ISO 11684 A.8.18 | Safety signs and hazard pictorials; Arm entanglement - Broom reel, Form A.8.18 |
ISO 11684 A.8.19 | Safety signs and hazard pictorials; Hand and arm entanglement - Belt drive, Form A.8.19 |
ISO 11684 A.8.20 | Safety signs and hazard pictorials; Entanglement - Cotton picker conveyor drive, Form A.8.20 |
ISO 11684 A.8.21 | Safety signs and hazard pictorials; Entanglement - Crop feeder, Form A.8.21 |
ISO 11684 A.9.1 | Safety signs and hazard pictorials; Large thrown or flying object, Form A.9.1 |
ISO 11684 A.9.2 | Safety signs and hazard pictorials; Thrown or flying objects - Whole body exposure, Form A.9.2 |
ISO 11684 A.9.3 | Safety signs and hazard pictorials; Thrown or flying objects - Face exposure, Form A.9.3 |
ISO 11684 A.9.4 | Safety signs and hazard pictorials; Thrown or flying objects - Rotary cutter, Form A.9.4 |
ISO 11684 A.9.5 | Safety signs and hazard pictorials; Thrown or flying objects - Side-mounted rotary mower, Form A.9.5 |
ISO 11684 A.10.1 | Safety signs and hazard pictorials; Runover/backover - Tractor, Form A.10.1 |
ISO 11684 A.11.1 | Safety signs and hazard pictorials; Machine tipping - Riding mower, Form A.11.1 |
ISO 11684 A.11.2 | Safety signs and hazard pictorials; Machine rollover - ROPS, Form A.11.2 |
ISO 11684 A.12.1 | Safety signs and hazard pictorials; Kickback or upward motion - Round baler wrap arm handle, Form A.12.1 |
ISO 11684 A.13.1 | Safety signs and hazard pictorials; Hot surfaces - Burns to fingers or hands, Form A.13.1 |
ISO 11684 A.14.1 | Safety signs and hazard pictorials; Explosion, Form A.14.1 |
ISO 11684 A.14.2 | Safety signs and hazard pictorials; Fire or open flame, Form A.14.2 |
ISO 11684 B.2.1 | Safety signs and hazard pictorials; Stay clear of raised boom and bucket, Form B.2.1 |
ISO 11684 B.2.2 | Safety signs and hazard pictorials; Secure lifting cylinder with locking device before getting in hazardous area, Form B.2.2 |
ISO 11684 B.2.3 | Safety signs and hazard pictorials; Secure lifting cylinder with locking device before getting in hazardous area, Form B.2.3 |
ISO 11684 B.2.4 | Safety signs and hazard pictorials; Insert safety lock before getting in hazardous area, Form B.2.4 |
ISO 11684 B.2.5 | Safety signs and hazard pictorials; Never tip trailer on soft ground or on a slope, Form B.2.5 |
ISO 11684 B.2.6 | Safety signs and hazard pictorials; Stay a safe distance from the machine, Form B.2.6 |
ISO 11684 B.2.7 | Safety signs and hazard pictorials; Stay clear of draft link lifting range while operating rockshaft controls, Form B.2.7 |
ISO 11684 B.2.8 | Safety signs and hazard pictorials; Stay clear of baler gate swing area while tractor engine is running, Form B.2.8 |
ISO 11684 B.2.9 | Safety signs and hazard pictorials; Stay clear of raised gate unless safety lock is applied, Form B.2.9 |
ISO 11684 B.2.10 | Safety signs and hazard pictorials; Stay clear of articulation area while engine is running, Form B.2.10 |
ISO 11684 B.2.11 | Safety signs and hazard pictorials; Do not open or remove safety shields while engine is running, Form B.2.11 |
ISO 11684 B.2.12 | Safety signs and hazard pictorials; Never reach or climb into grain tank while engine is running, Form B.2.12 |
ISO 11684 B.2.13 | Safety signs and hazard pictorials; Put safety shield in place while grinding knives, Form B.2.13 |
ISO 11684 B.2.14 | Safety signs and hazard pictorials; Do not step on loading platform if PTO is connected to tractor and engine is running, Form B.2.14 |
ISO 11684 B.2.15 | Safety signs and hazard pictorials; Wait until all machine components have completely stopped before touching them, Form B.2.15 |
ISO 11684 B.2.16 | Safety signs and hazard pictorials; Start engine from operator's seat only, Form B.2.16 |
ISO 11684 B.2.17 | Safety signs and hazard pictorials; Shut off engine and remove key before performing maintenance or repair work, Form B.2.17 |
ISO 11684 B.2.18 | Safety signs and hazard pictorials; Do not ride on platform or ladder, Form B.2.18 |
ISO 11684 B.2.19 | Safety signs and hazard pictorials; Riding on this machine is allowed only on a passenger seat and only if the driver's view is not hindered, Form B.2.19 |
ISO 11684 B.2.20 | Safety signs and hazard pictorials; Always lock ROPS in upright position unless it must be folded down to allow operation underneath trees and bushes, Form B.2.20 |
ISO 11684 B.2.21 | Safety signs and hazard pictorials; Keep sufficient distance away from electrical power lines, Form B.2.21 |
ISO 11684 B.2.22 | Safety signs and hazard pictorials; Never reach into the crushing area as long as parts may move, Form B.2.22 |
ISO 11684 B.2.23 | Safety signs and hazard pictorials; Put safety shield in place while grinding knives, Form B.2.23 |
ISO 11684 B.2.24 | Safety signs and hazard pictorials; Consult Technical Manual for proper service procedures, Form B.2.24 |
ISO 11684 B.2.25 | Safety signs and hazard pictorials; Shut off engine and remove spark plug connector before performing maintenance or repair work, Form B.2.25 |
ISO 11684 B.2.26 | Safety signs and hazard pictorials; Never reach into pick-up area as long as tractor is running with PTO connected, Form B.2.26 |
ISO 11684 C Vertikal | For use on agricultural machinery and tractors as well as similar machinery, Form C - Pattern shield - Vertikal Empty |
ISO 11684 C Horizontal | For use on agricultural machinery and tractors as well as similar machinery, Form C - Pattern shield - Horizontal Empty |
ISO 3862 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids |
Status: 09/2023