Standards in PARTsolutions
The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.
An overview of the available standards can be found here:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
| ISO 1609 | Bolted flanges |
| ISO 1609 | Collars for clamped or rotatable flanges |
| ISO 1609 | Rotatable flanges with retaining ring |
| ISO 1609 | Vacuum flanges |
| ISO 1609 | Vacuum flanges with recess |
| ISO 6162-1 FCS | Split flange clamps |
| ISO 6162-1 FH | Flanged heads, form FH |
| ISO 6162-1 FHG | Flanged heads, form FHG |
| ISO 6162-1 FHGO | Flanged heads with O-ring, form FHGO |
| ISO 6162-1 O | O-rings |
| ISO 6162-1 FCS | Assembled flange connections with split flange clamp (FCS or FCSM) |
| ISO 6162-1 FC | One-piece flange clamps, form FC |
| ISO 6162-1 FC | Assembled flange connections with one-piece flange clamp (FC or FCM) |
| ISO 6162-2 FCS | Split flange clamps |
| ISO 6162-2 FC | One-piece flange clamps, form FC |
| ISO 6162-2 FH | Flange tubes with slot, form FH |
| ISO 6162-2 FHG | Flange tubes with slot, form FHG |
| ISO 6162-2 FHGO | Flange tubes with slot and O-ring, form FHGO |
| ISO 6162-2 O | O-rings |
| ISO 6162-2 FP | Flange connectors with one-piece flange clamps, form FP |
| ISO 6162-2 FPS | Flange connectors with split flange clamps, form FPS |
| ISO 7005-1 PN 2.5 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 6 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 10 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 16 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 20 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 25 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 40 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 50 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 110 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 150 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 260 | Metallic flanges - Part 1: Steel flanges |
| ISO 7005-1 PN 420 | Metallic flanges - Part 1: Steel flanges |
| ISO 1609 | Tubes for vacuum flanges |
| ISO 2938 | Hollow steel bars for machining |
| ISO 3183 | Steel pipes for pipeline transportation systems |
| ISO 4200 | Plain end steel tubes, welded and seamless |
| ISO 8535-1 | Steel tubes for high-preassure fuel injection pipes |
| ISO 10763 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes |
| ISO 15494 R | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), pipes |
| ISO 15494 FS-HE-M-A | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), socket fusion fittings, type A |
| ISO 15494 FS-HE-M-B | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), socket fusion fittings, type B |
| ISO 15494 FS-HE-S | Plastic piping systems for industrial applications - Polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), polypropylene (PP), butt fusion fittings |
| ISO 15494 FS-HWSS | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), electrofusion fittings |
| ISO 15494 VB | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), flange adaptors |
| ISO 15494 LF | Plastic piping systems for industrial applications - Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP), loose backing flanges |
| ISO 7638-1 Park power socket | Electrical connectors for braking system, park power sockets |
| ISO 7638-1 Power socket | Electrical connectors for braking system, power sockets |
| ISO 7638-1 Connector | Electrical connectors for braking systems, connectors |
| ISO 10243 | Compression springs with rectangular section |
| ISO 18286 | Hot-rolled stainless steel plates |
| ISO 9445 BL | Continuously rolled sheet metal from rustproof steel |
| ISO 9445 KB | Continuously rolled cold rolled strip (volume in widths smaller than 600mm) from rustproof steel |
| ISO 9445 KBB | Continuously rolled cold broadband (volume in roles more largely than 600mm) from rustproof steel |
| ISO 9445 KBS | Continuously rolled cold rolled strip in staffs from rustproof steel |
| ISO 16120-2 R | Non-alloy wire rods for conversion to wire |
| ISO 16120-2 SQ | Non-alloy wire rods for conversion to wire |
| ISO 16120-2 HEX | Non-alloy wire rods for conversion to wire |
| ISO 16120-2 RC | Non-alloy wire rods for conversion to wire |
| ISO 4783-2 | WWire screen |
| ISO 4783-3 A | On both sides curled woven wire cloth |
| ISO 4783-3 B | Uniaxial between curled woven wire cloth |
| ISO 4783-3 C | On both side between curled woven wire cloth |
| ISO 4783-3 D | On both sides before cranked woven wire cloth |
| ISO 4783-3 E | On both sides before cranked woven wire cloth, smooth-sided |
| ISO 4783-3 F | Press welded woven wire cloth |
| ISO 2020-1 | Aerospace - Preformed flexible steel wire ropes for aircraft controls |
| ISO 14632 | Plates from PE |
| ISO 15527 | Compression-moulded sheets of polyethylene (PE-UHMW, PE-HD) |
| ISO 1127 | Stainless steel tubes |
| ISO 6931-1 | Spring steel wires |
| ISO 6020-1 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MF1 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MF2 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MF3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MF4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MP3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MP4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MP5 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MP6 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MS2 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6020-1 MT4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series |
| ISO 6022 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MF3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MF4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MP3 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MP4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MP5 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MP6 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 6022 MT4 | Hydraulic fluid power - Mounting dimensions for single rod cylinders, 25 MPa (250 bar) series |
| ISO 8132 AP2 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP2 - Clevis with female threads |
| ISO 8132 AF3 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AF3 - Flange head, round |
| ISO 8132 AB4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AB4 - Fork swivel bearing block, just |
| ISO 8132 AB3 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AB3 - Fork swivel bearing block, angularly |
| ISO 8132 AT4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AT4 - Bearing block for trunnion execution |
| ISO 8132 AA8 | Hydraulic fluid power - Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series - Mounting dimensions for accessories, form AA8 - Pin for clevis or rod eye (splint pin or snap ring design) |
| ISO 8132 AP6 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP6 - Joint head with female threads |
| ISO 8132 AP4 | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AP4 - Swivel head with female threads |
| ISO 8132 AA4-R | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA4-R - Pin for swivel head (circlip or snap ring version) |
| ISO 8132 AA6-R | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA6-R - Pin for joint head (circlip or snap ring version) |
| ISO 8132 AA4-S | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA4-S - Pin for swivel head (split pins) |
| ISO 8132 AA6-S | Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250bar) series, form AA6-S - Pin for joint head (split pins) |
| ISO 1002 Table 1 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 0 |
| ISO 1002 Table 2 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 3 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9 |
| ISO 1002 Table 4 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 5 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 6 | Single row barrel roller bearing, seal or deck washer, diameter row 3 |
| ISO 1002 Table 11 | Single row radial deep groove ball bearing with seal or deck washer |
| ISO 1002 Table 12 | Single row radial deep groove ball bearing with seal or deck washer |
| ISO 1002 Table 13 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
| ISO 1002 Table 14 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
| ISO 1002 Table 15 | Double row angular contact radial ball bearing with seal washer |
| ISO 1002 Table 16 | Double row self aligning roller bearings with seal or deck washer |
| ISO 1002 Table 17 | Single row barrel roller bearings with deck washer |
| ISO 1002 Table 18 | Double row barrel roller bearing with deck washer |
| ISO 1002 Table 19 | Needle roller bearings with deck washer |
| ISO 1002 Table 20 | Needle roller bearing, support rolls, single row, with deck washer |
| ISO 1002 Table 21 | Needle roller bearing, support rolls, double row, with deck washer |
| ISO 1002 Table 1 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 0 |
| ISO 1002 Table 2 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 3 | Single row radial deep groove ball bearings, seal or deck washer, diameter row 8+9 |
| ISO 1002 Table 4 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 5 | Double row radial deep groove ball bearings, seal or deck washer, diameter row 2 |
| ISO 1002 Table 6 | Single row barrel roller bearing, seal or deck washer, diameter row 3 |
| ISO 1002 Table 11 | Single row radial deep groove ball bearing with seal or deck washer |
| ISO 1002 Table 12 | Single row radial deep groove ball bearing with seal or deck washer |
| ISO 1002 Table 13 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
| ISO 1002 Table 14 | Single row radial deep groove ball bearing, for torsion tubes, extra, light with seal or deck washer |
| ISO 1002 Table 15 | Double row angular contact radial ball bearing with seal washer |
| ISO 1002 Table 16 | Double row self aligning roller bearings with seal or deck washer |
| ISO 1002 Table 17 | Single row barrel roller bearings with deck washer |
| ISO 1002 Table 18 | Double row barrel roller bearing with deck washer |
| ISO 1002 Table 19 | Needle roller bearings with deck washer |
| ISO 1002 Table 20 | Needle roller bearing, support rolls, single row, with deck washer |
| ISO 1002 Table 21 | Needle roller bearing, support rolls, double row, with deck washer |
| ISO 355 series 2-1 | Single-row tapered roller bearings, series 2 figure 1 |
| ISO 355 series 2-1 | Single-row tapered roller bearings, series 2 figure 1 |
| ISO 355 series 3-1 | Single-row tapered roller bearings, series 3 figure 1 |
| ISO 355 series 3-1 | Single-row tapered roller bearings, series 3 figure 1 |
| ISO 355 series 4-1 | Single-row tapered roller bearings, series 4 figure 1 |
| ISO 355 series 4-1 | Single-row tapered roller bearings, series 4 figure 1 |
| ISO 355 series 5-1 | Single-row tapered roller bearings, series 5 figure 1 |
| ISO 355 series 5-1 | Single-row tapered roller bearings, series 5 figure 1 |
| ISO 355 series 7-1 | Single-row tapered roller bearings, series 7 figure 1 |
| ISO 355 series 7-1 | Single-row tapered roller bearings, series 7 figure 1 |
| ISO 355 series 2-4 | Single-row tapered roller bearings with flanged outer ring, series 2 figure 4 |
| ISO 355 series 3-4 | Single-row tapered roller bearings with flanged outer ring, series 3 figure 4 |
| ISO 355 series 4-4 | Single-row tapered roller bearings with flanged outer ring, series 4 figure 4 |
| ISO 355 series 7-4 | Single-row tapered roller bearings with flanged outer ring, series 7 figure 4 |
| ISO 355 series 2-4 | Single-row tapered roller bearings with flanged outer ring, series 2 figure 4 |
| ISO 355 series 3-4 | Single-row tapered roller bearings with flanged outer ring, series 3 figure 4 |
| ISO 355 series 4-4 | Single-row tapered roller bearings with flanged outer ring, series 4 figure 4 |
| ISO 355 series 7-4 | Single-row tapered roller bearings with flanged outer ring, series 7 figure 4 |
| ISO 355 series 2-2 | Double-row tapered roller bearings with double raceway outer ring, series 2 figure 2 |
| ISO 355 series 3-2 | Double-row tapered roller bearings with double raceway outer ring, series 3 figure 2 |
| ISO 355 series 4-2 | Double-row tapered roller bearings with double raceway outer ring, series 4 figure 2 |
| ISO 355 series 7-2 | Double-row tapered roller bearings with double raceway outer ring, series 7 figure 2 |
| ISO 355 series 2-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 2 figure 3 |
| ISO 355 series 3-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 3 figure 3 |
| ISO 355 series 4-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 4 figure 3 |
| ISO 355 series 7-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 7 figure 3 |
| ISO 355 series 2-2 | Double-row tapered roller bearings with double raceway outer ring, series 2 figure 2 |
| ISO 355 series 3-2 | Double-row tapered roller bearings with double raceway outer ring, series 3 figure 2 |
| ISO 355 series 4-2 | Double-row tapered roller bearings with double raceway outer ring, series 4 figure 2 |
| ISO 355 series 7-2 | Double-row tapered roller bearings with double raceway outer ring, series 7 figure 2 |
| ISO 355 series 2-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 2 figure 3 |
| ISO 355 series 3-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 3 figure 3 |
| ISO 355 series 4-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 4 figure 3 |
| ISO 355 series 7-3 | Matched pair of tapered roller bearings in back-to-back arrangement with spacers, series 7 figure 3 |
| ISO 12240-1 C | Spherical plain radial bearings, form C |
| ISO 12240-1 E | Spherical plain radial bearings, form E |
| ISO 12240-1 G | Spherical plain radial bearings, form G |
| ISO 12240-1 H | Spherical plain radial bearings, form H |
| ISO 12240-1 K | Spherical plain radial bearings, form K |
| ISO 12240-1 W | Spherical plain radial bearings, form W |
| ISO 12240-2 | Spherical plain bearings - Part 2: Angular cantact radial spherical plain |
| ISO 12240-3 | Spherical plain bearing - Part 3: Thrust spherical plain bearings |
| ISO 12240-4 F | Joint heads with inner thread form F |
| ISO 12240-4 M | Joint heads with outer thread, form M |
| ISO 12240-4 S | Joint heads with welding end, form S |
| ISO 2795 | Plain bearings - Sintered bushes - Cylindrical bearings |
| ISO 2795 | Plain bearings - Sintered bushes - Flanged bearings |
| ISO 2795 | Plain bearings - Sintered bushes - Spherical bearings |
| ISO 3547-1 C | Plain bearings - Wrapped bushes, type C cylindrical bush |
| ISO 3547-1 F | Plain bearings - Wrapped bushes, type F flanged bush |
| ISO 4379 C | Plain bearing - Copper alloy bushes, form C |
| ISO 4379 F | Plain bearings - Copper alloy bushes, form F |
| ISO 2982-1 A | Rolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type A |
| ISO 2982-1 B | Rolling bearings - Accessories - Part 1: Tapered sleeves, adapter sleeves with taper 1:12, type B |
| ISO 2982-1 C | Rolling bearings - Accessories - Part 1: Tapered sleeves, withdrawal sleeves with taper 1:12 and 1:30 type C |
| ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, locking clips |
| ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices |
| ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, bent tab lockwashers |
| ISO 2982-2 | Rolling bearings - Accessories - Part 2: Locknuts and locking devices, straight tab lockwashers |
| ISO 3290-1 | Rolling bearings - Balls - Part1: Steel balls |
| ISO 3290-2 | Rolling bearings - Balls - Part2: Ceramic balls |
| ISO 10511 | Prevailing torque type hexagon, thin nuts, (with non-metallic insert) |
| ISO 7040 | Prevailing torque type hexagon nuts, (with non-metallic insert), style1 |
| ISO 7041 | Prevailing torque type hexagon nuts (with non-metalic insert), style 2 |
| ISO 7042 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 |
| ISO 10512 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch |
| ISO 10513 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12 |
| ISO 7719 | Prevailing torque type (all-metal hexagon nuts), type 1 – property classes 5, 8 and 10 |
| ISO 4032 | Hexagon nuts, style 1 - Product grades A and B |
| ISO 4034 | Hexagon nuts - Product grades C |
| ISO 4033 | Hexagon nuts, style 2 - Product grades A and B |
| ISO 4035 | Hexagon thin nuts (chamfered) - Product grades A and B |
| ISO 4036 | Hexagon thin nuts (unchamfered) - Product grade B |
| ISO 8673 | Hexagon nuts, type 1, with metric fine pitch thread |
| ISO 8674 | Hexagon nuts, type 2, with metric fine pitch thread |
| ISO 8675 | Hexagon thin nuts with metric fine pitch thread, Product grades A and B |
| ISO 10663 | Hexagon nuts with flange, style 2, fine pitch thread |
| ISO 21670 | Hexagon weld nuts with flange |
| ISO 4161 | Hexagon nuts with flange - Coarse thread |
| ISO 5599-1 | Pneumatic fluid power - Five-port directional control valves - Part 1: Mounting interface surfaces without electrical connector |
| ISO 8434-1 S | 24° cone connectors - Straight connection unions, form S |
| ISO 8434-1 SC | 24° cone connectors - Straight connectors, form SC |
| ISO 8434-1 SDS-F | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SDS-F |
| ISO 8434-1 SDSC-F | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SDSC-F |
| ISO 8434-1 SDS-E | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-2 or ISO 9974-2, form SDS-E |
| ISO 8434-1 SDSC-E | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-2 or ISO 9974-2, form SDSC-E |
| ISO 8434-1 SDS-B | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-4 or ISO 9974-3, form SDS-B |
| ISO 8434-1 SDSC-B | 24° cone connectors - Screw-in connectors with screw-in spigots according to ISO 1179-4 or ISO 9974-3, form SDSC-B |
| ISO 8434-1 SWOSDS-E | 24° cone connectors - Straight adjustable screw-in socket with elastomer seal with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-E |
| ISO 8434-1 SWOSDS-F | 24° cone connectors - Straight adjustable screw-in socket with O-ring with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-F |
| ISO 8434-1 SWOSDS-B_Metric | 24° cone connectors - Straight adjustable screw-in socket with metallic seal with screw-in spigot according to ISO 6149-2 (series S) or ISO 6149-3 (series L), form SWOSDS-B |
| ISO 8434-1 SWODS-E | 24° cone connectors - Straight adjustable screw-in socket with elastomer seal with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-E |
| ISO 8434-1 SWODS-F | 24° cone connectors - Straight adjustable screw-in socket with O-ring with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-F |
| ISO 8434-1 SWODS-B | 24° cone connectors - Straight adjustable screw-in socket with metallic seal with screw-in spigot according to ISO 1179-2 or ISO 9974-2, form SWODS-B |
| ISO 8434-1 E | 24° cone connectors - Pipe unions with elbow 90°, form E |
| ISO 8434-1 EC | 24° cone connectors - Connectors with elbow 90°, form EC |
| ISO 8434-1 SWOE | 24° cone connectors - Directionally adjustable elbow connectors with O-ring, form SWOE |
| ISO 8434-1 SWOEC | 24° cone connectors - Directionally adjustable elbow connectors with O-ring, form SWOEC |
| ISO 8434-1 T | 24° cone connectors - Pipe T-unions, form T |
| ISO 8434-1 TC | 24° cone connectors - T-connectors, form TC |
| ISO 8434-1 SWORT | 24° cone connectors - T-pieces / continuity with O-ring, form SWORT |
| ISO 8434-1 SWORTC | 24° cone connectors - T-connectors / continuity with O-ring, form SWORTC |
| ISO 8434-1 SWOBT | 24° cone connectors - T-pieces / outlet with O-ring, form SWOBT |
| ISO 8434-1 SWOBTC | 24° cone connectors - T-connectors / outlet with O-ring, form SWOBTC |
| ISO 8434-1 K | 24° cone connectors - Cross union fittings, form K |
| ISO 8434-1 KC | 24° cone connectors - Cross connesctors, form KC |
| ISO 8434-1 BHS | 24° cone connectors - Straight bulkheads, form BHS |
| ISO 8434-1 BHSC | 24° cone connectors - Straight bulkhead connectors, form BHSC |
| ISO 8434-1 BHE | 24° cone connectors - Angle bulkheads, form BHE |
| ISO 8434-1 BHEC | 24° cone connectors - Angle bulkhead connectors, form BHEC |
| ISO 8434-1 WDBHS | 24° cone connectors - Straight welded bulkheads, form WDBHS |
| ISO 8434-1 WDBHSC | 24° cone connectors - Straight welded bulkhead connectors, form WDBHSC |
| ISO 8434-1 RDSW | 24° cone connectors - Just directionally adjustable reducers with O-ring, form RDSW |
| ISO 8434-1 RDSWC | 24° cone connectors - Just directionally adjustable connectors with O-ring, form RDSWC |
| ISO 8434-1 WDNP-A | 24° cone connectors - Weld nipples, form WDNP-A |
| ISO 8434-1 WDNP-B | 24° cone connectors - Weld nipples, form WDNP-B |
| ISO 8434-1 WDRDNP | 24° cone connectors - Reducing welding nipples, form WDRDNP |
| ISO 8434-1 WDS | 24° cone connectors - Straight weld trims, form WDS |
| ISO 8434-1 WDSC | 24° cone connectors - Straight connectors, form WDSC |
| ISO 8434-1 PL | 24° cone connectors - Plugs with O-ring, form PL |
| ISO 8434-1 CR | 24° cone connectors - Compression rings, Form CR |
| ISO 8434-1 N | 24° cone connectors - Cap nuts, form N |
| ISO 8434-1 LN | 24° cone connectors - Counternuts, form LN |
| ISO 8434-1 Ring | 24° cone connectors - Rings |
| ISO 8434-2 S | Straight union fittings, form S |
| ISO 8434-2 SDS | Stud fittings with ISO 1179-3 non-adjustable stud ends, form SDS |
| ISO 8434-2 SDS | Stud fittings with ISO 6149-3 non-adjustable stud ends, form SDS |
| ISO 8434-2 SDS | Stud fittings with ISO 11926-3 non-adjustable stud ends, form SDS |
| ISO 8434-2 E | Elbow union fittings, form E |
| ISO 8434-2 SDE | Stud fittings with ISO 1179-3 90° adjustable stud elbows, form SDE |
| ISO 8434-2 SDE45 | Stud fittings with ISO 1179-3 45° adjustable stud elbows, form SDE45 |
| ISO 8434-2 SDE | Stud fittings with ISO 6149-3 90° adjustable stud elbows, form SDE |
| ISO 8434-2 SDE45 | Stud fittings with ISO 6149-3 45° adjustable stud elbows, form SDE45 |
| ISO 8434-2 SDE | Stud fittings with ISO 11926-3 90° adjustable stud elbows, form SDE |
| ISO 8434-2 SDE45 | Stud fittings with ISO 11926-3 45° adjustable stud elbows, form SDE45 |
| ISO 8434-2 T | Tee union fittings, form T |
| ISO 8434-2 SDBT | Stud fittings with ISO 1179-3 adjustable stud branch tee, form SDBT |
| ISO 8434-2 SDBT | Stud fittings with ISO 6149-3 adjustable stud branch tee, form SDBT |
| ISO 8434-2 SDBT | Stud fittings with ISO 11926-3 adjustable stud branch tee, form SDBT |
| ISO 8434-2 K | Cross union fittings, form K |
| ISO 8434-2 SDRT | Stud fittings with ISO 1179-3 adjustable stud run tee, form SDRT |
| ISO 8434-2 SDRT | Stud fittings with ISO 6149-3 adjustable stud run tee, form SDRT |
| ISO 8434-2 SDRT | Stud fittings with ISO 11926-3 adjustable stud run tee, form SDRT |
| ISO 8434-2 SWE | 90° swivel elbows, form SWE |
| ISO 8434-2 SWBT | Swivel branch tees, form SWBT |
| ISO 8434-2 SWRT | Swivel run tees, form SWRT |
| ISO 8434-2 SWE45 | 45° swivel elbows, form SWE45 |
| ISO 8434-2 BHS | 37° flared bulkhead union fittings, form BHS |
| ISO 8434-2 BHE | 37° flared bulkhead union fittings, 90° bulkhead elbow, form BHE |
| ISO 8434-2 BHE45 | 37° flared bulkhead union fittings, 45° bulkhead elbow, form BHE45 |
| ISO 8434-2 BHBT | 37° flared bulkhead union fittings, bulkhead branch tee, form BHBT |
| ISO 8434-2 BHRT | 37° flared bulkhead union fittings, bulkhead run tee, form BHRT |
| ISO 8434-2 BHLN | Bulkhead locknuts, form BHLN |
| ISO 8434-2 REE | Reducing elbows, form REE |
| ISO 8434-2 RES | Reducing fittings, form RES |
| ISO 8434-2 RERT | Reducing run tees, form RERT |
| ISO 8434-2 REBT | Reducing branch tees, form REBT |
| ISO 8434-2 MSL | Sleeves, form MSL |
| ISO 8434-2 ISL | Sleeves, form ISL |
| ISO 8434-2 N | Tube nuts, form N |
| ISO 8434-2 CP | Caps, form CP |
| ISO 8434-2 PL | Plugs, form PL |
| ISO 8434-3 BRSL-A | Braze sleeves, form BRSL-A |
| ISO 8434-3 BRSL-B | Braze sleeves, form BRSL-B |
| ISO 8434-3 BRRDSL-A | Braze-on reducing sleeves, form BRRDSL-A |
| ISO 8434-3 BRRDSL-B | Braze-on reducing sleeves, form BRRDSL-B |
| ISO 8434-3 BRS | Braze-on straight connectors, form BRS |
| ISO 8434-3 S | Straight union connectors, form S |
| ISO 8434-3 SDS | Straight stud connectors, form SDS |
| ISO 8434-3 SDSL | Long stud connectors, form SDSL |
| ISO 8434-3 SDSWS | Stud straight swivels, form SDSWS |
| ISO 8434-3 E | 90° elbow union connectors, form E |
| ISO 8434-3 SDE | 90° adjustable stud elbows, form SDE |
| ISO 8434-3 SDE45 | 45° adjustable stud elbows, form SDE45 |
| ISO 8434-3 SDEL | Long drop elbow stud connectors, form SDEL |
| ISO 8434-3 T | Tee union connectors, form T |
| ISO 8434-3 SDBT | Adjustable stud branch tees, form SDBT |
| ISO 8434-3 SDRT | Adjustable stud run tees, form SDRT |
| ISO 8434-3 K | Cross union connectors, form K |
| ISO 8434-3 SDK | Adjustable stud crosses, form SDK |
| ISO 8434-3 SDSWE | Swivel 90° adjustable stud elbows, form SDSWE |
| ISO 8434-3 SWBT | Swivel branch tees, form SWBT |
| ISO 8434-3 SWE | Swivel elbows, form SWE |
| ISO 8434-3 SWRT | Swivel run tees, form SWRT |
| ISO 8434-3 BHS | Straight bulkheads, form BHS |
| ISO 8434-3 BHE | 90° bulkhead elbows, form BHE |
| ISO 8434-3 BHRT | Bulkhead run tees, form BHRT |
| ISO 8434-3 BHBT | Bulkhead branch tees, form BHBT |
| ISO 8434-3 BHE45 | 45° bulkhead elbows, form BHE45 |
| ISO 8434-3 BHLN | Bulkhead locknuts, form BHLN |
| ISO 8434-3 RDA | Reducers with nut, form RDA |
| ISO 8434-3 RDB | Reducers without nut, form RDB |
| ISO 8434-3 WDNP | Weld-on nipples, form WDNP |
| ISO 8434-3 PL | Plugs, form PL |
| ISO 8434-3 NA | Standard tube nuts, form NA |
| ISO 8434-3 NB | High-strength tube nuts, form NB |
| ISO 8434-3 CP | Caps, form CP |
| ISO 8434-4 SWSDS-OR | EGE-unions, Screwed unions width O-Ring, form SWSDS, type OR |
| ISO 8434-4 SWSDS-ED | EGE-unions, Screwed unions width elastomer seal, form SWSDS, type E |
| ISO 8434-4 Ring | O-rings |
| ISO 8434-4 WDRE | RED-NippIes, Welding nipples-reducing nipples, form WDRE |
| ISO 8434-4 RESWS | RED-unions, Reducing unions, straight adjustable, form RESWS |
| ISO 8434-4 RESWSC | RED-connections, Reducing connections, straight adjustable, form RESWSC |
| ISO 8434-4 NP | Welding nipples width O-RING |
| ISO 8434-4 SWBT | ET-unions, direction adjustable outflow, form SWBT |
| ISO 8434-4 SWBTC | ET-connenctions, direction adjustable outflow, Form SWBTC |
| ISO 8434-4 SWRT | EL-unions, direction adjustable pass, Form SWRT |
| ISO 8434-4 SWRTC | EL-connenctions, direction adjustable pass, Form SWRTC |
| ISO 8434-4 SWE | EW-unions, elbow unions direction adjustable, form SWE |
| ISO 8434-4 SWEC | EW-connenctions, Elbow unions direction adjustable, form SWEC |
| ISO 8434-6 BRS | Braze-on straight connectors, form BRS |
| ISO 8434-6 BRNP-A | Braze-on nipples, form BRNP, with O-ring |
| ISO 8434-6 BRNP-B | Braze-on nipples, form BRNP, without O-ring |
| ISO 8434-6 S | Straight connectors, form S |
| ISO 8434-6 SWS-A | Straight swivel connectors, form SWS, with O-ring |
| ISO 8434-6 SWS-B | Straight swivel connectors, form SWS, without O-ring |
| ISO 8434-6 SWSDS-A | Straight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, with O-ring |
| ISO 8434-6 SWSDB-B | Straight stud swivel connectors with ISO 6149-3 stud end, form SWSDS, without O-ring |
| ISO 8434-6 SWSDS-E-A | Straight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, with O-ring |
| ISO 8434-6 SWSDS-E-B | Straight stud swivel connectors with ISO 1179-2 type E stud end (L series), form SWSDS, without O-ring |
| ISO 8434-6 SWSDS-G-A | Straight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, with O-ring |
| ISO 8434-6 SWSDS-G-B | Straight stud swivel connectors with ISO 1179-3 type G stud end, form SWSDS, without O-ring |
| ISO 8434-6 SDS | Straight stud connectors with ISO 6149-3 stud end, form SDS |
| ISO 8434-6 SDS-E | Straight stud connectors with ISO 1179-2 type E stud end (L series), form SDS |
| ISO 8434-6 SDS-G | Straight stud connectors with ISO 1179-3 type G stud end, form SDS |
| ISO 8434-6 E | 90° elbow connectors, form E |
| ISO 8434-6 E45 | 45° elbow connectors, form E45 |
| ISO 8434-6 SWE-A | 90° swivel elbow connectors, form SWE, with O-ring |
| ISO 8434-6 SWE-B | 90° swivel elbow connectors, form SWE, without O-ring |
| ISO 8434-6 SWE45-A | 45° swivel elbow connectors, form SWE45, with O-ring |
| ISO 8434-6 SWE45-B | 45° swivel elbow connectors, form SWE45, without O-ring |
| ISO 8434-6 SWSDE-A | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, with O-ring |
| ISO 8434-6 SWSDE-B | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE, without O-ring |
| ISO 8434-6 SWSDE45-A | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, with O-ring |
| ISO 8434-6 SWSDE45-B | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SWSDE45, without O-ring |
| ISO 8434-6 SWSDE-H-A | 90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, with O-ring |
| ISO 8434-6 SWSDE-H-B | 90° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE, without O-ring |
| ISO 8434-6 SWSDE45-H-A | 45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, with O-ring |
| ISO 8434-6 SWSDE45-H-B | 45° swivel adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SWSDE45, without O-ring |
| ISO 8434-6 SDE | 90° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE |
| ISO 8434-6 SDE45 | 45° adjustable stud elbow connectors with ISO 6149-3 adjustable stud end, form SDE45 |
| ISO 8434-6 SDE-H | 90° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE |
| ISO 8434-6 SDE45-H | 45° adjustable stud elbow connectors with ISO 1179-3 type H stud end, form SDE45 |
| ISO 8434-6 T | Male tee connectors, form T |
| ISO 8434-6 SWBT-A | Swivel branch tee connectors, form SWBT, with O-ring |
| ISO 8434-6 SWBT-B | Swivel branch tee connectors, form SWBT, without O-ring |
| ISO 8434-6 SWRT-A | Swivel run tee connectors, form SWRT, with O-ring |
| ISO 8434-6 SWRT-B | Swivel run tee connectors, form SWRT, without O-ring |
| ISO 8434-6 BHS | Straight bulkhead connectors, form BHS |
| ISO 8434-6 BHE | 90° bulkhead elbow connectors, form BHE |
| ISO 8434-6 WDNP-1-A | Weld-on nipples, form WDNP, type 1, with O-ring |
| ISO 8434-6 WDNP-1-B | Weld-on nipples, form WDNP, type 1, without O-ring |
| ISO 8434-6 WDNP-2-A | Weld-on nipples, form WDNP, type 2, with O-ring |
| ISO 8434-6 WDNP-2-B | Weld-on nipples, form WDNP, type 2, without O-ring |
| ISO 8434-6 N | Loose style nuts for weld-on nipples, form N |
| ISO 8434-6 LN | Locknuts, form LN |
| ISO 8434-6 Ring | O-rings |
| ISO 12151-1 S | Male hose fittings, straight, form S |
| ISO 12151-1 SWSA | Female swivel hose fittings, straight, form SWSA |
| ISO 12151-1 SWSB | Female swivel hose fittings, straight, form SWSB |
| ISO 12151-1 SWE45S | Female swivel hose fittings, 45° elbow, form SWE45S |
| ISO 12151-1 SWE45M | Female swivel hose fittings, 45° elbow, form SWE45M |
| ISO 12151-1 SWES | Female swivel hose fittings, 90° elbow, form SWES |
| ISO 12151-1 SWEM | Female swivel hose fittings, 90° elbow, form SWEM |
| ISO 12151-1 SWEL | Female swivel hose fittings, 90° elbow, form SWEL |
| ISO 12151-2 SWS | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight fitting with swivel nut, form SWS |
| ISO 12151-2 SWE45 | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 45°-elbow fitting with swivel nut, form SWE45 |
| ISO 12151-2 SWE | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, 90°-elbow fitting with swivel nut, form SWE |
| ISO 12151-2 S | Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings, straight threaded stud, form S |
| ISO 12151-3 S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, straight hose fitting, form S |
| ISO 12151-3 E45S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, short, form E45S |
| ISO 12151-3 E45M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 45°-flange curve fitting, medium, form E45M |
| ISO 12151-3 ES | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, short, form ES |
| ISO 12151-3 EM | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 90°-flange curve fitting, medium, form EM |
| ISO 12151-3 E22M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 22.5°-flange curve fitting, medium, form E22M |
| ISO 12151-3 E30S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, short, form E30S |
| ISO 12151-3 E30M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 30°-flange curve fitting, medium, form E30M |
| ISO 12151-3 E60S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, short, form E60S |
| ISO 12151-3 E60M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 60°-flange curve fitting, medium, form E60M |
| ISO 12151-3 E67S | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, short, form E67S |
| ISO 12151-3 E67M | Hose fittings – Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends, 67.5°-flange curve fitting, medium, form E67M |
| ISO 1179-2 | Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) |
| ISO 9974-2 | Einschraubzapfen mit Elastomerdichtung (Typ E), leichte Reihe (L-Reihe)_x000D_ und schwere Reihe (S-Reihe) |
| ISO 1179-3 | Non-directional screw-in studs of the light series (L) according to ISO 1179-3 - Form G |
| ISO 1179-3 | Richtungseinstellbarer Einschraubzapfen_x000D_ der leichten Reihe (L) nach ISO 1179-3 — Form H |
| ISO 1179-4 | Stud ends for general use only with metal-to-metal sealing (type B) |
| ISO 9974-3 | Stud ends with metal-to-metal sealing (type B) |
| ISO 1179-2 | Elastomeric seals for use with ISO 1179-2 heavy-duty (S series) |
| ISO 1179-3 | O-rings for screw-in pins of the light series (L) according to ISO 1179-3 |
| ISO 1179-3 | Support rings for screw-in lugs of the light series (L) according to ISO 1179-3 |
| ISO 9974-2 | Elastomer seals for use with studs, light series (L series) |
| ISO 15482 H | Cross recessed countersunk head drilling screws with tapping, form H |
| ISO 15482 Z | Cross recessed countersunk head drilling screws with tapping, form Z |
| ISO 1479 C | Hexagon head tapping screws, form C |
| ISO 1479 F | Hexagon head tapping screws, form F |
| ISO 1479 R | Hexagon head tapping screws, form R |
| ISO 1481 C | Slotted pan head tapping screws, form C |
| ISO 1481 F | Slotted pan head tapping screws, form F |
| ISO 1482 C | Slotted countersunk flat head tapping screws, form C |
| ISO 1482 F | Slotted countersunk flat head tapping screws, form F |
| ISO 1483 C | Slotted raised countersunk oval head tapping screws, form C |
| ISO 1483 F | Slotted raised countersunk oval head tapping screws, form F |
| ISO 7049 C-H | Cross recessed pan head tapping screws, form c-H |
| ISO 7049 C-Z | Cross recessed pan head tapping screws, form C-Z |
| ISO 7049 F-H | Cross recessed pan head tapping screws, form F-H |
| ISO 7049 F-Z | Cross recessed pan head tapping screws, form F-Z |
| ISO 7049 R-H | Cross recessed pan head tapping screws, form R-H |
| ISO 7049 R-Z | Cross recessed pan head tapping screws, form R-Z |
| ISO 7050 C-H | Cross recessed countersunk flat head tapping screws, form C-H |
| ISO 7050 C-Z | Cross recessed countersunk flat head tapping screws, form C-Z |
| ISO 7050 F-H | Cross recessed countersunk flat head tapping screws, form F-H |
| ISO 7050 F-Z | Cross recessed countersunk flat head tapping screws, form F-Z |
| ISO 7050 R-H | Cross recessed countersunk flat head tapping screws |
| ISO 7050 R-Z | Cross recessed countersunk flat head tapping screws |
| ISO 7051 C-H | Cross recessed raised countersunk oval head tapping screws, form C-H |
| ISO 7051 C-Z | Cross recessed raised countersunk oval head tapping screws, form C-Z |
| ISO 7051 F-H | Cross recessed raised countersunk oval head tapping screws, form F-H |
| ISO 7051 F-Z | Cross recessed raised countersunk oval head tapping screws, form F-Z |
| ISO 7051 R-H | Cross recessed raised countersunk oval head tapping screws, form R-H |
| ISO 7051 R-Z | Cross recessed raised countersunk oval head tapping screws, form R-Z |
| ISO 15480 | Hexagon washer head drilling screws with tapping screw thread |
| ISO 15481 H | Cross recessed pan head drilling screws, form H |
| ISO 15481 Z | Cross recessed pan head drilling screws, form Z |
| ISO 15483 H | Cross recessed raised countersunk head drilling screws with tapping screw thread, form H |
| ISO 15483 Z | Cross recessed raised countersunk head drilling screws with tapping screw thread, form Z |
| ISO 7053 C | Hexagon washer head tapping screws with collar, form C |
| ISO 7053 F | Hexagon washer head tapping screws with collar, form F |
| ISO 7053 R | Hexagon washer head tapping screws with collar, form R |
| ISO 4766 | Slotted set screws with flat point |
| ISO 7434 | Slottet set screws with cone point |
| ISO 7435 | Slotted set screws with long dog point |
| ISO 7436 | Slotted set screws with cup point |
| ISO 2342 | Slotted headless screws with shank |
| ISO 4026 | Hexagon socket set screws with flat point |
| ISO 4027 | Hexagon socket set screws with cone point |
| ISO 4028 | Hexagon socket set screws with dog point |
| ISO 4029 | Hexagon socket set screws with cup point |
| ISO 10644 S1 | Screws and washer assemblies with plain washers. Hexagon sheet metal screws with thread to head |
| ISO 10644 S2 | Screws and washer assemblies with plain washers. Head cap bolts with shank |
| ISO 10644 S3 | Screws and washer assemblies with plain washers |
| ISO 10644 S4 | Screws and washer assemblies with plain washers. Head cap bolts with inside hexagonal |
| ISO 10644 S5 | Screws and washer assemblies with plain washers |
| ISO 10644 S6 | Screws and washer assemblies with plain washers. Head cap bolts with slot |
| ISO 10644 S10 | Screws and washer assemblies with plain washers |
| ISO 10644 S11 | Screws and washer assemblies with plain washers |
| ISO 10644 S12 | Screws and washer assemblies with plain washers |
| ISO 10644 S13 | Screws and washer assemblies with plain washers |
| ISO 10510 C-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 C, short sign S1 |
| ISO 10510 F-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 F, short sign S1 |
| ISO 10510 R-S1 | Tapping screw and washer assemblies with plain washers, ISO 1479 R, short sign S1 |
| ISO 10510 C-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 C-H, short sign S2 |
| ISO 10510 F-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 F-H, short sign S2 |
| ISO 10510 R-H-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 R-H, short sign S2 |
| ISO 10510 C-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 C-Z, short sign S2 |
| ISO 10510 F-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 F-Z, short sign S2 |
| ISO 10510 R-Z-S2 | Tapping screw and washer assemblies with plain washers, ISO 7049 R-Z, short sign S2 |
| ISO 10510 C-S3 | Tapping screw and washer assemblies with plain washers, ISO 1481 C, short sign S3 |
| ISO 10510 F-S3 | Tapping screw and washer assemblies with plain washers, ISO 1481 F, short sign S3 |
| ISO 4017 | Hexagon bolts with thread to the head |
| ISO 4014 | Hexagon head bolts with shank, product groups A and B |
| ISO 4018 | Hexagon head screws with thread until head |
| ISO 8676 | Hexagon bolts with thread to the head, metric fine thread |
| ISO 8765 | Hexagon head bolts with shank, metric fine thread |
| ISO 4016 | Hexagon head bolts with shank |
| ISO 15071 | Hexagon bolts with flange, small series |
| ISO 15072 | Hexagon bolts with flange with metric fine pitch thread - Small series - Product grade A |
| ISO 4015 | Hexagon head bolts, reduced shank |
| ISO 4162 | Hexagon bolts with flange, small series |
| ISO 7046-1 H | Countersunk flat head screws (common head style) with type H cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
| ISO 2009 | Slotted countersunk flat head screws, product grade A |
| ISO 2010 | Slotted raised countersunk head screws (common head style) – product grade A |
| ISO 7046-1 Z | Countersunk flat head screws (common head style) with type Z cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
| ISO 7046-2 H1 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
| ISO 7046-2 H2 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
| ISO 7046-2 Z1 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
| ISO 7046-2 Z2 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
| ISO 7047 H | Slotted raised countersunk raised head screws (common head style) with type H cross recess, product grade A |
| ISO 7047 Z | Slotted raised countersunk raised head screws (common head style) with type Z cross recess, product grade A |
| ISO 10642 | Hexagon socket countersunk head screws with reduced loadability |
| ISO 7380-1 | Button head screws - Part 1: Hexagon socket button head screws |
| ISO 3266 | Eye bolts |
| ISO 7379 | Hexagon socket head shoulder screw |
| ISO 7380-2 | Button head screws - Part 2: Hexagon socket button head screws with collar |
| ISO 8678 | Cup head square neck bolts with small head and short neck |
| ISO 14580 | Hexalobular socket cheese head screws, low head |
| ISO 14583 | Hexalobular socket pan head screws |
| ISO 14579 | Hexalobular socket head cap screws |
| ISO 14584 | Hexalobular socket raised countersunk head screws |
| ISO 14581 | Counter sunk screws with torx |
| ISO 14582 | Hexalobular socket countersunk head screws, high head |
| ISO 14585 C | Hexalobular socket pan head tapping screws |
| ISO 14585 F | Hexalobular socket pan head tapping screws |
| ISO 14585 R | Hexalobular socket pan head tapping screws |
| ISO 14586 C | Hexalobular socket countersunk head tapping screws |
| ISO 14586 F | Hexalobular socket countersunk head tapping screws |
| ISO 14586 R | Hexalobular socket countersunk head tapping screws |
| ISO 14587 C | Hexalobular socket raised countersunk (oval) head tapping screws |
| ISO 14587 F | Hexalobular socket raised countersunk (oval) head tapping screws |
| ISO 14587 R | Hexalobular socket raised countersunk (oval) head tapping screws |
| ISO 4762 | Hexagon socket head cap screws |
| ISO 1207 | Slotted cheese head screws, product grade A |
| ISO 1580 | Slotted pan head screws, product grade A |
| ISO 7045 H | Pan head screws with cross recess, form H – product grade A |
| ISO 7045 Z | Pan head screws with cross recess, form Z – product grade A |
| ISO 7048 H | Cross recessed cheese head screws, form H |
| ISO 7048 Z | Cross recessed cheese head screws, form Z |
| ISO 21269 | Hexalobular socket head cap screws with fine pitch thread |
| ISO 12474 | Hexalobular socket head cap screws with fine pitch thread |
| ISO 10242-2 C | Punch holder shanks, form C |
| ISO 9183-1 A | Wear plates for press dies, type A |
| ISO 8740 | Cylindrical grooved pins with chamfer |
| ISO 8745 | Grooved pins, half length taper grooved |
| ISO 8739 | Grooved pins, full-length parallel growed, with pilot |
| ISO 8741 | Grooved pins, half length reverse grooved |
| ISO 8742 | Grooved pins, 1/3 growed, with pilot |
| ISO 8744 | Grooved pins, full-lenght parallel growed |
| ISO 8746 A | Grooved pins with round head, form A |
| ISO 8746 B | Grooved pins with round head, form B |
| ISO 8743 | Grooved pins - Half-length centre grooved |
| ISO 8747 A | Grooved pins with countersunk head, form A |
| ISO 8747 B | Grooved pins with countersunk head, form B |
| ISO 15973 | Closed end blind rivets with break pull mandrel and protruding head AIA/St |
| ISO 15974 | Closed end blind rivets with break pull mandrel and countersunk head AIA/St |
| ISO 15975 | Closed end blind rivets with break pull mandrel and protruding head AI/AIA |
| ISO 15976 | Closed end blind rivets with break pull mandrel and protruding head St/St |
| ISO 15977 | Open end blind rivets with break pull mandrel and protruding head AIA/St |
| ISO 15978 | Open end blind rivets with break pull mandrel and countersunk head AIA/St |
| ISO 15979 | Open end blind rivets with break pull mandrel and protruding head St/St |
| ISO 15980 | Open end blind rivets with break pull mandrel and countersunk head St/St |
| ISO 15981 | Open end blind rivets with break pull mandrel and protruding head AIA/AIA |
| ISO 15982 | Open end blind rivets with break pull mandrel and countersunk head AIA/AIA |
| ISO 15983 | Open end blind rivets with break pull mandrel and protruding head A2/A2 |
| ISO 15984 | Open end blind rivets with break pull mandrel and countersunk head A2/A2 |
| ISO 16582 | Open end blind rivets with break pull mandrel and protruding head. Cu/St, Cu/Br or Cu/SSt |
| ISO 16583 | Open end blind rivets with break pull mandrel and countersunk head Cu/St or Cu/Br or Cu/SSt |
| ISO 16584 | Open end blind rivets with break pull mandrel and protruding head NiCu/St or NiCu/SSt |
| ISO 16585 | Closed end blind rivets with break pull mandrel and protruding head A2/SSt |
| ISO 2338 | Parallel pins from unhardened steel and stainless steel |
| ISO 8734 | Parallel pins of hardened steel and martensitic stainless steel |
| ISO 8735 A | Parallel pins with internal thread, hardened, form A |
| ISO 8735 B | Parallel pins with internal thread, hardened, form B |
| ISO 8733 | Parallel pins, with internal thread |
| ISO 8737 | Taper pins with threaded pin |
| ISO 2339 A | Taper pins, not hardened, form A |
| ISO 2339 B | Taper pins, unhardened, form B |
| ISO 8736 A | Taper pins with inner thread, no hardened, form A |
| ISO 8736 B | Taper pins with inner thread, unhardened, form B |
| ISO 8752 | Clamping pins - slotted, heavy duty |
| ISO 13337 | Spring-type straight pins, slotted, light duty |
| ISO 8748 | Spring-type straight pins - Coiled, heavy duty |
| ISO 8750 | Spring-type straight pins - Coiled, standard duty |
| ISO 8751 | Spring-type straight pins - Coiled, light duty |
| ISO 1234 | Split pins |
| ISO 2340 A | Clevis pins without head, form A |
| ISO 2340 B | Clevis pins without head, form B |
| ISO 2341 A | Clevis pins with head, form A |
| ISO 2341 B | Clevis pins with head, form B |
| ISO 3601-4 T1 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T1 |
| ISO 3601-4 T2 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T2 |
| ISO 3601-4 T3 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T3 |
| ISO 3601-4 T4 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T4 |
| ISO 3601-4 T5 | Fluid power systems - O-rings - Part 4: Anti-extrusion rings, type T5 |
| ISO 6194-1 Type 1 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased |
| ISO 6194-1 Type 1S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Metal-cased. Single lip with protection lip |
| ISO 6194-1 Type 2 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case |
| ISO 6194-1 Type 2S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 2. Metal-cased with inner case. Single lip with protection lip |
| ISO 6194-1 Type 3 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 3. Semi-rubber-covered metal-cased |
| ISO 6194-1 Type 3S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 1. Semi-rubber-covered metal-cased. Single lip with protection lip |
| ISO 6194-1 Type 4 | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased |
| ISO 6194-1 Type 4S | Rotary shaft lip-type seals incorporating elastomeric sealing elements, type 4. Rubber-covered metal-cased. Single lip with protection lip |
| ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, middle series |
| ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, light series |
| ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, middle series |
| ISO 14 | Straight-sided splines for cylindrical shafts with internal centering, light series |
| ISO 3912 | Woodruff keys and keyways |
| ISO 4247 | Press-fitt bushes - Headed type |
| ISO 4247 | Press-fitt bushes - Headless type |
| ISO 4247 | Press-fitt liners - Headed type |
| ISO 4247 | Press-fitt liners - Headless type |
| ISO 4247 | Locking screws |
| ISO 4247 | Renewable bushes - Fixed type with or without bore for stop pin |
| ISO 4247 | Renewable bushes - Slip type with or without bore for stop pin |
| ISO 4247 | Jig bushes and accessories for drilling purposes |
| ISO 4247 | ISO 4247: Jig bushes and accessories for drilling purposes" |
| ISO 5468 | Rotary and rotary impact masonry drill bits with hardmetal tips |
| ISO 238 INCH | Extension sockets for tools with Morse taper shanks |
| ISO 238 | Extension sockets for tools with Morse taper shanks |
| ISO 238 INCH | Reduction sleeves for tools with Morse taper shanks |
| ISO 238 | Reduction sleeves for tools with Morse taper shanks |
| ISO 10102 | Double-headed open-ended engineers' wrenches |
| ISO 2725-1 A | Hand-operated sockets, form A |
| ISO 2725-1 B | Hand-operated sockets, form B |
| ISO 2725-2 | Machine-operated sockets ("impact"), rings |
| ISO 2725-2 | Machine-operated sockets ("impact"), retaining pins |
| ISO 2725-2 | Machine-operated sockets ("impact") |
| ISO 2725-3 | Machine-operated sockets ("non-impact"), rings |
| ISO 2725-3 | Machine-operated sockets ("non-impact"), retaining pin |
| ISO 2725-3 G | Machine-operated sockets ("non-impact"), form G |
| ISO 2725-3 J | Machine-operated sockets ("non-impact"), form J |
| ISO 2936 | Hexagon socket screw key |
| ISO 4231 | Hand and machine-operated circular screwing dies for parallel pipe threads, G series |
| ISO 6751 | Knockout pin with cylindricity |
| ISO 6787 A | Adjustable wrenches, open end, form A |
| ISO 6787 B | Adjustable wrenches, open end, form B |
| ISO 7738 A | Combination wrenches, form A |
| ISO 7738 B | Combination wrenches, form B |
| ISO 10889-1 | Tool holders with parallel shank |
| ISO 10889-2 A1 | Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, right angular |
| ISO 10889-2 A2 | Tool holders with cylindrical shank - Part 2: Type A, shanks for tool holders of special designs, form A1, round |
| ISO 10889-3 B1 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B1 right, short |
| ISO 10889-3 B2 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B2 left, short |
| ISO 10889-3 B3 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, right, short |
| ISO 10889-3 B4 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B3 overhead, left, short |
| ISO 10889-3 B5 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B5 right, long |
| ISO 10889-3 B6 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 left, long |
| ISO 10889-3 B7 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B7 overhead, right, long |
| ISO 10889-3 B8 | Tool holders with cylindrical shank - Part 3: Type B with square cross seat, form B6 overhead, left, long |
| ISO 10889-4 C1 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C1, right |
| ISO 10889-4 C2 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C2, left |
| ISO 10889-4 C3 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C3, overhead, right |
| ISO 10889-4 C4 | Tool holders with cylindrical shank - Part 4: Type C with rectangular axial seat, form C4, overhead, left |
| ISO 10889-5 D1 | Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D1 |
| ISO 10889-5 D2 | Tool holders with cylindrical shank - Part 5: Type D with more than one rectangular seat, form D2 |
| ISO 10889-6 E1 | Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E1 for drilling tools with internal coolant feed |
| ISO 10889-6 E2 | Tool holders with cylindrical shank - Part 6: Type E with cylindrical seat, form E2 for turning tools with cylindrical |
| ISO 10889-8 Z1 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z1, clamping rings |
| ISO 10889-8 Z2 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z2, blanking plugs |
| ISO 10889-8 Z3 | Tool holders with cylindrical shank - Part 8: Type Z, accessories, form Z3, ball nozzles |
| ISO 13918 FD | Studs and ceramic ferrules for arc stud welding, form FD |
| ISO 13918 MD | Studs with reduce shaft for arc welding, form MD |
| ISO 13918 PD | Studs for arc welding, form PD |
| ISO 13918 RD | Studs with reduce shaft for arc welding, form RD |
| ISO 13918 UD | Studs for arc stud welding, form UD |
| ISO 13918 ND | Insulation pins/nails, form ND |
| ISO 13918 ID | Studs with internal thread for arc stud welding, form ID |
| ISO 13918 SD1 | Shear connectors for arc welding, form SD1 |
| ISO 13918 SD2 | Shear connectors for arc welding, form SD2 |
| ISO 13918 SD3 | Shear connectors for arc welding, form SD3 |
| ISO 13918 PS | Studs and ceramic ferrules for arc stud welding, form PS |
| ISO 13918 US | Studs for arc stud welding, form US |
| ISO 13918 IS | Studs with internal thread for arc stud welding, form IS |
| ISO 13918 PT | Studs for arc welding, form PT |
| ISO 13918 UT | Studs for arc stud welding, form UT |
| ISO 13918 IT | Studs with internal thread for arc stud welding, form IT |
| ISO 13918 UF | Ceramic rings for pins and head bolts, form UF |
| ISO 13918 MF | Ceramic rings for pins and head bolts, form MF |
| ISO 13918 PF | Ceramic rings for stud bolts, form PF |
| ISO 13918 RF | Ceramic rings for studs with reduced shank, form RF |
| ISO 13918 DF | Ceramic rings for studs with reduced shank, form DF |
| ISO 8139 | Rod end spherical eyes |
| ISO 8140 | Rod end clevises |
| IS0 487 S | Steel roller chains, type S |
| ISO 487 C | Steel roller chains, type C |
| ISO 487 C F1 | Steel roller chains, type C, F1 attachment plates |
| ISO 487 C F4 | Steel roller chains, type C, F4 attachment plates |
| ISO 487 S F4 | Steel roller chains, type S, F4 attachment plates |
| ISO 487 S K1 | Steel roller chains, type S, K1 attachment plates |
| ISO 487 C K1 | Steel roller chains, type C, K1 attachment plates |
| ISO 487 S M1 | Steel roller chains, type S, M1 attachment plates |
| ISO 487 | Chain wheels for steel roller chains type S and C |
| ISO 606 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| ISO 3601-1 | O-rings |
| ISO 3601-2 | O-rings - Housings |
| ISO 3601-3 | O-Rings |
| ISO 10673 L | Plain washers for screw and washer assemblies, form L |
| ISO 10673 N | Plain washers for screw and washer assemblies, form N |
| ISO 10673 S | Plain washers for screw and washer assemblies, form S |
| ISO 7089 | Plain washers, normal series, product grade A |
| ISO 7092 | Plain washers, small series, product grade A |
| ISO 7090 | Plain washers, chamfered, normal series, product grade A |
| ISO 7091 | Plain washers, normal series, product grade C |
| ISO 7093-1 | Plain washers, large series, product grade A |
| ISO 7093-2 | Plain washers, large series, product grade C |
| ISO 7094 | Plain washers, extra large series, product grade C |
| ISO 10669 L | Plain washers for tapping screw and washer assemblies, form L |
| ISO 10669 N | Plain washers for tapping screw and washer assemblies, form N |
| ISO 8738 | Washers for studs, finish coarse |
| ISO 887 | Plain washers for metric bolts, screws and nuts for general purposes |
| ISO 7010 E001 | Safe combination signs, emergency exit (left hand), form E001 |
| ISO 7010 E002 | Safe combination signs, emergency exit (right hand), form E002 |
| ISO 7010 E003 | Safe combination signs, first aid, form E003 |
| ISO 7010 E004 | Safe combination signs, emergency telephone, form E004 |
| ISO 7010 E005 | Safe combination signs, direction, arrow (90° increments), safe condition, form E005 |
| ISO 7010 E006 | Safe combination signs, direction, 45° arrow (90° increments), safe condition, form E006 |
| ISO 7010 E007 | Safe combination signs, evacuation assembly point, form E007 |
| ISO 7010 E008 | Safe combination signs, break obtain access, form E008 |
| ISO 7010 E009 | Safe combination signs, doctor, form E009 |
| ISO 7010 E010 | Safe combination signs, automated external defibrillator (AED), form E010 |
| ISO 7010 E011 | Safe combination signs, eyewash station, form E011 |
| ISO 7010 E012 | Safe combination signs, safety shower, form E012 |
| ISO 7010 E013 | Safe combination signs, stretcher, form E013 |
| ISO 7010 E014 | Sicherheitskennzeichnung,Erkennungssystem für das_x000D_ Vorhandensein und die Orientierung_x000D_ eines Kindersitzes (en: CPOD), Form E014 |
| ISO 7010 E015 | Safe combination signs, drinking water, form E015 |
| ISO 7010 E016 | Safe combination signs, emergency exit with escape ladder, form E016 |
| ISO 7010 E017 | Safe combination signs, rescue window, form E017 |
| ISO 7010 E018 | Safe combination signs, turn anticlockwise to open, form E018 |
| ISO 7010 E019 | Safe combination signs, turn clockwise to open, form E019 |
| ISO 7010 E020 | Safe combination signs, emergency stop button, form E020 |
| ISO 7010 E021 | Safe combination signs, protection shelter, form E021 |
| ISO 7010 E022 | Safe combination signs, door opens by pushing on the left-hand side, form E022 |
| ISO 7010 E023 | Safe combination signs, door opens by pushing on the right-hand side, form E023 |
| ISO 7010 E024 | Safe combination signs, evacuation temporary refuge, form E024 |
| ISO 7010 E025 | Safe combination signs, emergency hammer, form E025 |
| ISO 7010 E026 | Safe combination signs, emergency exit for people unable to walk or with walking impairment (left), form E026 |
| ISO 7010 E027 | Safe combination signs, medical grab bag, form E027 |
| ISO 7010 E028 | Safe combination signs, oxygen resuscitator, form E028 |
| ISO 7010 E029 | Safe combination signs, emergency escape breathing device, form E029 |
| ISO 7010 E030 | Safe combination signs, emergency exit for people unable to walk or with walking impairment (right), form E030 |
| ISO 7010 E031 | Safe combination signs, shipboard general alarm, form E031 |
| ISO 7010 E032 | Safe combination signs, shipboard assembly station, form E032 |
| ISO 7010 E033 | Safe combination signs, door slides right to open, form E033 |
| ISO 7010 E034 | Safe combination signs, door slides left to open, form E034 |
| ISO 7010 E035 | Safe combination signs, liferaft knife, form E035 |
| ISO 7010 E036 | Safe combination signs, lifeboat, form E036 |
| ISO 7010 E037 | Safe combination signs, rescue boat, form E037 |
| ISO 7010 E038 | Safe combination signs, liferaft, form E038 |
| ISO 7010 E039 | Safe combination signs, Davit-launched liferaft, form E039 |
| ISO 7010 E040 | Safe combination signs, lifebuoy, form E040 |
| ISO 7010 E041 | Safe combination signs, lifebuoy with line, form E041 |
| ISO 7010 E042 | Safe combination signs, lifebuoy with light, form E042 |
| ISO 7010 E043 | Safe combination signs, lifebuoy with line and light, form E043 |
| ISO 7010 E044 | Safe combination signs, lifejacket, form E044 |
| ISO 7010 E045 | Safe combination signs, child's lifejacket, form E045 |
| ISO 7010 E046 | Safe combination signs, Infant's lifejacket, form E046 |
| ISO 7010 E047 | Safe combination signs, search and rescue transponder, form E047 |
| ISO 7010 E048 | Safe combination signs, survival craft distress signal, form E048 |
| ISO 7010 E049 | Safe combination signs, rocket parachute flare, form E049 |
| ISO 7010 E050 | Safe combination signs, line-throwing appliance, form E050 |
| ISO 7010 E051 | Sicherheitskennzeichnung, UKW-Sprechfunkgerät_x000D_ (Senden/Empfangen), tragbar, Form E051 |
| ISO 7010 E052 | Safe combination signs, emergency position indicating radio beacon, form E052 |
| ISO 7010 E053 | Safe combination signs, embarkation ladder, form E053 |
| ISO 7010 E054 | Safe combination signs, marine evacuation slide, form E054 |
| ISO 7010 E055 | Safe combination signs, marine evacuation chute, form E055 |
| ISO 7010 E056 | Safe combination signs, survival clothing, form E056 |
| ISO 7010 E057 | Safe combination signs, door opens by pulling on the left‑hand side, form E057 |
| ISO 7010 E058 | Safe combination signs, door opens by pulling on the right‑hand side, form E058 |
| ISO 7010 E059 | Safe combination signs, escape ladder, form E059 |
| ISO 7010 E060 | Safe combination signs, evacuation chair, form E060 |
| ISO 7010 E061 | Safe combination signs, water life-saving equipment, form E061 |
| ISO 7010 E062 | Safe combination signs, tsunami evacuation area, form E062 |
| ISO 7010 E063 | Safe combination signs, tsunami evacuation building, form E063 |
| ISO 7010 F001 | Fire equipment signs, fire extinguisher, form F001 |
| ISO 7010 F002 | Fire equipment signs, fire hose reel, form F002 |
| ISO 7010 F003 | Fire equipment signs, fire ladder, form F003 |
| ISO 7010 F004 | Fire equipment signs, collection of firefighting equipment, form F004 |
| ISO 7010 F005 | Fire equipment signs, fire alarm call point, form F005 |
| ISO 7010 F006 | Fire equipment signs, fire emergency telephone, form F006 |
| ISO 7010 F007 | Fire equipment signs, fire protection door, form F007 |
| ISO 7010 F008 | Fire equipment signs, fixed fire extinguishing battery, form F008 |
| ISO 7010 F009 | Fire equipment signs, wheeled fire extinguisher, form F009 |
| ISO 7010 F010 | Fire equipment signs, portable foam applicator unit, form F010 |
| ISO 7010 F011 | Fire equipment signs, water fog applicator, form F011 |
| ISO 7010 F012 | Fire equipment signs, fixed fire extinguishing installation, form F012 |
| ISO 7010 F013 | Fire equipment signs, fixed fire extinguishing bottle, form F013 |
| ISO 7010 F014 | Fire equipment signs, remote release station, form F014 |
| ISO 7010 F015 | Fire equipment signs, fire monitor, form F015 |
| ISO 7010 F016 | Fire equipment signs, fire blanket, form F016 |
| ISO 7010 M001 | Mandatory action signs, general mandatory action sign, form M001 |
| ISO 7010 M002 | Mandatory action signs, refer to instruction manual/booklet, form M002 |
| ISO 7010 M003 | Mandatory action signs, wear ear protection, form M003 |
| ISO 7010 M004 | Mandatory action signs, wear eye protection, form M004 |
| ISO 7010 M005 | Mandatory action signs, connect an earth terminal to the ground, form M005 |
| ISO 7010 M006 | Mandatory action signs, disconnect mains plug from electrical outlet, form M006 |
| ISO 7010 M007 | Mandatory action signs, opaque eye protection must be worn, form M007 |
| ISO 7010 M008 | Mandatory action signs, wear safety footwear, form M008 |
| ISO 7010 M009 | Mandatory action signs, wear protective gloves, form M009 |
| ISO 7010 M00X | Mandatory action signs, lift point, form M00X |
| ISO 7010 M010 | Mandatory action signs, wear protective clothing, form M010 |
| ISO 7010 M011 | Mandatory action signs, wash your hands, form M011 |
| ISO 7010 M012 | Mandatory action signs, use handrail, form M012 |
| ISO 7010 M013 | Mandatory action signs, wear a face shield, form M013 |
| ISO 7010 M014 | Mandatory action signs, wear head protection, form M014 |
| ISO 7010 M015 | Mandatory action signs, wear high-visibility clothing, form M015 |
| ISO 7010 M016 | Mandatory action signs, wear a mask, form M016 |
| ISO 7010 M017 | Mandatory action signs, wear respiratory protection, form M017 |
| ISO 7010 M018 | Mandatory action signs, wear a safety harness, form M018 |
| ISO 7010 M019 | Mandatory action signs, wear a welding mask, form M019 |
| ISO 7010 M020 | Mandatory action signs, wear safety belts, form M020 |
| ISO 7010 M021 | Mandatory action signs, disconnect before carrying out maintenance or repair, form M021 |
| ISO 7010 M022 | Mandatory action signs, use barrier cream, form M022 |
| ISO 7010 M023 | Mandatory action signs, use footbridge, form M023 |
| ISO 7010 M024 | Mandatory action signs, use this walkway, form M024 |
| ISO 7010 M025 | Mandatory action signs, protect infant's eyes with opaque eye protection, form M025 |
| ISO 7010 M026 | Mandatory action signs, use protective apron, form M026 |
| ISO 7010 M027 | Mandatory action signs, check guard, form M027 |
| ISO 7010 M028 | Mandatory action signs, keep locked, form M028 |
| ISO 7010 M029 | Mandatory action signs, sound horn, form M029 |
| ISO 7010 M030 | Mandatory action signs, use litter bin, form M030 |
| ISO 7010 M031 | Mandatory action signs, use table saw adjustable guard, form M031 |
| ISO 7010 M032 | Mandatory action signs, wear anti-static footwear, form M032 |
| ISO 7010 M033 | Mandatory action signs, close safety bar of chairlift, form M033 |
| ISO 7010 M034 | Mandatory action signs, open safety bar of chairlift, form M034 |
| ISO 7010 M035 | Mandatory action signs, immediately leave the tow-track in the event of falling, form M035 |
| ISO 7010 M036 | Mandatory action signs, lift ski tips, form M036 |
| ISO 7010 M037 | Mandatory action signs, close and secure hatches in launch sequence, form M037 |
| ISO 7010 M038 | Mandatory action signs, start engine in launch sequence, form M038 |
| ISO 7010 M039 | Mandatory action signs, lower lifeboat to the water in launch sequence, form M039 |
| ISO 7010 M040 | Mandatory action signs, lower liferaft to the water in launch sequence, form M040 |
| ISO 7010 M041 | Mandatory action signs, lower rescue boat to the water in launch sequence, form M041 |
| ISO 7010 M042 | Mandatory action signs, release falls in launch sequence, form M042 |
| ISO 7010 M043 | Mandatory action signs, start water spray in launch sequence, form M043 |
| ISO 7010 M044 | Mandatory action signs, start air supply in launch sequence, form M044 |
| ISO 7010 M045 | Mandatory action signs, release lifeboat gripes in launch sequence, form M045 |
| ISO 7010 M046 | Mandatory action signs, secure gas cylinders, form M046 |
| ISO 7010 M047 | Mandatory action signs, use self-contained breathing appliance, form M047 |
| ISO 7010 M048 | Mandatory action signs, use gas detector, form M048 |
| ISO 7010 M049 | Mandatory action signs, wear protective roller sport equipment, form M049 |
| ISO 7010 M050 | Mandatory action signs, alighting from toboggan to the left, form M050 |
| ISO 7010 M051 | Mandatory action signs, alighting from toboggan to the right, form M051 |
| ISO 7010 M052 | Mandatory action signs, keep distance between toboggans, form M052 |
| ISO 7010 M053 | Mandatory action signs, wear personal flotation device, form M053 |
| ISO 7010 M054 | Mandatory action signs, keep children under supervision in the aquatic environment, form M054 |
| ISO 7010 P001 | Prohibition signs, general prohibition sign, form P001 |
| ISO 7010 P002 | Prohibition signs, no smoking, form P002 |
| ISO 7010 P003 | Prohibition signs, no open flame; Fire, open ignition source and smoking prohibited, form P003 |
| ISO 7010 P004 | Prohibition signs, no thoroughfare, form P004 |
| ISO 7010 P005 | Prohibition signs, not drinking water, form P005 |
| ISO 7010 P006 | Prohibition signs, no access for forklift trucks and other industrial vehicles, form P006 |
| ISO 7010 P007 | Prohibition signs, no access for people with active implanted cardiac devices, form P007 |
| ISO 7010 P008 | Prohibition signs, no metallic articles or watches, form P008 |
| ISO 7010 P009 | Prohibition signs, no climbing, form P009 |
| ISO 7010 P010 | Prohibition signs, do not touch, form P010 |
| ISO 7010 P011 | Prohibition signs, do not extinguish with water, form P011 |
| ISO 7010 P012 | Prohibition signs, no heavy load, form P012 |
| ISO 7010 P013 | Prohibition signs, no activated mobile phone, form P013 |
| ISO 7010 P014 | Prohibition signs, no access for people with metallic implants, form P014 |
| ISO 7010 P015 | Prohibition signs, no reaching in, form P015 |
| ISO 7010 P016 | Prohibition signs, do not spray with water, form P016 |
| ISO 7010 P017 | Prohibition signs, no pushing, form P017 |
| ISO 7010 P018 | Prohibition signs, no sitting, form P018 |
| ISO 7010 P019 | Prohibition signs, no stepping on surface, form P019 |
| ISO 7010 P020 | Prohibition signs, do not use lift in the event of fire, form P020 |
| ISO 7010 P021 | Prohibition signs, no dogs, form P021 |
| ISO 7010 P022 | Prohibition signs, no eating or drinking, form P022 |
| ISO 7010 P023 | Prohibition signs, do not obstruct, form P023 |
| ISO 7010 P024 | Prohibition signs, do not walk or stand here, form P024 |
| ISO 7010 P025 | Prohibition signs, do not use this incomplete scaffold, form P025 |
| ISO 7010 P026 | Prohibition signs, do not use this device in a bathtub, shower or water-filled reservoir, form P026 |
| ISO 7010 P027 | Prohibition signs, do not use this lift for people, form P027 |
| ISO 7010 P028 | Prohibition signs, do not wear gloves, form P028 |
| ISO 7010 P029 | Prohibition signs, no photography, form P029 |
| ISO 7010 P030 | Prohibition signs, do not tie knots in rope, form P030 |
| ISO 7010 P031 | Prohibition signs, do not alter the state of the switch, form P031 |
| ISO 7010 P032 | Prohibition signs, do not use for face grinding, form P032 |
| ISO 7010 P033 | Prohibition signs, do not use for wet grinding, form P033 |
| ISO 7010 P034 | Prohibition signs, not for people in the state intoxication, form P043 |
| ISO 7010 P035 | Prohibition signs, do not wear metal-studded footwear, form P035 |
| ISO 7010 P036 | Prohibition signs, no children allowed, form P036 |
| ISO 7010 P037 | Prohibition signs, do not leave the tow-track, form P037 |
| ISO 7010 P038 | Prohibition signs, do not swing the chair, form P038 |
| ISO 7010 P039 | Prohibition signs, hot works prohibited, form P039 |
| ISO 7010 P040 | Prohibition signs, do not set off fireworks, form P040 |
| ISO 7010 P041 | Prohibition signs, no leaning against, form P041 |
| ISO 7010 P042 | Prohibition signs, for pregnant women forbidden, form P042 |
| ISO 7010 P043 | Prohibition signs, not for people in the state intoxication, form P043 |
| ISO 7010 P044 | Prohibition signs, use of smart glasses prohibited, form P044 |
| ISO 7010 P045 | Prohibition signs, no campfires, form P045 |
| ISO 7010 P046 | Prohibition signs, do not stretch out of toboggan, form P046 |
| ISO 7010 P047 | Prohibition signs, do not ram into toboggans, form P047 |
| ISO 7010 P048 | Prohibition signs, no running, form P048 |
| ISO 7010 P049 | Prohibition signs, no swimming, form P049 |
| ISO 7010 P050 | Prohibition signs, no snorkelling, form P050 |
| ISO 7010 P051 | Prohibition signs, no sub-aque diving, form P051 |
| ISO 7010 P052 | Prohibition signs, no diving, form P052 |
| ISO 7010 P053 | Prohibition signs, no sailing, form P053 |
| ISO 7010 P054 | Prohibition signs, no windsurfing, form P054 |
| ISO 7010 P055 | Prohibition signs, no manually powered craft, form P055 |
| ISO 7010 P056 | Prohibition signs, no mechanically powered craft, form P056 |
| ISO 7010 P057 | Prohibition signs, no personal water craft, form P057 |
| ISO 7010 P058 | Prohibition signs, no towed water activity, form P058 |
| ISO 7010 P059 | Prohibition signs, no surf craft, form P059 |
| ISO 7010 P060 | Prohibition signs, no outdoor footwear, form P060 |
| ISO 7010 P061 | Prohibition signs, no jumping into water, form P061 |
| ISO 7010 P062 | Prohibition signs, no pushing into water, form P062 |
| ISO 7010 P063 | Prohibition signs, no body boarding, form P063 |
| ISO 7010 P064 | Prohibition signs, no surfing between the red-and-yellow flags, form P064 |
| ISO 7010 P065 | Prohibition signs, no kite surfing, form P065 |
| ISO 7010 P066 | Prohibition signs, no parasailing, form P066 |
| ISO 7010 P067 | Prohibition signs, no sand yachting, form P067 |
| ISO 7010 P068 | Prohibition signs, do not expose to direct sunlight or hot surface, form P068 |
| ISO 7010 P069 | Prohibition signs, not to be serviced by users, form P069 |
| ISO 7010 P070 | Prohibition signs, do not put finger into the nozzle of a hydromassage, form P070 |
| ISO 7010 P071 | Prohibition signs, do not exceed barrier, form P071 |
| ISO 7010 P072 | Prohibition signs, no jumping down, form P072 |
| ISO 7010 W001 | Warning signs, general warning sign, form W001 |
| ISO 7010 W002 | Warning signs, warning; Explosive materials, form W002 |
| ISO 7010 W003 | Warning signs, warning; Radioactive smaterial or ionizing radiation, form W003 |
| ISO 7010 W004 | Warning signs, warning; Laser beam, form W004 |
| ISO 7010 W005 | Warning signs, warning; Non-ionizing radiation, form W005 |
| ISO 7010 W006 | Warning signs, warning; Magnetic field, form W006 |
| ISO 7010 W007 | Warning signs, warning; Floor-level obstacle, form W007 |
| ISO 7010 W008 | Warning signs, warning; Drop (fall), form W008 |
| ISO 7010 W009 | Warning signs, warning; Biological hazard, form W009 |
| ISO 7010 W010 | Warning signs, warning; Low temperature / freezing conditions, form W010 |
| ISO 7010 W011 | Warning signs, warning; Slippery surface, form W011 |
| ISO 7010 W012 | Warning signs, warning; Electricity, form W012 |
| ISO 7010 W013 | Warning signs, warning; Guard dog, form W013 |
| ISO 7010 W014 | Warning signs, warning; Forklift trucks and other industrial vehicles, form W014 |
| ISO 7010 W015 | Warning signs, warning; Overhead load, form W015 |
| ISO 7010 W016 | Warning signs, warning; Toxic material, form W016 |
| ISO 7010 W017 | Warning signs, warning; Hot surface, form W017 |
| ISO 7010 W018 | Warning signs, warning; Automatic start-up, form W018 |
| ISO 7010 W019 | Warning signs, warning; Crushing, form W019 |
| ISO 7010 W020 | Warning signs, warning; Overhead obstacle, form W020 |
| ISO 7010 W021 | Warning signs, warning; Flammable material, form W021 |
| ISO 7010 W022 | Warning signs, warning; Sharp element, form W022 |
| ISO 7010 W023 | Warning signs, warning; Corrosive substance, form W023 |
| ISO 7010 W024 | Warning signs, warning; Crushing of hands, form W024 |
| ISO 7010 W025 | Warning signs, warning; Counterrotating rollers, form W025 |
| ISO 7010 W026 | Warning signs, warning; Battery charging, form W026 |
| ISO 7010 W027 | Warning signs, warning; Optical radiation, form W027 |
| ISO 7010 W028 | Warning signs, warning; Oxidizing substance, form W028 |
| ISO 7010 W029 | Warning signs, warning; Pressurized cylinder, form W029 |
| ISO 7010 W030 | Warning signs, warning; Hand crushing between press brake tool, form W030 |
| ISO 7010 W031 | Warning signs, warning; Hand crushing between press brake and material, form W031 |
| ISO 7010 W032 | Warning signs, warning; Rapid movement of workpiece in press brake, form W032 |
| ISO 7010 W033 | Warning signs, warning; Barbed wire, form W033 |
| ISO 7010 W034 | Warning signs, warning; Bull, form W034 |
| ISO 7010 W035 | Warning signs, warning; Falling objects, form W035 |
| ISO 7010 W036 | Warning signs, warning; Fragile roof, form W036 |
| ISO 7010 W037 | Warning signs, warning; Run over by remote operator-controlled machine, form W037 |
| ISO 7010 W038 | Warning signs, warning; Sudden loud noise, form W038 |
| ISO 7010 W039 | Warning signs, warning; Falling ice, form W039 |
| ISO 7010 W040 | Warning signs, warning; Roof avalanche, form W040 |
| ISO 7010 W041 | Warning signs, warning; Asphyxiating atmosphere, form W041 |
| ISO 7010 W042 | Warning signs, warning; Arc flash, form W042 |
| ISO 7010 W043 | Warning signs, warning; Thin ice, form W043 |
| ISO 7010 W044 | Warning signs, warning; Slipway, form W044 |
| ISO 7010 W045 | Warning signs, warning; Towed water activity area, form W045 |
| ISO 7010 W046 | Warning signs, warning; Surf craft area, form W046 |
| ISO 7010 W047 | Warning signs, warning; Deep water, form W047 |
| ISO 7010 W048 | Warning signs, warning; Shallow water (diving), form W048 |
| ISO 7010 W049 | Warning signs, warning; Submerged objects, form W049 |
| ISO 7010 W050 | Warning signs, warning; Sudden drop in swimming or leisure pools, form W050 |
| ISO 7010 W051 | Warning signs, warning; Unprotected edge, form W051 |
| ISO 7010 W052 | Warning signs, warning; Unstable cliff edge, form W052 |
| ISO 7010 W053 | Warning signs, warning; Unstable cliff, form W053 |
| ISO 7010 W054 | Warning signs, warning; Shark, form W054 |
| ISO 7010 W055 | Warning signs, warning; Sewage effluent outfall, form W055 |
| ISO 7010 W056 | Warning signs, warning; Tsunami hazard zone, form W056 |
| ISO 7010 W057 | Warning signs, warning; Strong currents, form W057 |
| ISO 7010 W058 | Warning signs, warning; Boating area, form W058 |
| ISO 7010 W059 | Warning signs, warning; Sand yachting, form W059 |
| ISO 7010 W060 | Warning signs, warning; Incoming tides, form W060 |
| ISO 7010 W061 | Warning signs, warning; Quicksand or mud/deep mud or silt, form W061 |
| ISO 7010 W062 | Warning signs, warning; Kite surfing, form W062 |
| ISO 7010 W063 | Warning signs, warning; Parasailing, form W063 |
| ISO 7010 W064 | Warning signs, warning; Strong winds, form W064 |
| ISO 7010 W065 | Warning signs, warning; High surf or large breaking waves, form W065 |
| ISO 7010 W066 | Warning signs, warning; Deep shelving beach, form W066 |
| ISO 7010 W067 | Warning signs, warning; Crocodiles, alligators or caymans, form W067 |
| ISO 7010 W068 | Warning signs, warning of falling into water when entering or leaving a floating surface, form W068 |
| ISO 7010 W069 | Warning signs, warning of jellyfish, form W069 |
| ISO 7010 W070 | Warning signs, warning of stepping down, form W070 |
| ISO 11684 A.2.1 | Safety signs and hazard pictorials; Caustic liquids - Chemical burns to fingers or hand, Form A.2.1 |
| ISO 11684 A.2.2 | Safety signs and hazard pictorials; Pouisonous turnes or toxix gases - Asphyxiation, Form A.2.2 |
| ISO 11684 A.3.1 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.1 |
| ISO 11684 A.3.2 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.2 |
| ISO 11684 A.3.3 | Safety signs and hazard pictorials; Electrical shock/electrocution, Form A.3.3 |
| ISO 11684 A.3.4 | Safety signs and hazard pictorials; Electrical shock/electrocution - Row marker, Form A.3.4 |
| ISO 11684 A.3.5 | Safety signs and hazard pictorials; Electrical shock/electrocution - High clearance sprayer, Form A.3.5 |
| ISO 11684 A.3.6 | Safety signs and hazard pictorials; Electrical shock/electrocution - Cotton harvester, Form A.3.6 |
| ISO 11684 A.3.7 | Safety signs and hazard pictorials; Electrical shock/electrocution - Loader, Form A.3.7 |
| ISO 11684 A.3.8 | Safety signs and hazard pictorials; Electrical shock/electrocution - Combine unloader auger, Form A.3.8 |
| ISO 11684 A.4.1 | Safety signs and hazard pictorials; Falling from high place, Form A.4.1 |
| ISO 11684 A.4.2 | Safety signs and hazard pictorials; Falling into machinery - Auger, Form A.4.2 |
| ISO 11684 A.4.3 | Safety signs and hazard pictorials; Falling into machinery - Sharp edges, Form A.4.3 |
| ISO 11684 A.4.4 | Safety signs and hazard pictorials; Falling into machinery - Rotating gears, Form A.4.4 |
| ISO 11684 A.4.5 | Safety signs and hazard pictorials; Falling into machinery - Rollers, Form A.4.5 |
| ISO 11684 A.4.6 | Safety signs and hazard pictorials; Falling or slipping on wet area, Form A.4.6 |
| ISO 11684 A.4.7 | Safety signs and hazard pictorials; Falling from raised loader bucket, Form A.4.7 |
| ISO 11684 A.5.1 | Safety signs and hazard pictorials; High pressure fluid - Injection into body, Form A.5.1 |
| ISO 11684 A.5.2 | Safety signs and hazard pictorials; High pressure spray - Erosion of flesh, Form A.5.2 |
| ISO 11684 A.6.1 | Safety signs and hazard pictorials; Crushing of fingers or hand - Force applied from above, Form A.6.1 |
| ISO 11684 A.6.2 | Safety signs and hazard pictorials; Crushing of toes or foot - Force applied from above, Form A.6.2 |
| ISO 11684 A.6.3 | Safety signs and hazard pictorials; Crushing of whole body - Force applied from above, Form A.6.3 |
| ISO 11684 A.6.4 | Safety signs and hazard pictorials; Crushing of torso - Force applied from above, Form A.6.4 |
| ISO 11684 A.6.5 | Safety signs and hazard pictorials; Crushing of torso - Force applied from side, Form A.6.5 |
| ISO 11684 A.6.6 | Safety signs and hazard pictorials; Crushing of fingers or hands - Force applied from side, Form A.6.6 |
| ISO 11684 A.6.7 | Safety signs and hazard pictorials; Crushing of leg - Force applied from side, Form A.6.7 |
| ISO 11684 A.6.8 | Safety signs and hazard pictorials; Crushing - Round baler gate raising, Form A.6.8 |
| ISO 11684 A.6.9 | Safety signs and hazard pictorials; Crushing - Round baler gate falling, Form A.6.9 |
| ISO 11684 A.6.10 | Safety signs and hazard pictorials; Crushing of hand and arm - Tractor blade, Form A.6.10 |
| ISO 11684 A.6.11 | Safety signs and hazard pictorials; Crushing of head, torso and arms - Spreader, Form A.6.11 |
| ISO 11684 A.6.12 | Safety signs and hazard pictorials; Crushing - Planter or grain drill wing, Form A.6.12 |
| ISO 11684 A.6.13 | Safety signs and hazard pictorials; Crushing - Marker arm, Form A.6.13 |
| ISO 11684 A.6.14 | Safety signs and hazard pictorials; Crushing - Cultivator outrigger, Form A.6.14 |
| ISO 11684 A.6.15 | Safety signs and hazard pictorials; Crushing - Rotary cutter, Form A.6.15 |
| ISO 11684 A.6.16 | Safety signs and hazard pictorials; Crushing - Runaway bale, Form A.6.16 |
| ISO 11684 A.6.17 | Safety signs and hazard pictorials; Crushing - Round baler push bar, Form A.6.17 |
| ISO 11684 A.6.18 | Safety signs and hazard pictorials; Crushing - Loader bucket, Form A.6.18 |
| ISO 11684 A.7.1 | Safety signs and hazard pictorials; Cutting of fingers or hand, Form A.7.1 |
| ISO 11684 A.7.2 | Safety signs and hazard pictorials; Cutting of foot, Form A.7.2 |
| ISO 11684 A.7.3 | Safety signs and hazard pictorials; Severing of fingers or hand - Mower blade, Form A.7.3 |
| ISO 11684 A.7.4 | Safety signs and hazard pictorials; Severing of toes or foot - Mower blade, Form A.7.4 |
| ISO 11684 A.7.5 | Safety signs and hazard pictorials; Severing of toes or fingers - Rotary mower blade, Form A.7.5 |
| ISO 11684 A.7.6 | Safety signs and hazard pictorials; Cutting or entanglement of foot, Rotating auger, Form A.7.6 |
| ISO 11684 A.7.7 | Safety signs and hazard pictorials; Cutting or entanglement of foot, Rotating auger, Form A.7.7 |
| ISO 11684 A.7.8 | Safety signs and hazard pictorials; Severing of fingers or hand - Impeller blade, Form A.7.8 |
| ISO 11684 A.7.9 | Safety signs and hazard pictorials; Dismemberment - Rear engine mower in forward motion, Form A.7.9 |
| ISO 11684 A.7.10 | Safety signs and hazard pictorials; Dismemberment - Rear engine mower in rearward motion, Form A.7.10 |
| ISO 11684 A.7.11 | Safety signs and hazard pictorials; Dismemberment - Front engine mower or lawn and garden tractor in forward motion, Form A.7.11 |
| ISO 11684 A.7.12 | Safety signs and hazard pictorials; Dismemberment - Front engine mower or lawn and garden tractor in rearward motion, Form A.7.12 |
| ISO 11684 A.7.13 | Safety signs and hazard pictorials; Severing of fingers or hand - Engine fan, Form A.7.13 |
| ISO 11684 A.7.14 | Safety signs and hazard pictorials; Puncture of hand or fingers, Form A.7.14 |
| ISO 11684 A.7.15 | Safety signs and hazard pictorials; Severing of toes or foot - Mower blade with flexible guard, Form A.7.15 |
| ISO 11684 A.7.16 | Safety signs and hazard pictorials; Cutting of leg - Trimmer, Form A.7.16 |
| ISO 11684 A.8.1 | Safety signs and hazard pictorials; Arm entanglement in machinery, Form A.8.1 |
| ISO 11684 A.8.2 | Safety signs and hazard pictorials; Leg entanglement in machinery, Form A.8.2 |
| ISO 11684 A.8.3 | Safety signs and hazard pictorials; Leg entanglement in machinery, Form A.8.3 |
| ISO 11684 A.8.4 | Safety signs and hazard pictorials; Arm entanglement - Rotating gears, Form A.8.4 |
| ISO 11684 A.8.5 | Safety signs and hazard pictorials; Fingers or hand entanglement - Rotating gears, Form A.8.5 |
| ISO 11684 A.8.6 | Safety signs and hazard pictorials; Fingers or hand entanglement - Rotating rollers, Form A.8.6 |
| ISO 11684 A.8.7 | Safety signs and hazard pictorials; Entanglement - Round baler or self-loading wagon, Form A.8.7 |
| ISO 11684 A.8.8 | Safety signs and hazard pictorials; Entanglement - Cotton picker spindles, Form A.8.8 |
| ISO 11684 A.8.9 | Safety signs and hazard pictorials; Whole body entanglement - Implement input drive line, Form A.8.9 |
| ISO 11684 A.8.10 | Safety signs and hazard pictorials; Entanglement - Combine header, Form A.8.10 |
| ISO 11684 A.8.11 | Safety signs and hazard pictorials; Arm entanglement - Feed rolls, Form A.8.11 |
| ISO 11684 A.8.12 | Safety signs and hazard pictorials; Arm or upper torso entanglement - Rotating auger, Form A.8.12 |
| ISO 11684 A.8.13 | Safety signs and hazard pictorials; Fingers or hand entanglement - Cotton stripper cleaner drive, Form A.8.13 |
| ISO 11684 A.8.14 | Safety signs and hazard pictorials; Hand and arm entanglement - Chain or toothed belt drive, Form A.8.14 |
| ISO 11684 A.8.15 | Safety signs and hazard pictorials; Arm entanglement - Post hole digger, Form A.8.15 |
| ISO 11684 A.8.16 | Safety signs and hazard pictorials; Leg entanglement - Tedder rake, Form A.8.16 |
| ISO 11684 A.8.17 | Safety signs and hazard pictorials; Arms and upper torso entanglement - Spreader beater, Form A.8.17 |
| ISO 11684 A.8.18 | Safety signs and hazard pictorials; Arm entanglement - Broom reel, Form A.8.18 |
| ISO 11684 A.8.19 | Safety signs and hazard pictorials; Hand and arm entanglement - Belt drive, Form A.8.19 |
| ISO 11684 A.8.20 | Safety signs and hazard pictorials; Entanglement - Cotton picker conveyor drive, Form A.8.20 |
| ISO 11684 A.8.21 | Safety signs and hazard pictorials; Entanglement - Crop feeder, Form A.8.21 |
| ISO 11684 A.9.1 | Safety signs and hazard pictorials; Large thrown or flying object, Form A.9.1 |
| ISO 11684 A.9.2 | Safety signs and hazard pictorials; Thrown or flying objects - Whole body exposure, Form A.9.2 |
| ISO 11684 A.9.3 | Safety signs and hazard pictorials; Thrown or flying objects - Face exposure, Form A.9.3 |
| ISO 11684 A.9.4 | Safety signs and hazard pictorials; Thrown or flying objects - Rotary cutter, Form A.9.4 |
| ISO 11684 A.9.5 | Safety signs and hazard pictorials; Thrown or flying objects - Side-mounted rotary mower, Form A.9.5 |
| ISO 11684 A.10.1 | Safety signs and hazard pictorials; Runover/backover - Tractor, Form A.10.1 |
| ISO 11684 A.11.1 | Safety signs and hazard pictorials; Machine tipping - Riding mower, Form A.11.1 |
| ISO 11684 A.11.2 | Safety signs and hazard pictorials; Machine rollover - ROPS, Form A.11.2 |
| ISO 11684 A.12.1 | Safety signs and hazard pictorials; Kickback or upward motion - Round baler wrap arm handle, Form A.12.1 |
| ISO 11684 A.13.1 | Safety signs and hazard pictorials; Hot surfaces - Burns to fingers or hands, Form A.13.1 |
| ISO 11684 A.14.1 | Safety signs and hazard pictorials; Explosion, Form A.14.1 |
| ISO 11684 A.14.2 | Safety signs and hazard pictorials; Fire or open flame, Form A.14.2 |
| ISO 11684 B.2.1 | Safety signs and hazard pictorials; Stay clear of raised boom and bucket, Form B.2.1 |
| ISO 11684 B.2.2 | Safety signs and hazard pictorials; Secure lifting cylinder with locking device before getting in hazardous area, Form B.2.2 |
| ISO 11684 B.2.3 | Safety signs and hazard pictorials; Secure lifting cylinder with locking device before getting in hazardous area, Form B.2.3 |
| ISO 11684 B.2.4 | Safety signs and hazard pictorials; Insert safety lock before getting in hazardous area, Form B.2.4 |
| ISO 11684 B.2.5 | Safety signs and hazard pictorials; Never tip trailer on soft ground or on a slope, Form B.2.5 |
| ISO 11684 B.2.6 | Safety signs and hazard pictorials; Stay a safe distance from the machine, Form B.2.6 |
| ISO 11684 B.2.7 | Safety signs and hazard pictorials; Stay clear of draft link lifting range while operating rockshaft controls, Form B.2.7 |
| ISO 11684 B.2.8 | Safety signs and hazard pictorials; Stay clear of baler gate swing area while tractor engine is running, Form B.2.8 |
| ISO 11684 B.2.9 | Safety signs and hazard pictorials; Stay clear of raised gate unless safety lock is applied, Form B.2.9 |
| ISO 11684 B.2.10 | Safety signs and hazard pictorials; Stay clear of articulation area while engine is running, Form B.2.10 |
| ISO 11684 B.2.11 | Safety signs and hazard pictorials; Do not open or remove safety shields while engine is running, Form B.2.11 |
| ISO 11684 B.2.12 | Safety signs and hazard pictorials; Never reach or climb into grain tank while engine is running, Form B.2.12 |
| ISO 11684 B.2.13 | Safety signs and hazard pictorials; Put safety shield in place while grinding knives, Form B.2.13 |
| ISO 11684 B.2.14 | Safety signs and hazard pictorials; Do not step on loading platform if PTO is connected to tractor and engine is running, Form B.2.14 |
| ISO 11684 B.2.15 | Safety signs and hazard pictorials; Wait until all machine components have completely stopped before touching them, Form B.2.15 |
| ISO 11684 B.2.16 | Safety signs and hazard pictorials; Start engine from operator's seat only, Form B.2.16 |
| ISO 11684 B.2.17 | Safety signs and hazard pictorials; Shut off engine and remove key before performing maintenance or repair work, Form B.2.17 |
| ISO 11684 B.2.18 | Safety signs and hazard pictorials; Do not ride on platform or ladder, Form B.2.18 |
| ISO 11684 B.2.19 | Safety signs and hazard pictorials; Riding on this machine is allowed only on a passenger seat and only if the driver's view is not hindered, Form B.2.19 |
| ISO 11684 B.2.20 | Safety signs and hazard pictorials; Always lock ROPS in upright position unless it must be folded down to allow operation underneath trees and bushes, Form B.2.20 |
| ISO 11684 B.2.21 | Safety signs and hazard pictorials; Keep sufficient distance away from electrical power lines, Form B.2.21 |
| ISO 11684 B.2.22 | Safety signs and hazard pictorials; Never reach into the crushing area as long as parts may move, Form B.2.22 |
| ISO 11684 B.2.23 | Safety signs and hazard pictorials; Put safety shield in place while grinding knives, Form B.2.23 |
| ISO 11684 B.2.24 | Safety signs and hazard pictorials; Consult Technical Manual for proper service procedures, Form B.2.24 |
| ISO 11684 B.2.25 | Safety signs and hazard pictorials; Shut off engine and remove spark plug connector before performing maintenance or repair work, Form B.2.25 |
| ISO 11684 B.2.26 | Safety signs and hazard pictorials; Never reach into pick-up area as long as tractor is running with PTO connected, Form B.2.26 |
| ISO 11684 C Vertikal | For use on agricultural machinery and tractors as well as similar machinery, Form C - Pattern shield - Vertikal Empty |
| ISO 11684 C Horizontal | For use on agricultural machinery and tractors as well as similar machinery, Form C - Pattern shield - Horizontal Empty |
| ISO 3862 | Rubber hoses and hose assemblies - Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids |
Status: 09/2023
Success Stories
Wanzl Metallwarenfabrik GmbH
Wanzl shortens research and design times for the development of a new shopping cart by more than 2 hours with the Strategic Parts Management PARTsolutions powered by CADENAS.
MAN Truck & Bus AG
By means of PARTsolutions by CADENAS all parts including complex geometries are traceable across different system and locations of the MAN Truck & Bus AG
SMS group
SMS group avoids duplicates and offers the best possible data quality through PARTsolutions.
Starlinger & Co. GmbH
High reuse of parts in the product development process based on PARTsolutions.