Standards in PARTsolutions
The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.
An overview of the available standards can be found here:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
EN 1092-1 PN 2.5 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-1 PN 6 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 10 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 16 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-1 PN 25 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 40 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 63 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-1 PN 100 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 160 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 250 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 320 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-1 PN 400 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-2 PN 2.5 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 6 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 10 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 16 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 25 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 40 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-2 PN 63 | Round flanges for pipes, fittings, shapes and accessories |
EN 1092-3 PN 6 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-3 PN 10 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-3 PN 16 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-3 PN 25 | Circular flanges for pipes, valves, fittins and accessories |
EN 1092-3 PN 40 | Circular flanges for pipes, valves, fittins and accessories |
EN 1759-1 CLASS 150 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 1759-1 CLASS 300 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 1759-1 CLASS 600 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 1759-1 CLASS 900 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 1759-1 CLASS 1500 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 1759-1 CLASS 2500 | Circular flanges for pipes, valves, fittings and accessories, class designated |
EN 12220 | Flanges for general ventilation |
EN 837-1 | Pressure gauges - Part 1: Bourdon tube pressure gauges |
EN 837-3 | Pressure gauges – Part 3: Diaphragm and capsule pressure gauges |
EN 837 | Flat seal rings |
EN 837 | Water-proof lenses |
EN 10253-1 | Elbow pipes. Pipe fittings, carbon steel |
EN 10253-2 A | Elbow pipes. Butt-welding pipe fittings, carbon steel, type A |
EN 10253-2 B | Elbow pipes. Butt-welding pipe fittings, carbon steel, type B |
EN 10253-3 | Elbow pipes. Pipe fittings, austenitic steel |
EN 10253-4 A | Elbow pipes. Pipe fittings, austenitic steel, model A |
EN 10253-4 B | Elbow pipes. Pipe fittings, austenitic steel, model B |
EN 10253-1 | T-pieces. Pipe fittings, carbon steel |
EN 10253-2 A | T-pieces. Butt-welding pipe fittings, carbon steel, type A |
EN 10253-2 B | T-pieces. Butt-welding pipe fittings, carbon steel, type B |
EN 10253-3 | Branch welded tees, with the same and with reduced branching. Fittings for welding austenitic steel |
EN 10253-3 | Extruded T-pieces, with the same and with reduced branching. Fittings for welding austenitic steel |
EN 10253-3 | T-pieces. Pipe fittings, austenitic steel |
EN 10253-4 A | Branch welded tees, with the same and with reduced branching. Pipe fittings, austenitic steel, model A |
EN 10253-4 B | Branch welded tees, with the same and with reduced branching. Pipe fittings, austenitic steel, model B |
EN 10253-4 A | Extruded T-pieces, with the same and with reduced branching. Fittings for welding austenitic steel, model A |
EN 10253-4 B | Extruded T-pieces, with the same and with reduced branching. Fittings for welding austenitic steel, model B |
EN 10253-4 A | T-pieces. Fittings for welding austenitic steel, model A |
EN 10253-4 B | T-pieces. Fittings for welding austenitic steel, model B |
EN 10253-1 | Eccentric reducers. Pipe fittings, carbon steel |
EN 10253-1 | Concentric reducers, build 1. Pipe fittings, carbon steel |
EN 10253-1 | Concentric reducers, model 2. Pipe fittings, carbon steel |
EN 10253-2 A | Eccentric reducers. Butt-welding pipe fittings, carbon steel, type A |
EN 10253-2 B | Eccentric reducers. Butt-welding pipe fittings, carbon steel, type B |
EN 10253-2 A | Concentric reducers. Butt-welding pipe fittings, carbon steel, type A |
EN 10253-2 B | Concentric reducers. Butt-welding pipe fittings, carbon steel, type B |
EN 10253-3 | Eccentric reducers. Pipe fittings, austenitic steel |
EN 10253-3 | Eccentric reducer (straight). Pipe fittings, austenitic steel |
EN 10253-3 | Concentric reducers. Pipe fittings, austenitic steel |
EN 10253-3 | Concentric reducers (straight). Pipe fittings, austenitic steel |
EN 10253-4 A | Eccentric reducers. Pipe fittings, austenitic steel, model A |
EN 10253-4 B | Eccentric reducers. Pipe fittings, austenitic steel, model B |
EN 10253-4 A | Eccentric reducer (straight). Pipe fittings, austenitic steel, model A |
EN 10253-4 A | Concentric reducers. Pipe fittings, austenitic steel, model A |
EN 10253-4 B | Concentric reducers. Pipe fittings, austenitic steel, model B |
EN 10253-4 A | Concentric reducers (straight). Pipe fittings, austenitic steel, model A |
EN 10253-1 | Dished heads, dished shape. Pipe fittings, carbon steel |
EN 10253-1 | Dished heads, ellipsoidal shape. Pipe fittings, carbon steel |
EN 10253-2 A | Caps. Butt-welding pipe fittings, carbon steel, type A |
EN 10253-2 B | Caps. Butt-welding pipe fittings, carbon steel, type B |
EN 10253-3 | Caps. Pipe fittings, austenitic steel |
EN 10253-4 A | Caps. Pipe fittings, austenitic steel, model A |
EN 10253-4 B | Caps. Pipe fittings, austenitic steel, model B |
EN 1514-1 PN 2.5 | Flat gaskets at of non-metallic material with or without iverts PN 2.5 |
EN 1514-1 PN 6 | Flat gaskets at of non-metallic material with or without iverts PN 6 |
EN 1514-1 PN 10 | Flat gaskets at of non-metallic material with or without iverts PN 10 |
EN 1514-1 PN 16 | Flat gaskets at of non-metallic material with or without iverts PN 16 |
EN 1514-1 PN 25 | Flat gaskets at of non-metallic material with or without iverts PN 25 |
EN 1514-1 PN 40 | Flat gaskets at of non-metallic material with or without iverts PN 40 |
EN 1514-1 PN 63 | Flat gaskets at of non-metallic material with or without iverts PN 63 |
EN 12560-1 Class 150 | Gaskets for class-designated flanges, class 150 |
EN 12560-1 Class 300 | Gaskets for class-designated flanges, class 300 |
EN 12560-1 Class 600 | Gaskets for class-designated flanges, class 600 |
EN 12560-1 Class 900 | Gaskets for class-designated flanges, class 900 |
EN 1514-6 IR | Flanges and their joints - Part 6: Covered serrated metal gaskets for use with steel flanges, form IR |
EN 1514-6 LR | Flanges and their joints - Part 6: Covered serrated metal gaskets for use with steel flanges, form LR |
EN 1514-6 NR | Flanges and their joints - Part 6: Covered serrated metal gaskets for use with steel flanges, form NR |
EN 1514-2 C/I | Gaskets for PN-designed flanges - Part 2: Spiral wound gaskets for use with steel flanges, typ C/I |
EN 1514-2 C/O | Gaskets for PN-designed flanges - Part 2: Spiral wound gaskets for use with steel flanges, typ C/O |
EN 10208-1 | Steel pipes for pipelines for combustible fluids - Part 1: Pipes of requirement class A |
EN 10208-2 | Steel pipes for pipelines for combustible fluids - Part 2: Pipes of requirement class B |
EN 1254-1 5001 A | Copper soldering fittings |
EN 1254-1 5002 A | Copper soldering fittings |
EN 1254-1 5040 | Copper soldering fittings |
EN 1254-1 5041 | Copper soldering fittings |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Branches with spigot end, with little radius |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbow with both side connecting sleeve, with large radius |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbow with both side connecting sleeve, with little radius |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbow with connecting sleeve and spigot end, with little radius |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbows with connecting sleeve from sections |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbow with connecting sleeve and spigot end, with large radius |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Elbows from sections |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Double branches with spigot end |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Double connecting sleeves |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Engle double branches with spigot end |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Weldable couplers |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Connecting sleeves |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Connecting sleeves |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Slip-on sleeves |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Pipes |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Pipes |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Pipes |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Pipes |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Cleaning pipes width round cleaning opening |
EN 1451-1 | Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Eccentric reducers with spigot end |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, pressed sheets, 90° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, pressed sheets, 45° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, pressed sheets, 30° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, segment sheets, 90° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, segment sheets, 45° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, segment sheets, 30° sheet |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, squeezed branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, conical branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, Tee with symmetric, squeezed branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, symmetrical tees with conical branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, tangential tees with conical branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, tee with 45° branch |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, crosspiece (X-pieces) |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, symmetrical reductions |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, asymmetric reductions |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, pipe end caps |
EN 1506 | Sheet metal air ducts and fittings with circular cross-section, fitting end caps (for connectors) |
EN 13190 | Dial thermometer |
EN 12385-4 | Stranded ropes for general lifting application |
EN 13411-1 | Thimbles for steel wire rope slings |
EN 13411-3 A | Ferrules, form A |
EN 13411-3 B | Ferrules, form B |
EN 13411-3 C | Ferrules, form C |
EN 13411-5 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
EN 13411-5 | Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips |
EN 13411-7 | Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket |
EN 13411-9 A | Terminations for steel wire ropes - Safety - Part 9: Solid thimbles, type A |
EN 13411-9 | Terminations for steel wire ropes - Safety - Part 9: Solid thimbles |
EN 13411-9 C | Terminations for steel wire ropes - Safety - Part 9: Solid thimbles, type C |
EN 62275 | Cable ties for electrical installations |
EN 60064 | Lamps for domestic use |
EN 60081 | Double-capped fluorescent lamps |
EN 60809 | Lamps for road vehicles |
EN 4199-003 | Bonding straps for aircraft - Part 003: Bonding strap assemblies with flat braided conductor copper, tin plated -65°C up to 150°C and copper, nickel plated -65°C up to 260°C |
EN 4199-005 | Bonding straps for aircraft - Part 005: Flat braid conductors copper, tin plated -65°C up to 150°C and copper, nickel plated -65°C up to 260°C |
EN 60127-2 | Fuse links |
EN 60127-3 | Sub-miniature fuse-links |
EN 175301-803 A-H | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A, version H |
EN 175301-803 A-K | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A, version K |
EN 175301-803 A-L | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A, version L |
EN 175301-803 A-M | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A, version M |
EN 175301-803 A-S | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A, version S |
EN 175301-803 A | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form A |
EN 175301-803 A-P | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form B, version P |
EN 175301-803 B-H | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form B, version H |
EN 175301-803 B | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form B |
EN 175301-803 C-K | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form C, version K |
EN 175301-803 C-S | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form C, version S |
EN 175301-803 C-H | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form C, version H |
EN 175301-803 C | Rectangular connectors - Flat contacts, 0.8 mm thickness - locking screw not detachable, form C |
EN 50022 | Mounting rails |
EN 60715 C | Mounting rails, C-rails |
EN 60715 G | Mounting rails, G-rails |
EN 60715 TH | Mounting rails, top hat rails |
EN 15800 | Cylindrical helical springs made of round wire, quality specifications for cold coiled compression spring |
EN 16983 | Disc springs |
EN 10029 | Steel sheet, hot rolled, from 3 mm thickness on |
EN 10048 | Hot-rolled steel strip |
EN 10051 | Plates or strips, continuously hot-rolled, without screeding, unalloyed and alloyed steels |
EN 10131 | Flat products, without screed, mild steel and steel with higher yield strength for cold forming |
EN 10132 | Cold rolled narrow steel strips for heat treatment |
EN 10143 | Continuously smeltdunk processed sheet and band of steel |
EN 10202 | Cold rolled packaging sheet metals |
EN 10258 | Cold rolls and cold rows in rods, rustless steel |
EN 10259 | Wide cold rolls and sheets, rustless steel |
EN 13599 | Sheets, metal sheets and strips of copper for use in electro-techniques |
EN 1652 | Copper and copper alloy, plates, strips, blanks for general use |
EN 10028-2 | Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-3 | Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10028-4 | Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
EN 10028-5 | Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
EN 10028-6 | Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
EN 10028-7 | Flat products made of steels for pressure purposes – Part 7: Stainless steels |
EN 10151 | Stainless steel strip for springs |
EN 10363 | Continuously hot-rolled patterned steel strip and plate/sheet cut from wide strip |
EN 1386 | Aluminium and aluminium alloy, plates with rolled-in groove pattern |
EN 10218-2 | Steel wire |
EN 12166 | Steel wire |
EN 13674-1 | Railway applications - Track - Rails - Part 1: Vignole railway rails 46 kg/m and above |
EN 13674-4 | Railway applications - Track - Rails - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m |
EN 10216-1 | Seamless steel tubes for pressure purposes - Part 1: Nonalloy steel tubes with specified room temperature properties |
EN 10216-2 | Seamles steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy tubes with specified elevated temperature properties |
EN 10216-3 | Seamless steel tubes for pressure purposes - Part 3: Alloy fine grain steel tubes |
EN 10217-1 | Welded steel tubes for pressure purposes - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties |
EN 10217-2 | Welded steel tubes for pressure purposes - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10255 | Non-alloy steel tubes suitable for welding and threading |
EN 10297-1 | Seamless circular steel tubes - Part 1: Pipes from non-alloy and alloy steel |
EN 10305-1 | Steel tubes for precision applications - Part 1: Seamless cold drawn tubes |
EN 10305-2 | Steel tubes for precision applications - Part 2: Welded cold drawn tubes |
EN 10305-3 | Steel tubes for precision applications - part 3: welded cold sized tubes |
EN 10305-4 | Steel tubes for precision applications - Part 4 : Seamless cold drawn tubes |
EN 10305-5 | Steel tubes for precision applications - Part 5: Welded and cold sized square and rectangular tubes |
EN 1057 | Copper tube |
EN 12449 | Seamless, round tubes for general purposes |
EN 12451 | Seamless, round tubes for heat exchanger |
EN 13600 SQR-RCT | Seamless copper tubes for electric purposes |
EN 13600 RND | Seamless copper tubes for electric purposes |
EN 10216-4 | Seamless steel tubes for pressure purposes - Part 4: Non-alloy and alloy steel tubes with specified low temperature properties |
EN 10216-5 | Seamless steel tubes for pressure purposes - Part 5: Stainless steel tubes |
EN 10217-3 | Welded steel tubes for pressure purposes – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties; |
EN 10217-4 | Welded steel tubes for pressure purposes - Part 4: Electric welded non-alloy steel tubes with specified low temperature properties |
EN 10217-5 | Welded steel tubes for pressure purposes - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
EN 10217-6 | Welded steel tubes for pressure purposes - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties |
EN 10217-7 | Welded steel tubes for pressure purposes - Part 7: Stainless steel tubes |
EN 10220 | Seamless and welded steel tubes |
EN 10296-1 | Welded circular steel tubes from non-alloy and alloy steel |
EN 1592-1 SQR-RCT | HF seam welded tubes |
EN 1592-1 RND | HF seam welded tubes |
EN 10058 | Hot rolled flat steel bars and steel wide flats for general purposes |
EN 10059 | Hot rolled square steel bars for general purposes |
EN 10060 | Hot-rolled rod from steel |
EN 10061 | Hot-rolled flat hexagon rod from steel for altogether usage |
EN 10140 | Cold roll |
EN 10270-1 | Spring wire |
EN 10270-2 | Steel wire for mechanical springs - Part 2: Oil hardened and tempered spring steel wire |
EN 10270-3 | Spring wire |
EN 10278 | Blank steel products |
EN 12163 | Cupric and copper alloy - rods for altogether usage |
EN 12164 | Copper rods for chipping machining |
EN 12165 | Primary material for welding pieces |
EN 12167 | Profile and rectangle rods |
EN 13601 | Copper rods, bar and wire for general electrical purposes |
EN 485-3 | Aluminium and aluminium alloys; sheets, stripes and plates; Part 3 |
EN 485-4 | Aluminium and aluminium alloys; sheets, stripes and plates; Part 4 |
EN 754-3 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 754-4 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 754-5 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 754-6 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 754-7 | Aluminium and aluminium alloy - Cold drawn rod/bar and tube – Part 7: Seamless tubes |
EN 755-3 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 755-4 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 755-5 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 755-6 | Aluminium and aluminum alloys - Extruded rods and tubes - Part 6: Hexagonal bars |
EN 755-7 | Aluminium and aluminium alloy, pulled rods and pipes |
EN 1976 | Cast unwrought copper products |
EN 4538-3 R | Bearings, spherical plain, in corrosion resisting steel with self lubricating liner, form R |
EN 4538-3 S | Bearings, spherical plain, in corrosion resisting steel with self lubricating liner, form S |
EN 4539-3 R | Bearings, spherical plain, in corrosion resisting steel with self lubricating liner, form R |
EN 4539-3 S | Bearings, spherical plain, in corrosion resisting steel with self lubricating liner, form S |
EN 2753 | Rivet nuts, self-locking, one-sided flange, with cylindrical cutting depth, of alloyed steel, MoS2-smeared |
EN 2753 A | Rivet nuts, self-locking, one-sided flange, with cylindrical cutting depth, of alloyed steel, MoS2-smeared |
EN 2753 B | Rivet nuts, self-locking, one-sided flange, with cylindrical cutting depth, of alloyed steel, MoS2-smeared |
EN 2753 K | Rivet nuts, self-locking, one-sided flange, with cylindrical cutting depth, of alloyed steel, MoS2-smeared |
EN 1664 | Hexagon nuts with clamp part and flange |
EN 1667 | Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread |
EN 1666 | Prevailing torque type hexagon nuts with flange, (with non-metallic insert), with metric fine pitch thread |
EN 1663 | Prevailing torque type hexagon nuts with flange, (with non-metallic insert) |
EN 3763 | Nuts, hexagon self locking, with MJ thread, heat resisting steel, passivated, class 900MPa/315°C |
EN 1661 | Hexagon nuts with flange |
EN 24032 | Hexagon nuts, style 1 - Product grades A and B |
EN 24033 | Hexagon nuts, style 2 - Product grades A and B |
EN 24034 | Hexagon nuts - Product grades C |
EN 24035 | Hexagon thin nuts (chamfered) - Product grades A and B |
EN 24036 | Hexagon thin nuts (unchamfered) - Product grade B |
EN 28673 | Hexagon nuts, style 1, with metric fine pitch thread |
EN 28674 | Hexagon nuts, style 2, with metric fine pitch thread |
EN 28675 | Hexagon thin nuts with metric fine pitch thread, Product grades A and B |
EN 14218 | Hexagon nuts with flange - Metric fine pitch thread |
EN 14399-3 | Hexagon nuts |
EN 14399-4 | Hexagon nuts |
EN 14399-8 | Hexagon nuts |
EN 14399-10 HRD | HRD hex nuts |
EN 2810 | Thin castle nuts |
EN 2879 | Rivet nuts, self-locking |
EN 2881 | Rivet nuts, self-locking |
EN 3435 | Rivet nuts, self-locking, flexible, both side curtailed flange with cylindrical cutting depth of high-strength steel, MoS2-smeared |
EN 4084 | Nuts, anchor, self-locking, fixed, two lug, with counterbore, in alloy steel, cadmium plated, MoS2 lubricated |
EN 10241 Elbow | Elbows, equal |
EN 10241 Elbow 45° | Elbows, equal, 45° |
EN 10241 Elbow AI | Elbows, male and female, equal |
EN 10241 T-piece | Tees, equal |
EN 10241 T-piece | Tees, reducing on the branch |
EN 10241 Cross | Crosses, equal |
EN 10241 Socket, equal, type medium | Sockets, equal, type medium |
EN 10241 Half socket, equal, type medium | Half sockets, equal, type medium |
EN 10241 Half socket | Half sockets, eqyal, type heavy |
EN 10241 Socket, heavey series, normal | Sockets, eqyal, type heavy |
EN 10241 Reducing socket | Reducing sockets |
EN 10241 Hexagonal nipple | Hexagonal nipples, equal |
EN 10241 Hexagon bush | Reducers with hexagon |
EN 10241 Single longscrew | Single longscrew |
EN 10241 Double longscrew | Double longscrew |
EN 10241 Barrel nipple | Barrel nipple |
EN 10241 Thread nipple | Running nipple |
EN 10241 Close nipple | Close nipples |
EN 10241 Pipe nipple | Pipe nipple |
EN 10241 Plug | Plug |
EN 10241 Hexagon head plug | Hexagon head plugs |
EN 10241 Cap | Caps |
EN 10241 Socket union | Socket unions with flat seat, socket unions with taper seat |
EN 10241 Backnut | Hexagon backnuts |
EN 10241 Type 1 | Bends 90° |
EN 10241 Type 1A | Bends 90° |
EN 10241 Type 2 | Springs 112,5° |
EN 10241 Type 3 | Springs 135° |
EN 10241 Type 4 | Springs 157,5° |
EN 10241 Return bend | Return bends |
EN 10242 E1 | Elbows-T branch reduced, pass reduced |
EN 10242 E1 | Elbows-T branch reduced |
EN 10242 E1 | Elbows-T pass reduced |
EN 10242 E1 | Elbow-T |
EN 10242 E2 | Two-elbows-T |
EN 10242 E2 | Two-elbows-T, reduced |
EN 10242 P4 | Locknuts |
EN 10242 T1 | Caps |
EN 10242 T8 | Plugs without edge |
EN 10242 T9 | Plugs with edge |
EN 10242 T11 | Plugs with counterbore |
EN 10242 C1 | Cross pieces |
EN 10242 C1 | Crosses, reduced |
EN 10242 D1 | Short elbow |
EN 10242 D4 | Short elbows with inner and outer thread |
EN 10242 G8 | Long elbows with outer thread |
EN 10242 G1 | Long elbow |
EN 10242 G1/45° | Long elbows 45° |
EN 10242 G4 | Long elbows with inner and outer thread |
EN 10242 G4/45° | Long elbows with inner and outer thread 45° |
EN 10242 M2 | Bushings |
EN 10242 M2 | Bushings, right and left thread |
EN 10242 M4 | Bushings with inner and outer thread |
EN 10242 M2 | Bushings, reduced |
EN 10242 M4 | Bushings with inner and outer thread, reduced |
EN 10242 N8 | Double nipple |
EN 10242 N8 | Double nipples, right-hand and left-hand thread |
EN 10242 N8 | Double nipples, reduced |
EN 10242 N4 | Reducing nipple |
EN 10242 B1 | T-pieces |
EN 10242 B1 | T, pass reduced, branch even |
EN 10242 B1 | T, pass reduced, branch reduced |
EN 10242 B1 | T, branch reduced |
EN 10242 B1 | T, branch heightened |
EN 10242 U1 | Connections, flat sealing |
EN 10242 U11 | Connections, conic sealing |
EN 10242 U12 | Connections with inner and outer thread, conic sealing |
EN 10242 U2 | Connections with inner and outer thread, flat sealing |
EN 10242 Za1 | Angle manifolds |
EN 10242 Za2 | T-manifold |
EN 10242 A1 | Angle |
EN 10242 A1/45° | Angle 45° |
EN 10242 A4/45° | Angles with inner and outer thread 45° |
EN 10242 A4 | Angles with inner and outer thread |
EN 10242 A1 | Angles, reduced |
EN 10242 A4 | Angles with inner and outer thread, reduced |
EN 10242 UA1 | Screwed joints, flat sealing |
EN 10242 UA11 | Screwed joints, conical sealing |
EN 10242 UA12 | Screwed joints with inner and outer thread, conical sealing |
EN 10242 UA2 | Screwed joints with inner and outer thread, flat sealing |
EN 24766 | Slotted set screws with flat point |
EN 27434 | Slottet set screws with cone point |
EN 27435 | Slotted set screws with long dog point |
EN 27436 | Slotted set screws slot and ring-edge |
EN 1662 | Hexagon bolts with flange, small series |
EN 1662 R | Hexagon bolts with flange, small series, form R |
EN 1665 F | Hexagon bolts with flange, Heavy series, Form F |
EN 1665 U | Hexagon bolts with flange, Heavy series, Form U |
EN 24014 | Hexagon head bolts with shank, product groups A and B |
EN 24015 | Hexagon head bolts with shank, reduced shank |
EN 24016 | Hexagon head bolts with shank, product grade C |
EN 24017 | Hexagon bolts threaded to head – product grade A and B |
EN 24018 | Hexagon head screws with thread until head |
EN 28676 | Hexagon bolts threaded to head, metric fine thread |
EN 28765 | Hexagon head bolts with shank, metric fine thread |
EN 14219 | Hexagon bolts with flange with metric fine pitch, small series |
EN 14399-3 | Hexagon set screws |
EN 14399-3 | Hexagon bolt and nut assemblies |
EN 14399-4 | Hexagon set screws |
EN 14399-4 | Hexagon bolt and nut assemblies |
EN 14399-8 | Hexagon fit bolts |
EN 14399-8 HVP | Hexagon fit bolt and nut assemblies |
EN 14399-10 HRC | HRC screws with hex head |
EN 14399-10 HRC | Bolt and nut assemblies with calibrated preload |
EN 2549 | Hexagon fit bolts |
EN 2887 | Sechskantschrauben Gewinde annährend bis Kopfaus korrosionsbeständigem Stahl, passiviert_x000D_ Klasse: 600 Mpa (bei Raumtemperatur)425°C |
EN 3820 | Sechskantschrauben kurze Gewindeaus Titanlegierung, anodisiert, MoS2-geschmiert_x000D_ Klasse: 1 100 MPa (bei Raumtemperatur)/315°C |
EN 2874 | Bolts, large bihexagonal head, close tolerance shank, medium length thread, in heat resisting nickel base alloy, passivated |
EN 4129 | Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated |
EN 3010 | Bolts, hexagonal head, relieved shank, long thread, in resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730°C |
EN 3324 | Bolts, hexagonal head, relieved shank, long thread, in heat resisting steel FE-PM1708 (FV 535) - Classification: 1000 MPa/550°C |
EN 14399-7 HR | HR-countersunk screws |
EN 14399-7 HR | Countersunk screw and nut assemblies |
EN 14399-10 HRC | HRC-Countersunk screws |
EN 14399-10 HRC | Bolt and nut assemblies with calibrated preload |
EN 3381 | 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium, anodized, Mos2 lubricated |
EN 3760 | Screws, 100° countersunk normal head, offset cruciform recess, threaded to head, in heat and corrosion resisting steel, passivated - Classification: 1100 MPa (at ambient temperature)/425°C |
EN 2925 | Bolts, double hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650°C |
EN 2927 | Bolts, double hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-P100HT (Inconel 718) - Classification: 1275 MPa (at ambient temperature)/650°C |
EN 2929 | Bolts, double hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa (at ambient temperature)/730°C |
EN 3323 | Bolts, double hexagonal head, relieved shank, long thread - In heat resisting steel FE-PM38 (FV 535) - Classification: 1000 MPa/550°C |
EN 3327 | Bolts, double hexagonal head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1275 MPa/650°C |
EN 3328 | Bolts, double hexagonal head, close tolerance, medium thread length, in heat resisting steel FE-PM38 (FV535), uncoated - Classification: 1000 MPa/550°C |
EN 3379 | Bolts, double hexagonal head, close tolerance shank, medium thread length, in heat resisting nickel base alloy NI-P101HT (Waspaloy), for increased height nuts - Classification: 1210 MPa (at ambient temperature)/730°C |
EN 3037 | Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized |
EN 3759 | Flat headed screws with torque-set recess |
EN 14399-10 HRC | HRC screws with round head |
EN 14399-10 HRC | Bolt and nut assemblies with calibrated preload |
EN 10024 | Hot-rolled taper flange I sections |
EN 10055 | Hot-rolled steel equal flange tees with radiused root and toes |
EN 10067 | Hot-rolled bulb flats, dimensions and tolerances on shape, dimensions and mass |
EN 10210-2 HFCHS | Hot finished structural hollow sections of non-alloy and fine grain structural steels |
EN 10210-2 HFRHS | Hot finished structural hollow sections of non-alloy and fine grain structural steels |
EN 10210-2 HFEHS | Hot finished structural hollow sections of non-alloy and fine grain structural steels |
EN 10219-2 CFCHS | Cold finished welded structural hollow sections of non-alloy and fine grain steels |
EN 10219-2 CFRHS | Kaltgefertigte quadratische geschweisste Hohlprofile fuer den Stahlbau aus unlegierten_x000D_ Baustaehlen und aus Feinkornbaustaehlen |
EN 10219-2 CFRHS | Cold finished welded structural hollow sections of non-alloy and fine grain steels |
EN 10219-2 CFEHS | Cold formed elliptical welded structural hollow sections of non-alloy and fine grain steels |
EN 10056-1 G | Structural steel equal leg angles |
EN 10056-1 U | Structural steel unequal leg angles |
EN 10162 C | Cold-rolled steel sections, form C |
EN 10162 L | Cold-rolled steel sections, form L |
EN 10162 Omega | Cold-rolled steel sections, form omega |
EN 10162 split tube | Cold-rolled steel sections, form split tube |
EN 10162 U | Cold-rolled steel sections, form U |
EN 10162 Z | Cold-rolled steel sections, form Z |
EN 10279 U | Hot-rolled steel channels, Taper flange steel channels |
EN 10279 UPE | Hot-rolled steel channels, Parallel flange steel channels |
EN 10365 IPE | Parallel flange I sections IPE |
EN 10365 HE | Wide flange beams HE |
EN 10365 HL | Extra wide flange beams HL |
EN 10365 HLZ | Extra wide flange beams HLZ |
EN 10365 HD | Wide flange columns HD |
EN 10365 HP | Wide flange bearing piles HP |
EN 10365 UBP | Wide flange bearing piles UBP |
EN 10365 UB | Universal beams UB |
EN 10365 UC | Universal columns UC |
EN 10365 IPN | Taper flange I sections IPN |
EN 10365 J | Taper flange I sections J |
EN 10365 UPE | Parallel flange channels UPE |
EN 10365 PFC | Parallel flange channels PFC |
EN 10365 UPN | Taper flange channels UPN |
EN 10365 U | Taper flange channels U |
EN 10365 CH | Taper flange channels CH |
EN 10230-1 | Nails with plane pole, round flat head, counter sunk and counter sunk with sinking |
EN 10230-1 | Nails with fluted pole and round flat head and counter sunk |
EN 10230-1 | Nails with four cornered shaft, with round crushing head and counter sunk |
EN 10230-1 | Nails with plane pole and round crushing head |
EN 10230-1 | Nails with fluted pole and round crushing head |
EN 10230-1 | Nails with four cornered shaft and round crushing head |
EN 10230-1 | Lightweight building board pins with plane pole |
EN 10230-1 | Nails with extra large flat head |
EN 10230-1 | Counter sunk nails with blank shaft |
EN 10230-1 | Spring head screw nails |
EN 10230-1 | Plasterboard nails with plane shaft |
EN 10230-1 | Nails with plane, oval shaft and oval crushing head |
EN 3392 | Vollniete mit Universalkopf aus Aluminiumlegierung 2117_x000D_ anodisiert oder chromatiert_x000D_ Metrische Reihe |
EN 3417 | Vollniete mit Universalkopf_x000D_ aus Nickelbasislegierung NI-P11_x000D_ Metrische Reihe |
EN 3419 | Rivets, Solid 100° Countersunk nickel base alloy |
EN 3767 | Blind rivets for rivet nuts, 100° counter sunk, high-temperature steel, passivated, metric row |
EN 4172 P | Paßniete, mit Universalkopf, für Scherbeanspruchung aus Titanlegierung TI_p64001, anodisiert_x000D_ Metrische Reihe Klasse: 1 100 MPa (bei Raumtemperatur)/315°C |
EN 4172 S | Paßniete, mit Universalkopf, für Scherbeanspruchung aus Titanlegierung TI_p64001, anodisiert_x000D_ Metrische Reihe Klasse: 1 100 MPa (bei Raumtemperatur)/315°C |
EN 4173 P | Paßniete, mit 100° normalem Senkkopf, für Scherbeanspruchung_x000D_ aus Titanlegierung TI-P64001, anodisiert_x000D_ Metrische Reihe_x000D_ Klasse: 1 100 MPa (bei Raumtemperatur)/315°C |
EN 4173 S | Paßniete, mit 100° normalem Senkkopf, für Scherbeanspruchung_x000D_ aus Titanlegierung TI-P64001, anodisiert_x000D_ Metrische Reihe_x000D_ Klasse: 1 100 MPa (bei Raumtemperatur)/315°C |
EN 6101 | Rivets, 100° medium flush head, close tolerance Inch series |
EN 22339 A | Taper pins, not hardened, form A |
EN 22339 B | Taper pins, not hardened, form B |
EN 28736 A | Taper pins with inner thread, no hardened, form A |
EN 28736 B | Taper pins with inner thread, no hardened, form B |
EN 22338 | Parallel pins from unhardened steel and stainless steel |
EN 28733 | Parallel pins, with internal thread |
EN 28735 A | Parallel pins with internal thread, hardened, form A |
EN 28735 B | Parallel pins with internal thread, hardened, form B |
EN 28734 | Parallel pins of hardened steel and martensitic stainless steel |
EN 28737 | Taper pins with threaded pin |
EN 2367 | Split pins of steel |
EN 22340 A | Clevis pins without head, form A |
EN 22340 B | Clevis pins without head, form B |
EN 22341 A | Clevis pins with head, form A |
EN 22341 B | Clevis pins with head, form B |
EN 4537-2 D | Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load, form D |
EN 4537-2 F | Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load, form F |
EN 10226-3 1 | Tapered threaded plug gauges with thread profile with full flanks, gauge no. 1 |
EN 10226-3 2 | Tapered threaded plug gauges with thread profile with full flanks and with thread recess, gauge no. 2 |
EN 10226-3 3 | Cylindrical thread ring gauges with thread profile with full flanks, gauge no. 3 |
EN 10226-3 4 | Tapered smooth ring gauges, gauge no. 4 |
EN 10226-3 5 | Tapered thread test gauges with thread profile with shortened flanks, gauge no. 5 |
EN 10226-3 6 | Cylindrical thread test rings with thread profile with shortened flanks, gauge no. 6 |
EN 15566 | Railway applications - Railway rolling stocks - Draw gears |
EN 15566 | Railway applications - Railway rolling stocks - Draw gears and scres couplings; Standard screw couplings with articulated coupling handle in spherical shape to prevent automatic unscrewing |
EN 15566 | Railway applications - Railway rolling stocks - Draw gears and scres couplings; Standard screw couplings with an articulated coupling handle with an upper safety pad against self-acting |
EN 4175 | Collars, flanged swage locking, shear type |
EN 3236 | Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread |
EN 13889 | Forged steel shackles for general lifting purposes |
EN 1677-2 C | Components for slings - Safety - Part 2; Forged steel lifting hooks with latch, Grade 8, form C |
EN 1677-2 E | Components for slings - Safety - Part 2; Forged steel lifting hooks with latch, Grade 8, form E |
EN 1677-3 C | Components for slings - Safety - Part 3; Forged steel self-locking hooks, Grade 8, form C |
EN 1677-3 E | Components for slings - Safety - Part 3; Forged steel self-locking hooks, Grade 8, form E |
EN 1677-5 | Components for slings - Safety - Part 5; Forged steel lifting hooks with latch, Grade 4 |
EN 622-5 | Fibreboards - Part 5: Requirements for dry process boards (MDF) |
EN 636 | Plywoods |
EN 1677-4 A | Components for slings – Safety - Part 4: Links, Grade 8, form A |
EN 1677-4 B | Components for slings – Safety - Part 4: Links, Grade 8, form B |
EN 818-4 1 M | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Mounted single-strand sling chains |
EN 818-4 1 W | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Welded single-strand chain slings |
EN 818-4 2 W | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Two-leg chain slings |
EN 818-4 3 W | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Three-leg chain slings |
EN 818-4 4 W | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Four-leg chain slings |
EN 818-4 2 M | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Mounted two-leg chain slings |
EN 818-4 3 M | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Mounted three-leg chain slings |
EN 818-4 4 M | Short link chains for lifting purposes – Safety – Part 4: Chain slings - Grade 8. Mounted four-leg chain slings |
EN 818-5 1 W | Short link chain for lifting purposes, Safety - Part 5: Chain slings, Grade 4. Welded Single-stranded sling chain |
EN 818-5 2 W | Short link chain for lifting purposes, Safety - Part 5: Chain slings, Grade 4. Welded Double-stranded sling chain |
EN 818-5 3 W | Short link chain for lifting purposes, Safety - Part 5: Chain slings, Grade 4. Welded Three-strand sling chain |
EN 818-5 4 W | Short link chain for lifting purposes, Safety - Part 5: Chain slings, Grade 4. Welded Four-stranded sling chain |
EN 818-2 | Medium tolerance chains for chain slings, grade 8 |
EN 818-3 | Medium tolerance chains for chain slings, grade 4 |
EN 818-7 | Short link chain for lifting purposes – Safety – Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) |
EN 3049 | O-rings, in fluorocarbon rubber (FKM), low compression set - Hardness 80 IRHD |
EN 28738 | Plain washers for clevis pins |
EN 14399-5 | Plain washers |
EN 14399-6 | Platter washer with bevel |
EN 12350-8 1 | Testing fresh concrete - Part 8: Self-compating concrete - Slump-flow test, figure 1 |
EN 12350-8 2 | Testing fresh concrete - Part 8: Self-compating concrete - Slump-flow test, figure 2 |
EN 14399-9 HB | Screw head side washers |
EN 14399-9 HN | Nut side washers |
EN 14399-9 | Deformable disks shaped direct force Scoreboard |
EN 2948 | Washers, tab |
EN 2949 | Washers, wire locking |
EN 3017 | Washers, facing/packing - Heat resisting steel |
EN 3764 | Washers, concave |
EN 559 | Rubber hoses for welding, cutting and allied processes |
DIN EN 560 | Hose connections for equipment for welding, cutting and allied processes, double-hose fittings |
DIN EN 560 | Hose connections for equipment for welding, cutting and allied processes, double-threaded sockets |
DIN EN 560 | Hose connections for equipment for welding, cutting and allied processes, union nuts |
EN 853 | Wire braid reinforced hydraulic type |
EN 854 | Textile reinforced hydraulic types |
EN 856 | Rubber-covered spiral wire reinforced hydraulic type |
EN 14420-2 A | Hose fittings with clamp units - Part 2: Hose side parts of hose tail, form A |
EN 14420-2 B | Hose fittings with clamp units - Part 2: Hose side parts of hose tail, form B |
EN 14420-2 C | Hose fittings with clamp units - Part 2: Hose side parts of hose tail, form C |
EN 14420-3 K-1 | Hose fittings with clamp units - Part 3: Clamp units, pinned |
EN 14420-3 K | Hose fittings with clamp units - Part 3: Clamp units, pinned, form K |
EN 14420-3 S-1 | Hose fittings with clamp units - Part 3: Clamp units, bolted, form S |
EN 14420-3 S-2 | Hose fittings with clamp units - Part 3: Clamp units, bolted, form S |
EN 14420-3 S-3 | Hose fittings with clamp units - Part 3: Clamp units, bolted, form S |
EN 14420-3 S | Hose fittings with clamp units - Part 3: Clamp units, bolted, form S |
EN 14420-4 FL | Hose fittings with clamp units - Part 4: Flange connections, form FL |
EN 14420-4 FV | Hose fittings with clamp units - Part 4: Flange connections, form FV |
EN 14420-4 SC | Hose fittings with clamp units - Part 4: Flange connections, form SC |
EN 14420-4 SC-FL | Hose fittings with clamp units - Part 4: Flange connections, form SC-FL |
EN 14420-4 SC-FLB | Hose fittings with clamp units - Part 4: Flange connections, form SC-FLB |
EN 14420-4 SC-FV | Hose fittings with clamp units - Part 4: Flange connections, form SC-FV |
EN 14420-5 3 | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-5 G | Hose fittings with clamp units - Part 5: Threaded connections; Hose fittings with nut |
EN 14420-5 GA | Hose fittings with clamp units - Part 5: Threaded connections; Hose fitting with threaded pipe outside |
EN 14420-5 1 | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-5 1 | Schlaucharmaturen mit Klemmfassungen - Teil 5: Gewindeanschlüse; _x000D_ Schlauchstutzen mit Rohrgewinde aussen |
EN 14420-5 1 | Schlaucharmaturen mit Klemmfassungen - Teil 5: Gewindeanschlüse; _x000D_ Schlauchstutzen mit Rohrgewinde aussen |
EN 14420-5 A | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-5 B | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-5 C | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-5 D | Hose fittings with clamp units - Part 5: Threaded connections; Hose nozzle with nut with internal threads |
EN 14420-6 2 | Hose fittings with clamp units-Part 6: TW tank truck couplings; O-ring pieces DN 50 and DN 80 (Pos. No. 2) |
EN 14420-6 6 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Cap DN 50 and DN 80 (Pos. No. 6) |
EN 14420-6 6 DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Cap DN 100 (Pos. No. 6) |
EN 14420-6 5 | Hose fittings with clamp units-Part 6: TW tank truck couplings; O-rings (Pos. No. 5) |
EN 14420-6 1 VK | Hose fittings with clamp units-Part 6: TW tank truck couplings, Housing (Pos. No. 1) |
EN 14420-6 4 | Hose fittings with clamp units-Part 6: TW tank truck couplings; Levers DN 50 and DN 80 (Pos. No. 4) |
EN 14420-6 A1 DN 100 | Hose fittings with clamp units - Part 6: TW Tank truck couplings; Surveyor DN 100 for a O-ring piece with clamping ring and lever |
EN 14420-6 A1 | Hose fittings with clamp units - Part 6: TW Tank truck couplings; Surveyor for O-ring piece DN 50 and DN 80 |
EN 14420-6 A | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor A for caps with DN 50 and DN 80 |
EN 14420-6 A DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor A for caps with DN 100 |
EN 14420-6 B DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor B for clamping rings DN 100 |
EN 14420-6 B1 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor B1 for O-ring pieces with DN 50 and DN 80 |
EN 14420-6 B | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor B for clamping rings DN 50 and DN 80 |
EN 14420-6 A1 DN 100 (LKS) | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor A1 for curve bars and plugs with DN 100 |
EN 14420-6 A1 (LKS) | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor A1 for curve bars and plugs with DN 50 and DN 80 |
EN 14420-6 B1 (LKS) | Hose fittings with clamp units - Part 6: TW tank truck couplings; Surveyor B1 for curve bars and plugs with DN 50, DN 80 and DN 100 |
EN 14420-6 MB DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Bank cap DN 100 |
EN 14420-6 MB | Hose fittings with clamp units - Part 6: TW tank truck couplings; Bank cap DN 50 and DN 80 |
EN 14420-6 MK | Hose fittings with clamp units-Part 6: TW tank truck couplings; Female couplings (Form MK), DN 50 and DN 80 |
EN 14420-6 MK DN 100 | Hose fittings with clamp units-Part 6: TW tank truck couplings; Female coupling (Form MK) DN 100 |
EN 14420-6 MKS | Hose fittings with clamp units-Part 6: TW tank truck couplings; Hose fittings with TW couplings, Form MKS |
EN 14420-6 MKST | Hose fittings with clamp units-Part 6: TW tank truck couplings; Hose nozzle with TW-coupling, Form MKST |
EN 14420-6 6 | Hose fittings with clamp units-Part 6: TW tank truck couplings; Protection rings |
EN 14420-6 3 | Hose fittings with clamp units-Part 6: TW tank truck couplings; Clamping rings DN 50 and DN 80 (Pos. No. 3) |
EN 14420-6 7 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Stopper DN 50 and DN 80 (Pos. No. 7) |
EN 14420-6 7 DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Stopper DN 100 (Pos. No. 7) |
EN 14420-6 VB DN 100 | Hose fittings with clamp units - Part 6: TW tank truck couplings; Male part as blind stopper DN 100 |
EN 14420-6 VB | Hose fittings with clamp units - Part 6: TW tank truck couplings; Male part as blind stopper DN 50 and DN 80 |
EN 14420-6 VK | Hose fittings with clamp units-Part 6: TW tank truck couplings; Male couplings (Form VK) |
EN 14420-6 VKS | Hose fittings with clamp units-Part 6: TW tank truck couplings; Hose fittings with TW couplings, Form VKS |
EN 14420-6 VKST | Hose fittings with clamp units-Part 6: TW tank truck couplings; Hose nozzle with TW-coupling, Form VKST |
EN 14420-7 2 | Hose fittings with clamp units - Part 7: Levers, pos. No. 2 |
EN 14420-7 3 | Hose fittings with clamp units - Part 7: Bolts, pos. No. 3 |
EN 14420-7 4 | Hose fittings with clamp units - Part 7: Rings, pos. No. 4 |
EN 14420-7 5 | Hose fittings with clamp units - Part 7: Gaskets, pos. No. 5 |
EN 14420-7 DF | Hose fittings with clamp units - Part 7: Cam locking couplings, nut clutch form DF |
EN 14420-7 AF | Hose fittings with clamp units - Part 7: Cam locking couplings, form AF |
EN 14420-7 BF | Hose fittings with clamp units - Part 7: Cam locking couplings, nut clutch form BF |
EN 14420-7 FF | Hose fittings with clamp units - Part 7: Cam locking couplings, form FF |
EN 14420-7 DW | Hose fittings with clamp units - Part 7: Cam locking couplings, nut clutch form DW |
EN 14420-7 AW | Hose fittings with clamp units - Part 7: Cam locking couplings, form AW |
EN 14420-7 CC | Hose fittings with clamp units - Part 7: Cam locking couplings, nut clutch form CC |
EN 14420-7 EC | Hose fittings with clamp units - Part 7: Cam locking couplings, form EC |
EN 14420-7 DC | Hose fittings with clamp units - Part 7: Cam locking couplings, nut clutch form DC |
EN 14420-7 DP | Hose fittings with clamp units - Part 7: Cam locking couplings, form DP |
EN 60684-3 | Flexible insualating sleeving Part 3: Specifications for individual types of sleeving Sheets 100 to 105: Extruded PVC sleeving |
EN 14423 KBS-1 | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form KBS |
EN 14423 KBS | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form KBS |
EN 14423 SS | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar |
EN 14423 SFL | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SFL |
EN 14423 SFV | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SFV |
EN 14423 SG | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SG |
EN 14423 DG | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form DG |
EN 14423 SR | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SR |
EN 14423 SRI | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SRI |
EN 14423 SRA | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form SRA |
EN 14423 FL | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form FL |
EN 14423 FV | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form FV |
EN 14423 G | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form G |
EN 14423 GA | Clamp type coupling assemblies for use with steam hoses rated for pressure up to 18 bar, form GA |
EN 13698-1 | Pallet production specification - Teil 1; Construction specification for 800 mm x 1200 mm flat wooden pallets |
EN 13698-2 skid pallet | Pallet production specification - Teil 2; Construction specification for 1000 mm x 1200 mm flat wooden pallets |
EN 13698-2 window plate | Pallet production specification - Teil 2; Construction specification for 1000 mm x 1200 mm flat wooden pallets |
Status: 09/2023
Success Stories
Wanzl Metallwarenfabrik GmbH
MAN Truck & Bus AG
SMS group