Standards in PARTsolutions
The Strategic Parts Management PARTsolutions by CADENAS offers engineers access to engineering data from all the most used standard components.
An overview of the available standards can be found here:
AIANASANANSIASASMEASNABSICSNDASTDINDIN_EN_ISOENGBGOSTISISOJB-TJISKSLNMSMS_LIBRARYNASNASMNFNF_EN_ISONIHSNSAPNSAESISUICUNECEUNIUNI_EN_ISOVG
Included
| EN 1661 | Hexagon nuts with flange |
| EN 1664 | Hexagon nuts with clamp part and flange |
| EN 1667 | Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread |
| ISO 7040 | Prevailing torque type hexagon nuts, (with non-metallic insert), style1 |
| ISO 7042 | Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 |
| ISO 4032 | Hexagon nuts, style 1 - Product grades A and B |
| ISO 4033 | Hexagon nuts, style 2 - Product grades A and B |
| ISO 4035 | Hexagon thin nuts (chamfered) - Product grades A and B |
| ISO 4036 | Hexagon thin nuts (unchamfered) - Product grade B |
| ISO 8673 | Hexagon nuts, type 1, with metric fine pitch thread |
| ISO 8674 | Hexagon nuts, type 2, with metric fine pitch thread |
| ISO 8675 | Hexagon thin nuts with metric fine pitch thread, Product grades A and B |
| EN 1666 | Prevailing torque type hexagon nuts with flange, (with non-metallic insert), with metric fine pitch thread |
| ISO 10513 | Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread – Property classes 8, 10 and 12 |
| ISO 7719 | Prevailing torque type (all-metal hexagon nuts), type 1 – property classes 5, 8 and 10 |
| ISO 10512 | Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch |
| ISO 10511 | Prevailing torque type hexagon, thin nuts, (with non-metallic insert) |
| ISO 4034 | Hexagon nuts - Product grades C |
| CSN 02 1411 | Hexagon slotted and castle nuts (without cylindric castle) |
| CSN 02 1411 | Hexagon slotted and castle nuts (with cylindric castle) |
| CSN 02 1412 | Hexagon low slotted and castle nuts (without cylindric castle) |
| CSN 02 1412 | Hexagon low slotted and castle nuts (with cylindric castle) |
| CSN 02 1431 | Domed cap nut |
| CSN 02 1441 | Round nuts with set pin hole in side |
| CSN 02 1444 | Sloted round nuts |
| CSN 02 1449 | Slot nuts |
| CSN 02 1461 | Knurled nuts |
| CSN 02 1462 | Flat knurled nuts |
| CSN 02 2562 | Tight splines with tolerances e7 or h9 |
| CSN 02 2575 | Feather keys with one holding screws |
| ISO 7090 | Plain washers, chamfered, normal series, product grade A |
| ISO 7089 | Plain washers, normal series, product grade A |
| ISO 7091 | Plain washers, normal series, product grade C |
| ISO 7092 | Plain washers, small series, product grade A |
| ISO 7093-1 | Plain washers, large series, product grade A |
| ISO 7093-2 | Plain washers, large series, product grade C |
| ISO 7094 | Plain washers, extra large series, product grade C |
| ISO 10673 L | Plain washers for screw and washer assemblies, form L |
| ISO 10673 N | Plain washers for screw and washer assemblies, form N |
| ISO 10673 S | Plain washers for screw and washer assemblies, form S |
| EN 28738 | Plain washers for clevis pins |
| CSN 02 1740 | Spring washers of sqare sectionals area |
| CSN 02 1741 | Spring washers of rectangular sectionals area |
| ISO 1207 | Slotted cheese head screws, product grade A |
| ISO 7048 H | Cross recessed cheese head screws, form H |
| ISO 7048 Z | Cross recessed cheese head screws, form Z |
| ISO 1580 | Slotted pan head screws, product grade A |
| ISO 7045 H | Pan head screws with cross recess, form H – product grade A |
| ISO 7045 Z | Pan head screws with cross recess, form Z – product grade A |
| ISO 21269 | Hexalobular socket head cap screws with fine pitch thread |
| ISO 4762 | Hexagon socket head cap screws |
| ISO 14579 | Hexalobular socket head cap screws |
| ISO 14580 | Hexalobular socket cheese head screws, low head |
| ISO 7380-1 | Button head screws - Part 1: Hexagon socket button head screws |
| ISO 14583 | Hexalobular socket pan head screws |
| CSN 02 1128 | Šrouby s válcovou hlavou s dírami v hlavì |
| DIN 920 | Slotted pan head screws with small head |
| EN 1665 F | Hexagon bolts with flange, Heavy series, Form F |
| ISO 4014 | Hexagon head bolts with shank, product groups A and B |
| ISO 4017 | Hexagon bolts with thread to the head |
| ISO 8676 | Hexagon bolts with thread to the head, metric fine thread |
| ISO 8765 | Hexagon head bolts with shank, metric fine thread |
| ISO 4018 | Hexagon head screws with thread until head |
| ISO 4016 | Hexagon head bolts with shank |
| EN 24015 | Hexagon head bolts with shank, reduced shank |
| CSN 02 1104 | Bright hexagon bolts with hole in the head |
| CSN 02 1105 | Bright hexagon bolts with slot |
| CSN 02 1105 B | Bright hexagon bolts with slot |
| ISO 10642 | Hexagon socket countersunk head screws with reduced loadability |
| ISO 14584 | Hexalobular socket raised countersunk head screws |
| ISO 2009 | Slotted countersunk flat head screws, product grade A |
| ISO 7046-1 H | Countersunk flat head screws (common head style) with type H cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
| ISO 7046-1 Z | Countersunk flat head screws (common head style) with type Z cross recess - Product grade A – Part 1: Steel screws of property class 4.8 |
| ISO 7046-2 H1 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
| ISO 7046-2 H2 | Countersunk flat head screws (common head style) with type H cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
| ISO 7046-2 Z1 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 1 |
| ISO 7046-2 Z2 | Countersunk flat head screws (common head style) with type Z cross recess – Product grade A – Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws, series 2 |
| ISO 2010 | Slotted raised countersunk head screws (common head style) – product grade A |
| ISO 7047 H | Slotted raised countersunk raised head screws (common head style) with type H cross recess, product grade A |
| ISO 7047 Z | Slotted raised countersunk raised head screws (common head style) with type Z cross recess, product grade A |
| CSN 02 1121 | Square head bolts with half dog point and rounded end |
| CSN 02 1122 | Square heads bolts with collar and half dog point with rounded end |
| CSN 02 1161 | Knurled thumb screws |
| CSN 02 1161 | Knurled thumb screws, form B |
| CSN 02 1162 | Flat knurled screws |
| CSN 02 1167 | Eye bolts |
| CSN 02 1174 | Studs - Metal end = 1d |
| CSN 02 1174 | Studs - Metal end = 1d |
| CSN 02 1176 | Studs - Metal end = 1.25d |
| CSN 02 1176 | Studs - Metal end = 1.25d |
| CSN 02 1178 | Studs for aluminium alloys |
| CSN 02 1178 | Studs for aluminium alloys |
| CSN 02 1341 | T-bolts (M10 - M36x4) |
| CSN 02 1341 | T-bolts (M42x3 - M100x4) |
| ISO 4026 | Hexagon socket set screws with flat point |
| ISO 4027 | Hexagon socket set screws with cone point |
| ISO 4028 | Hexagon socket set screws with dog point |
| ISO 4029 | Hexagon socket set screws with cup point |
| ISO 2342 | Slotted headless screws with shank |
| EN 24766 | Slotted set screws with flat point |
| EN 27434 | Slottet set screws with cone point |
| EN 27435 | Slotted set screws with long dog point |
| EN 27436 | Slotted set screws slot and ring-edge |
| CSN 02 1187 | Hexagon socket set screws with cone point |
| ISO 1479 C | Hexagon head tapping screws, form C |
| ISO 1479 F | Hexagon head tapping screws, form F |
| ISO 1481 C | Slotted pan head tapping screws, form C |
| ISO 1481 F | Slotted pan head tapping screws, form F |
| ISO 1482 C | Slotted countersunk flat head tapping screws, form C |
| ISO 1482 F | Slotted countersunk flat head tapping screws, form F |
| ISO 1483 C | Slotted raised countersunk oval head tapping screws, form C |
| ISO 1483 F | Slotted raised countersunk oval head tapping screws, form F |
| ISO 7049 C-H | Cross recessed pan head tapping screws, form c-H |
| ISO 7049 C-Z | Cross recessed pan head tapping screws, form C-Z |
| ISO 7049 F-H | Cross recessed pan head tapping screws, form F-H |
| ISO 7049 F-Z | Cross recessed pan head tapping screws, form F-Z |
| ISO 7050 C-H | Cross recessed countersunk flat head tapping screws, form C-H |
| ISO 7050 C-Z | Cross recessed countersunk flat head tapping screws, form C-Z |
| ISO 7050 F-H | Cross recessed countersunk flat head tapping screws, form F-H |
| ISO 7050 F-Z | Cross recessed countersunk flat head tapping screws, form F-Z |
| ISO 7051 C-H | Cross recessed raised countersunk oval head tapping screws, form C-H |
| ISO 7051 C-Z | Cross recessed raised countersunk oval head tapping screws, form C-Z |
| ISO 7051 F-H | Cross recessed raised countersunk oval head tapping screws, form F-H |
| ISO 7051 F-Z | Cross recessed raised countersunk oval head tapping screws, form F-Z |
| ISO 15480 | Hexagon washer head drilling screws with tapping screw thread |
| ISO 15481 H | Cross recessed pan head drilling screws, form H |
| ISO 15483 H | Cross recessed raised countersunk head drilling screws with tapping screw thread, form H |
| ISO 15483 Z | Cross recessed raised countersunk head drilling screws with tapping screw thread, form Z |
| ISO 15482 H | Cross recessed countersunk head drilling screws with tapping, form H |
| ISO 15482 Z | Cross recessed countersunk head drilling screws with tapping, form Z |
| ISO 8734 | Parallel pins of hardened steel and martensitic stainless steel |
| ISO 8735 A | Parallel pins with internal thread, hardened, form A |
| ISO 8735 B | Parallel pins with internal thread, hardened, form B |
| ISO 2338 | Parallel pins from unhardened steel and stainless steel |
| ISO 8733 | Parallel pins, with internal thread |
| EN 22339 A | Taper pins, not hardened, form A |
| EN 22339 B | Taper pins, not hardened, form B |
| EN 28736 A | Taper pins with inner thread, no hardened, form A |
| EN 28736 B | Taper pins with inner thread, no hardened, form B |
| ISO 8737 | Taper pins with threaded pin |
| ISO 8739 | Grooved pins, full-length parallel growed, with pilot |
| ISO 8744 | Grooved pins, full-lenght parallel growed |
| ISO 8745 | Grooved pins, half length taper grooved |
| ISO 8740 | Cylindrical grooved pins with chamfer |
| ISO 8741 | Grooved pins, half length reverse grooved |
| ISO 8742 | Grooved pins, 1/3 growed, with pilot |
| ISO 8752 | Clamping pins - slotted, heavy duty |
| ISO 13337 | Spring-type straight pins, slotted, light duty |
| ISO 2340 A | Clevis pins without head, form A |
| ISO 2340 B | Clevis pins without head, form B |
| ISO 2341 A | Clevis pins with head, form A |
| ISO 2341 B | Clevis pins with head, form B |
| CSN - STN |
Status: 09/2023
Success Stories
Wanzl Metallwarenfabrik GmbH
Wanzl shortens research and design times for the development of a new shopping cart by more than 2 hours with the Strategic Parts Management PARTsolutions powered by CADENAS.
MAN Truck & Bus AG
By means of PARTsolutions by CADENAS all parts including complex geometries are traceable across different system and locations of the MAN Truck & Bus AG
SMS group
SMS group avoids duplicates and offers the best possible data quality through PARTsolutions.
Starlinger & Co. GmbH
High reuse of parts in the product development process based on PARTsolutions.